Double gyre - LCS with particles

Drift of particles in an idealised (analytical) eddy current field, plotted on top of the LCS. This takes some minutes to calculate.

from datetime import datetime, timedelta
import matplotlib.pyplot as plt

from opendrift.readers import reader_double_gyre
from opendrift.models.oceandrift import OceanDrift

Setting some parameters

duration = timedelta(seconds=12)  # T
time_step=timedelta(seconds=.5)
time_step_output=timedelta(seconds=.5)
delta=.02  # spatial resolution
steps = int(duration.total_seconds()/
            time_step_output.total_seconds() + 1)

o = OceanDrift(loglevel=20)
12:54:55 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)

Note that Runge-Kutta here makes a difference to Euler scheme

o.set_config('drift:advection_scheme', 'runge-kutta4')
o.disable_vertical_motion()
o.set_config('environment:fallback:land_binary_mask', 0)

double_gyre = reader_double_gyre.Reader(epsilon=.25, omega=0.628, A=0.1)
print(double_gyre)
o.add_reader(double_gyre)
12:54:55 INFO    opendrift.models.oceandrift:377: Setting config: drift:vertical_advection -> False
12:54:55 INFO    opendrift.models.oceandrift:377: Setting config: drift:vertical_mixing -> False
===========================
Reader: double_gyre
Projection:
  +proj=stere +lat_0=0 +lon_0=0 +lat_ts=0 +units=m +a=6.371e+06 +e=0 +no_defs
Coverage: [degrees]
  xmin: 0.000000   xmax: 2.000000
  ymin: 0.000000   ymax: 1.000000
  Corners (lon, lat):
    (  0.00,   0.00)  (  0.00,   0.00)
    (  0.00,   0.00)  (  0.00,   0.00)
Vertical levels [m]:
  Not specified
Available time range:
  start: None   end: None   step: None
Variables:
  x_sea_water_velocity
  y_sea_water_velocity
  sea_water_speed - derived from ['x_sea_water_velocity', 'y_sea_water_velocity']
===========================

Calculate Lyapunov exponents

times = [double_gyre.initial_time +
         n*time_step_output for n in range(steps)]
lcs = o.calculate_ftle(time=times, time_step=time_step,
                       duration=duration, delta=delta, RLCS=False)
12:54:55 INFO    opendrift.models.basemodel:4670: No reader provided, using first available:
12:54:55 INFO    opendrift.models.basemodel:4672: double_gyre
12:54:55 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:00
12:54:55 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:54:55 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:54:55 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:54:55 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:54:55 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:54:55 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:54:55 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:54:55 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:54:55 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:54:59 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:54:59 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:54:59 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:54:59 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:54:59 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:54:59 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:00 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:00 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:00 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:00 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:12 to 2000-01-01 00:00:00)
12:55:00 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:00 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:00 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:00 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:00 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:00 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:00 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:00 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:00 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:00 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:00 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:00 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:00 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:00 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:00 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:00 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:00 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:00 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314157 (min) 0.314159 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350363 (min) 0.458417 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:00 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:00 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:00 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:00 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:00 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:00 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:00 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:00 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
12:55:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314104 (min) 0.313942 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346022 (min) 0.449706 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:00 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621136e-12 degrees.
12:55:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314138 (min) 0.313976 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346012 (min) 0.449184 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4252114301131e-12 degrees.
12:55:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314149 (min) 0.314152 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340642 (min) 0.436609 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:00 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:00 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:00 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:00 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:00 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:00 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:00 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:00 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:00 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:00 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:00 DEBUG   opendrift.models.basemodel:2057:               -6.791877769091565e-20 <- latitude  -> 8.892453777469594e-06
12:55:00 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7903075709058422e-05
12:55:00 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:00 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4967 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605086e-12 degrees.
12:55:00 DEBUG   opendrift.readers.basereader.variables:829: Masking 33 elements outside coverage
12:55:00 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 33 elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 33 elements
12:55:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 33 elements
12:55:00 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314051 (min) 0.313882 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340645 (min) 0.437706 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:00 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:00 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:00 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:00 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:00 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:00 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:00 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:00 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615835e-12 degrees.
12:55:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314125 (min) 0.314158 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334398 (min) 0.423067 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:00 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626557e-12 degrees.
12:55:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314154 (min) 0.314152 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334463 (min) 0.422756 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626562e-12 degrees.
12:55:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314151 (min) 0.313815 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32834 (min) 0.404284 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:00 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:00 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:00 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:00 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:00 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:00 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:00 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:00 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:00 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:00 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:00 DEBUG   opendrift.models.basemodel:2057:               -6.317631038286484e-20 <- latitude  -> 8.935138653086711e-06
12:55:00 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.794532751525605e-05
12:55:00 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:00 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4964 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642673e-12 degrees.
12:55:00 DEBUG   opendrift.readers.basereader.variables:829: Masking 36 elements outside coverage
12:55:00 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 36 elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 36 elements
12:55:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 36 elements
12:55:00 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314152 (min) 0.314148 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32844 (min) 0.404971 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:00 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:00 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:00 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:00 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:00 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:00 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:00 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:00 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.373056394177553e-12 degrees.
12:55:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313917 (min) 0.313784 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322764 (min) 0.384431 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:00 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.364363888188284e-12 degrees.
12:55:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313829 (min) 0.313791 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322777 (min) 0.384356 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690964e-12 degrees.
12:55:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314041 (min) 0.314108 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318125 (min) 0.361744 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:00 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:00 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:00 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:00 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:00 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:00 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:00 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:00 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:00 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:00 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:00 DEBUG   opendrift.models.basemodel:2057:               -5.8544892557527e-20 <- latitude  -> 8.958543111123946e-06
12:55:00 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7964127567209288e-05
12:55:00 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:00 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4967 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32959386423121e-12 degrees.
12:55:00 DEBUG   opendrift.readers.basereader.variables:829: Masking 33 elements outside coverage
12:55:00 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 33 elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 33 elements
12:55:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 33 elements
12:55:00 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313711 (min) 0.313931 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318156 (min) 0.360175 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:00 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:00 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:00 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:00 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:00 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:00 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:00 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:00 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798271e-12 degrees.
12:55:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314156 (min) 0.313703 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31514 (min) 0.336394 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:00 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195809004e-12 degrees.
12:55:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314121 (min) 0.313681 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31511 (min) 0.336334 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195809004e-12 degrees.
12:55:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314059 (min) 0.314028 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313972 (min) 0.314468 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:00 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:00 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:00 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:00 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:00 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:00 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:00 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:00 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:00 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:00 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:00 DEBUG   opendrift.models.basemodel:2057:               -5.240932928811748e-20 <- latitude  -> 8.971787574516507e-06
12:55:00 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7972625336327005e-05
12:55:00 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:00 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4974 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.22745691885709e-12 degrees.
12:55:00 DEBUG   opendrift.readers.basereader.variables:829: Masking 26 elements outside coverage
12:55:00 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 26 elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:00 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 26 elements
12:55:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 26 elements
12:55:00 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:00 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313986 (min) 0.313994 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314038 (min) 0.313997 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:00 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:00 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:00 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:00 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:00 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:01 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:01 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:01 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.233976298349002e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313897 (min) 0.313258 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315074 (min) 0.339212 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.216591286370464e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314063 (min) 0.313245 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315103 (min) 0.339067 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.21659128637049e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313761 (min) 0.314124 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318117 (min) 0.362996 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:01 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:01 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:01 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:01 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:01 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:01 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:01 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:01 DEBUG   opendrift.models.basemodel:2057:               -4.4290457382484103e-20 <- latitude  -> 8.979512443669965e-06
12:55:01 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976381854085155e-05
12:55:01 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:01 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4982 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.231803171851683e-12 degrees.
12:55:01 DEBUG   opendrift.readers.basereader.variables:829: Masking 18 elements outside coverage
12:55:01 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 18 elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 18 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 18 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313639 (min) 0.313765 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318316 (min) 0.361191 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:01 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:01 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:01 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:01 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:01 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057332915e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313411 (min) 0.314077 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322982 (min) 0.38143 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.233976298348361e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313144 (min) 0.314068 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322862 (min) 0.383311 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.236149424846293e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312705 (min) 0.313512 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328754 (min) 0.404214 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:01 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:01 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:01 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:01 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:01 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:01 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:01 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:01 DEBUG   opendrift.models.basemodel:2057:               -3.551886887949365e-20 <- latitude  -> 8.984798933589139e-06
12:55:01 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797780556079282e-05
12:55:01 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:01 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4988 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24918818383022e-12 degrees.
12:55:01 DEBUG   opendrift.readers.basereader.variables:829: Masking 12 elements outside coverage
12:55:01 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 12 elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 12 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 12 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314152 (min) 0.313452 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328566 (min) 0.400297 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:01 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:01 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:01 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:01 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:01 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.260053816316825e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313466 (min) 0.31321 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334922 (min) 0.42452 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.251361310327514e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313323 (min) 0.313155 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334909 (min) 0.423716 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.251361310327542e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313561 (min) 0.313242 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340697 (min) 0.439622 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:01 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:01 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:01 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:01 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:01 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:01 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:01 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:01 DEBUG   opendrift.models.basemodel:2057:               -2.6135995106957177e-20 <- latitude  -> 8.987290109084847e-06
12:55:01 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977992537304218e-05
12:55:01 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:01 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4993 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.264400069311463e-12 degrees.
12:55:01 DEBUG   opendrift.readers.basereader.variables:829: Masking 7 elements outside coverage
12:55:01 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 7 elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 7 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 7 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314075 (min) 0.314012 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340527 (min) 0.427122 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:01 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:01 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:01 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:01 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:01 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798029e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314076 (min) 0.313982 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346191 (min) 0.453925 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195808778e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31403 (min) 0.313904 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346007 (min) 0.453329 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.268746322306097e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314093 (min) 0.313974 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350333 (min) 0.462692 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:01 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:01 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:01 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:01 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:01 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:01 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:01 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:01 DEBUG   opendrift.models.basemodel:2057:               -2.3237522455384726e-20 <- latitude  -> 8.989518472967643e-06
12:55:01 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797745234426238e-05
12:55:01 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:01 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.279611954792688e-12 degrees.
12:55:01 DEBUG   opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
12:55:01 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 5 elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 5 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 5 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314028 (min) 0.31412 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350358 (min) 0.458405 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:01 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:01 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:01 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:01 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:01 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.288304460781962e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313777 (min) 0.314055 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353034 (min) 0.464794 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.281785081290035e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313708 (min) 0.314038 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352847 (min) 0.464024 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.28395820778732e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31364 (min) 0.314058 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353802 (min) 0.465764 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:01 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:01 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:01 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:01 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:01 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:01 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:01 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:01 DEBUG   opendrift.models.basemodel:2057:               -1.9404839422486143e-20 <- latitude  -> 8.990601234738437e-06
12:55:01 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976364708005416e-05
12:55:01 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:01 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.292650713776623e-12 degrees.
12:55:01 DEBUG   opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
12:55:01 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 5 elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 5 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 5 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313521 (min) 0.314 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353365 (min) 0.467284 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:01 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:01 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:01 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:01 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:01 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.299170093268566e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313866 (min) 0.314107 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352224 (min) 0.466348 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29699696677061e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313825 (min) 0.314159 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35189 (min) 0.465547 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.296996966771251e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314049 (min) 0.314118 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.349886 (min) 0.459848 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:01 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:01 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:01 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:01 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:01 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:01 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:01 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:01 DEBUG   opendrift.models.basemodel:2057:               -1.8646651773938155e-20 <- latitude  -> 8.990606114181837e-06
12:55:01 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7974647905272877e-05
12:55:01 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:01 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4994 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472759874e-12 degrees.
12:55:01 DEBUG   opendrift.readers.basereader.variables:829: Masking 6 elements outside coverage
12:55:01 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 6 elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 6 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 6 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313763 (min) 0.314018 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350275 (min) 0.460266 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:01 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:01 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:01 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:01 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:01 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252494e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314061 (min) 0.313808 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345887 (min) 0.451806 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.307862599257819e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314083 (min) 0.313888 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34602 (min) 0.45136 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252462e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31398 (min) 0.313934 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340789 (min) 0.43866 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:01 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:01 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:01 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:01 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:01 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:01 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:01 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:01 DEBUG   opendrift.models.basemodel:2057:               -1.557733559176034e-20 <- latitude  -> 8.98937864054348e-06
12:55:01 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797193203591661e-05
12:55:01 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:01 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4984 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.318728231744437e-12 degrees.
12:55:01 DEBUG   opendrift.readers.basereader.variables:829: Masking 16 elements outside coverage
12:55:01 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 16 elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 16 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 16 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313894 (min) 0.314057 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34082 (min) 0.439696 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:01 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:01 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:01 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:01 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:01 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32524761123642e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313727 (min) 0.314071 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334553 (min) 0.42432 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.320901358241785e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313772 (min) 0.314149 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334484 (min) 0.424235 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.323074484739066e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313978 (min) 0.314158 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328474 (min) 0.405594 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:01 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:01 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:01 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:01 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:01 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:01 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:01 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:01 DEBUG   opendrift.models.basemodel:2057:               -1.6555452720067012e-20 <- latitude  -> 8.990739846888173e-06
12:55:01 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796742358985987e-05
12:55:01 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:01 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4903 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728366e-12 degrees.
12:55:01 DEBUG   opendrift.readers.basereader.variables:829: Masking 97 elements outside coverage
12:55:01 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 97 elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 97 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 97 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313712 (min) 0.314024 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328324 (min) 0.405477 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:01 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:01 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:01 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:01 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:01 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.34263262321495e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314106 (min) 0.313642 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322722 (min) 0.384211 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.342632623214958e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314098 (min) 0.313882 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322777 (min) 0.384147 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.338286370220312e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314116 (min) 0.313951 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318142 (min) 0.361638 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:01 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:01 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:01 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:01 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:01 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:01 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:01 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:01 DEBUG   opendrift.models.basemodel:2057:               -2.0293307414037855e-20 <- latitude  -> 8.99141603752451e-06
12:55:01 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.795956501301291e-05
12:55:01 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:01 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.349152002706938e-12 degrees.
12:55:01 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:01 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314084 (min) 0.314012 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318204 (min) 0.361672 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:01 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:01 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:01 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:01 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:01 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.364363888188161e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313859 (min) 0.314041 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315163 (min) 0.33775 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382198884e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313817 (min) 0.313966 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315188 (min) 0.337823 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129203598e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314098 (min) 0.313882 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313753 (min) 0.314098 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:01 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:01 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:01 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:01 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:01 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:01 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:01 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:01 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:01 DEBUG   opendrift.models.basemodel:2057:               -2.537469128520046e-20 <- latitude  -> 8.991385078230309e-06
12:55:01 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7945258745850963e-05
12:55:01 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:01 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.368710141182784e-12 degrees.
12:55:01 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:01 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:01 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313922 (min) 0.313987 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31399 (min) 0.314134 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:01 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:01 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:01 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:01 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:01 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:01 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166733e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314089 (min) 0.314061 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315177 (min) 0.338614 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.373056394177402e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314086 (min) 0.31404 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315129 (min) 0.338676 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680136e-12 degrees.
12:55:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314105 (min) 0.314023 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318283 (min) 0.362419 (max)
12:55:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:02 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:02 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:02 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:04.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:02 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:02 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:02 DEBUG   opendrift.models.basemodel:2057:               -3.0646991165209856e-20 <- latitude  -> 8.99177347286046e-06
12:55:02 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7932978614574173e-05
12:55:02 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:02 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653315e-12 degrees.
12:55:02 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:02 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:02 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313962 (min) 0.313974 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317097 (min) 0.362087 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:02 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:02 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:02 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4056532916372e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314137 (min) 0.31408 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322866 (min) 0.384481 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653283e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314136 (min) 0.314044 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322832 (min) 0.384538 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647922e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313979 (min) 0.314148 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32808 (min) 0.405274 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:02 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:02 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:02 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:04 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:02 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:02 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:02 DEBUG   opendrift.models.basemodel:2057:               -3.4887798222204826e-20 <- latitude  -> 8.991977787745339e-06
12:55:02 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.79451732206488e-05
12:55:02 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:02 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123178e-12 degrees.
12:55:02 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:02 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:02 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313946 (min) 0.314142 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328643 (min) 0.404618 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:02 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:02 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:02 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113056e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314108 (min) 0.313823 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334669 (min) 0.423133 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123776e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314099 (min) 0.313978 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33465 (min) 0.422917 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050620446e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314022 (min) 0.31408 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340541 (min) 0.438533 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:02 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:02 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:02 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:03.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:02 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:02 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:02 DEBUG   opendrift.models.basemodel:2057:               -3.656878068420502e-20 <- latitude  -> 8.991858727369748e-06
12:55:02 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.795563105913098e-05
12:55:02 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:02 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086276e-12 degrees.
12:55:02 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:02 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:02 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314101 (min) 0.314136 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340902 (min) 0.438695 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:02 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:02 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:02 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075574e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31397 (min) 0.314072 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346243 (min) 0.452651 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588972e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314003 (min) 0.314118 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346181 (min) 0.452575 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086297e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313621 (min) 0.314087 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350408 (min) 0.461896 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:02 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:02 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:02 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:03 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:02 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:02 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:02 DEBUG   opendrift.models.basemodel:2057:               -3.4488519881111933e-20 <- latitude  -> 8.991307631920001e-06
12:55:02 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7964231213098393e-05
12:55:02 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:02 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578273e-12 degrees.
12:55:02 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:02 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:02 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314033 (min) 0.313672 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350135 (min) 0.461093 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:02 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:02 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:02 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086337e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313981 (min) 0.3141 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353082 (min) 0.468007 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091707e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314021 (min) 0.314102 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353049 (min) 0.467309 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599748e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314014 (min) 0.314092 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35399 (min) 0.469226 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:02 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:02 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:02 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:02.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:02 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:02 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:02 DEBUG   opendrift.models.basemodel:2057:               -2.817927692077097e-20 <- latitude  -> 8.992116598366299e-06
12:55:02 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7970756766553057e-05
12:55:02 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:02 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583602e-12 degrees.
12:55:02 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:02 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:02 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313933 (min) 0.31413 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353904 (min) 0.470126 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:02 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:02 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:02 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070223e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314145 (min) 0.314139 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35281 (min) 0.467343 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583624e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314126 (min) 0.314123 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352663 (min) 0.467494 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086303e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314023 (min) 0.314126 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350263 (min) 0.46178 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:02 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:02 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:02 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:02 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:02 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:02 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:02 DEBUG   opendrift.models.basemodel:2057:               -1.7907344083831073e-20 <- latitude  -> 8.992599035946435e-06
12:55:02 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7975753939584947e-05
12:55:02 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:02 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070207e-12 degrees.
12:55:02 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:02 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:02 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31409 (min) 0.314007 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350362 (min) 0.462601 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:02 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:02 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:02 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059482e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313841 (min) 0.313819 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34625 (min) 0.453375 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45780832757291e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313783 (min) 0.313795 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346242 (min) 0.45333 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070198e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314102 (min) 0.314074 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340392 (min) 0.440498 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:02 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:02 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:02 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:01.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:02 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:02 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:02 DEBUG   opendrift.models.basemodel:2057:               -5.2920628211808486e-21 <- latitude  -> 8.992866906528886e-06
12:55:02 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798010888934399e-05
12:55:02 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:02 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059495e-12 degrees.
12:55:02 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:02 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:02 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314106 (min) 0.313969 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340611 (min) 0.440579 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:02 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:02 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:02 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535344e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314155 (min) 0.31413 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334645 (min) 0.422137 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47736646604874e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314103 (min) 0.314125 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33461 (min) 0.421641 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043379e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314013 (min) 0.314152 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328128 (min) 0.403428 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:02 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:02 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:02 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:01 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:02 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:02 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:02 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.993016304552377e-06
12:55:02 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798207470208039e-05
12:55:02 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:02 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027308e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314091 (min) 0.313921 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328562 (min) 0.406151 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:02 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:02 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:02 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.503443984016595e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313924 (min) 0.313969 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322711 (min) 0.384472 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49692460452463e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313886 (min) 0.313993 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322729 (min) 0.38467 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49475147802731e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314108 (min) 0.314044 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318124 (min) 0.361959 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:02 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:02 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:02 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:00.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:02 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:02 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:02 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.993096936674913e-06
12:55:02 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7982048075673977e-05
12:55:02 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:02 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.505617110513916e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314139 (min) 0.314114 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318223 (min) 0.362108 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:02 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:02 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:02 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.505617110513921e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314059 (min) 0.313979 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314756 (min) 0.338574 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.507790237011244e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314075 (min) 0.313964 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314701 (min) 0.338559 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.5034439840166e-12 degrees.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313915 (min) 0.314078 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314071 (min) 0.314123 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:02 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:03 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:03 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:03 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:00.500000
12:55:03 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:03 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:03 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:03 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:03 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:03 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:03 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:03 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:03 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:03 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:03 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:03 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:03 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:03 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:03 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:03 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:03 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:03 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:03 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:03 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:03 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:12.500000 to 2000-01-01 00:00:00.500000)
12:55:03 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:03 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:03 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:03 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:03 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:03 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:03 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:03 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:03 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:03 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:03 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:03 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:03 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:03 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:03 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314085 (min) 0.31407 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353802 (min) 0.466032 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:03 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:03 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:03 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:03 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:03 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:03 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:03 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599698e-12 degrees.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314076 (min) 0.314156 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352791 (min) 0.46472 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711846e-12 degrees.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314046 (min) 0.314139 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352781 (min) 0.464125 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711846e-12 degrees.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314154 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350231 (min) 0.458417 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:03 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:03 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:03 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:03 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:03 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:03 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:03 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:03 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:03 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:03 DEBUG   opendrift.models.basemodel:2057:               -7.010517860970282e-20 <- latitude  -> 8.893770903203733e-06
12:55:03 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7905548485545717e-05
12:55:03 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:03 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4966 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102408e-12 degrees.
12:55:03 DEBUG   opendrift.readers.basereader.variables:829: Masking 34 elements outside coverage
12:55:03 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 34 elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 34 elements
12:55:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 34 elements
12:55:03 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313648 (min) 0.313987 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350189 (min) 0.459917 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:03 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:03 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:03 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:03 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:03 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:03 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:03 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615837e-12 degrees.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314089 (min) 0.314097 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346022 (min) 0.451162 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129243e-12 degrees.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314114 (min) 0.314154 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346014 (min) 0.451154 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626568e-12 degrees.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314063 (min) 0.313852 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340701 (min) 0.438411 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:03 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:03 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:03 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:03 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:03 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:03 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:03 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:03 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:03 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:03 DEBUG   opendrift.models.basemodel:2057:               -6.523045507544231e-20 <- latitude  -> 8.937356689288705e-06
12:55:03 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7948625028840958e-05
12:55:03 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:03 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4962 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39696078564804e-12 degrees.
12:55:03 DEBUG   opendrift.readers.basereader.variables:829: Masking 38 elements outside coverage
12:55:03 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 38 elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 38 elements
12:55:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 38 elements
12:55:03 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314008 (min) 0.314098 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340386 (min) 0.438707 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:03 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:03 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:03 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:03 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:03 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:03 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:03 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690967e-12 degrees.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.313858 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334343 (min) 0.422351 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129204382e-12 degrees.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314153 (min) 0.313832 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334455 (min) 0.422349 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.349152002707065e-12 degrees.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314159 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328345 (min) 0.403777 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:03 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:03 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:03 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:03 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:03 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:03 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:03 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:03 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:03 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:03 DEBUG   opendrift.models.basemodel:2057:               -6.356368075622895e-20 <- latitude  -> 8.960836396908684e-06
12:55:03 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796715516375469e-05
12:55:03 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:03 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4963 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472760719e-12 degrees.
12:55:03 DEBUG   opendrift.readers.basereader.variables:829: Masking 37 elements outside coverage
12:55:03 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 37 elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 37 elements
12:55:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 37 elements
12:55:03 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314118 (min) 0.313821 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328489 (min) 0.405585 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:03 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:03 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:03 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:03 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:03 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:03 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:03 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.251361310327636e-12 degrees.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314133 (min) 0.313992 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322539 (min) 0.384763 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.229630045354609e-12 degrees.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314133 (min) 0.313997 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322614 (min) 0.384735 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.225283792359819e-12 degrees.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313801 (min) 0.313996 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317976 (min) 0.36202 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:03 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:03 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:03 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:03 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:03 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:03 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:03 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:03 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:03 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:03 DEBUG   opendrift.models.basemodel:2057:               -5.868293150517086e-20 <- latitude  -> 8.973562111498466e-06
12:55:03 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7974970070538286e-05
12:55:03 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:03 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4969 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24049567784096e-12 degrees.
12:55:03 DEBUG   opendrift.readers.basereader.variables:829: Masking 31 elements outside coverage
12:55:03 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 31 elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 31 elements
12:55:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 31 elements
12:55:03 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314031 (min) 0.313998 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317939 (min) 0.359396 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:03 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:03 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:03 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:03 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:03 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:03 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:03 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.25353443682491e-12 degrees.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314111 (min) 0.31377 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315013 (min) 0.337653 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.231803171851684e-12 degrees.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314142 (min) 0.313719 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314993 (min) 0.337587 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.236149424846328e-12 degrees.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313391 (min) 0.313989 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314124 (min) 0.314309 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:03 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:03 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:03 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:03 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:03 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:03 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:03 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:03 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:03 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:03 DEBUG   opendrift.models.basemodel:2057:               -5.217509673192948e-20 <- latitude  -> 8.980907371569508e-06
12:55:03 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797789465520984e-05
12:55:03 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:03 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4977 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.2578806898195e-12 degrees.
12:55:03 DEBUG   opendrift.readers.basereader.variables:829: Masking 23 elements outside coverage
12:55:03 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 23 elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 23 elements
12:55:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 23 elements
12:55:03 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313514 (min) 0.312888 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314048 (min) 0.314628 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:03 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:03 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:03 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:03 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:03 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:03 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:03 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798076e-12 degrees.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314136 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315205 (min) 0.338426 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.260053816316832e-12 degrees.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314138 (min) 0.314134 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315181 (min) 0.337817 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.262226942814124e-12 degrees.
12:55:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312709 (min) 0.313037 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318241 (min) 0.361672 (max)
12:55:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:03 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:03 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:03 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:03 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:03 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:03 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:03 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:03 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:03 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:03 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:03 DEBUG   opendrift.models.basemodel:2057:               -4.331616351214048e-20 <- latitude  -> 8.985456613663936e-06
12:55:03 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797835349869297e-05
12:55:03 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:03 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4986 elements
12:55:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.281785081290007e-12 degrees.
12:55:04 DEBUG   opendrift.readers.basereader.variables:829: Masking 14 elements outside coverage
12:55:04 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 14 elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 14 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 14 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314111 (min) 0.312855 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31827 (min) 0.360259 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:04 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:04 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:04 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.296996966771253e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313132 (min) 0.314127 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322967 (min) 0.38361 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787329e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313188 (min) 0.314123 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322882 (min) 0.382673 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787327e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314141 (min) 0.313571 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328481 (min) 0.403505 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:04 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:04 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:04 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:04 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:04 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:04 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:04 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:04 DEBUG   opendrift.models.basemodel:2057:               -3.784965931443298e-20 <- latitude  -> 8.98823055522374e-06
12:55:04 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797741358688179e-05
12:55:04 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:04 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4991 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.303516346263209e-12 degrees.
12:55:04 DEBUG   opendrift.readers.basereader.variables:829: Masking 9 elements outside coverage
12:55:04 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 9 elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 9 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 9 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313775 (min) 0.314005 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328404 (min) 0.406819 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:04 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:04 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:04 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755156e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313919 (min) 0.313944 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334396 (min) 0.410888 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.303516346263196e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313996 (min) 0.313926 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334701 (min) 0.408435 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472760519e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314059 (min) 0.313962 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340797 (min) 0.42198 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:04 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:04 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:04 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:04 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:04 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:04 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:04 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:04 DEBUG   opendrift.models.basemodel:2057:               -2.6941691574504164e-20 <- latitude  -> 8.989335879749552e-06
12:55:04 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7975610438817543e-05
12:55:04 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:04 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4994 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.316555105247104e-12 degrees.
12:55:04 DEBUG   opendrift.readers.basereader.variables:829: Masking 6 elements outside coverage
12:55:04 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 6 elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 6 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 6 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314108 (min) 0.313908 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340793 (min) 0.441167 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:04 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:04 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:04 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.323074484739084e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314029 (min) 0.31385 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346179 (min) 0.448795 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.323074484739086e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313968 (min) 0.313823 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346325 (min) 0.447752 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.323074484739083e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314003 (min) 0.313923 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35015 (min) 0.456594 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:04 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:04 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:04 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:04 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:04 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:04 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:04 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:04 DEBUG   opendrift.models.basemodel:2057:               -2.160031180607595e-20 <- latitude  -> 8.989349960353754e-06
12:55:04 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7973187743788678e-05
12:55:04 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:04 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728347e-12 degrees.
12:55:04 DEBUG   opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
12:55:04 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 5 elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 5 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 5 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313881 (min) 0.314137 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350433 (min) 0.458156 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:04 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:04 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:04 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.336113243723002e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313961 (min) 0.31402 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353004 (min) 0.464722 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.333940117225682e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313908 (min) 0.314003 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352808 (min) 0.464328 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.336113243723002e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313812 (min) 0.31401 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353802 (min) 0.466081 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:04 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:04 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:04 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:04 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:04 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:04 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:04 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:04 DEBUG   opendrift.models.basemodel:2057:               -1.2210443477181573e-20 <- latitude  -> 8.988656234130346e-06
12:55:04 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7970117379162257e-05
12:55:04 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:04 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.338286370220298e-12 degrees.
12:55:04 DEBUG   opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
12:55:04 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 3 elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 3 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 3 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314069 (min) 0.314146 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353604 (min) 0.467653 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:04 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:04 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:04 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209592e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31405 (min) 0.314144 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352536 (min) 0.46691 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.342632623214953e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314045 (min) 0.314147 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352671 (min) 0.466312 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712276e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314021 (min) 0.314062 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350213 (min) 0.460591 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:04 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:04 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:04 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:04 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:04 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:04 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:04 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:04 DEBUG   opendrift.models.basemodel:2057:               -1.8640650423525705e-20 <- latitude  -> 8.987425953005893e-06
12:55:04 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796604418664574e-05
12:55:04 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:04 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4996 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129204253e-12 degrees.
12:55:04 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:55:04 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313657 (min) 0.313611 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.349224 (min) 0.461698 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:04 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:04 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:04 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696183e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314049 (min) 0.313979 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346192 (min) 0.450196 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.35132512920422e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314065 (min) 0.314029 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346197 (min) 0.449897 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.3534982557009e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313982 (min) 0.313856 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340793 (min) 0.437189 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:04 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:04 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:04 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:04 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:04 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:04 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:04 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:04 DEBUG   opendrift.models.basemodel:2057:               -1.3185629118783021e-20 <- latitude  -> 8.989263157873866e-06
12:55:04 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7960155824731903e-05
12:55:04 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:04 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4988 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.364363888187518e-12 degrees.
12:55:04 DEBUG   opendrift.readers.basereader.variables:829: Masking 12 elements outside coverage
12:55:04 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 12 elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 12 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 12 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314132 (min) 0.313638 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340832 (min) 0.439511 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:04 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:04 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:04 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690857e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314131 (min) 0.31411 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334363 (min) 0.42365 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.364363888188133e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314123 (min) 0.314038 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334295 (min) 0.423409 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.360017635193541e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314148 (min) 0.314048 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328441 (min) 0.404886 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:04 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:04 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:04 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:04 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:04 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:04 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:04 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:04 DEBUG   opendrift.models.basemodel:2057:               -1.509245355219594e-20 <- latitude  -> 8.990142239103429e-06
12:55:04 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7950882198639105e-05
12:55:04 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:04 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674748e-12 degrees.
12:55:04 DEBUG   opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
12:55:04 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 98 elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 98 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 98 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313882 (min) 0.314155 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328262 (min) 0.404216 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:04 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:04 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:04 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166731e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313986 (min) 0.314121 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322505 (min) 0.383808 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674772e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313954 (min) 0.314093 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322481 (min) 0.383663 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37088326768013e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314077 (min) 0.314058 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317911 (min) 0.36128 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:04 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:04 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:04 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:04 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:04 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:04 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:04 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:04 DEBUG   opendrift.models.basemodel:2057:               -1.9303268371672905e-20 <- latitude  -> 8.9910976347559e-06
12:55:04 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.793520920286335e-05
12:55:04 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:04 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38609515316134e-12 degrees.
12:55:04 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:04 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313788 (min) 0.314122 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318207 (min) 0.361631 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:04 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:04 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:04 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39478765915064e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313956 (min) 0.314121 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314541 (min) 0.338306 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406156002e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313925 (min) 0.314121 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314689 (min) 0.338251 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406156005e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314009 (min) 0.313547 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314109 (min) 0.314294 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:04 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:04 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:04 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:04 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:04 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:04 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:04 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:04 DEBUG   opendrift.models.basemodel:2057:               -2.4899967855650834e-20 <- latitude  -> 8.99170010069005e-06
12:55:04 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.794103982335137e-05
12:55:04 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:04 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139892e-12 degrees.
12:55:04 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:04 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313921 (min) 0.314077 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314011 (min) 0.31431 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:04 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:04 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:04 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41217267112919e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31402 (min) 0.313839 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315183 (min) 0.338252 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139915e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314031 (min) 0.313908 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315145 (min) 0.338563 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40348016513992e-12 degrees.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313962 (min) 0.314059 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318251 (min) 0.362329 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:04 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:04 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:04 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:04 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:04 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:04 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:04.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:04 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:04 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:04 DEBUG   opendrift.models.basemodel:2057:               -3.029602782285014e-20 <- latitude  -> 8.992068733420954e-06
12:55:04 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7950083047439195e-05
12:55:04 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:04 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123797e-12 degrees.
12:55:04 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:04 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314116 (min) 0.313815 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318182 (min) 0.361481 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:05 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:05 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:05 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605054e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31415 (min) 0.313868 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322594 (min) 0.384579 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118459e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314153 (min) 0.313765 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32282 (min) 0.384086 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118459e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313857 (min) 0.313978 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328601 (min) 0.404729 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:05 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:05 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:05 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:05 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:05 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:05 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:05 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:04 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:05 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:05 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:05 DEBUG   opendrift.models.basemodel:2057:               -3.453654093734516e-20 <- latitude  -> 8.992233136281718e-06
12:55:05 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7958330166046785e-05
12:55:05 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:05 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43173080960508e-12 degrees.
12:55:05 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:05 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:05 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314151 (min) 0.314119 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328383 (min) 0.405592 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:05 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:05 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:05 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:05 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:05 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:05 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:05 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44476956858894e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314087 (min) 0.313834 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334824 (min) 0.424877 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605017e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314098 (min) 0.313952 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334896 (min) 0.424379 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102338e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313947 (min) 0.314137 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340909 (min) 0.440285 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:05 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:05 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:05 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:05 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:05 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:05 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:05 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:03.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:05 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:05 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:05 DEBUG   opendrift.models.basemodel:2057:               -3.630453576065616e-20 <- latitude  -> 8.992141318366336e-06
12:55:05 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7965110435840724e-05
12:55:05 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:05 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075559e-12 degrees.
12:55:05 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:05 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:05 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31397 (min) 0.314002 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340872 (min) 0.439969 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:05 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:05 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:05 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:05 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:05 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:05 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:05 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059493e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313516 (min) 0.314077 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346105 (min) 0.452929 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567534e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313727 (min) 0.314081 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346189 (min) 0.452328 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070211e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313667 (min) 0.314077 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35026 (min) 0.461627 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:05 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:05 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:05 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:05 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:05 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:05 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:05 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:03 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:05 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:05 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:05 DEBUG   opendrift.models.basemodel:2057:               -3.4286672774307964e-20 <- latitude  -> 8.99195902440862e-06
12:55:05 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7971089021272905e-05
12:55:05 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:05 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064873e-12 degrees.
12:55:05 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:05 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:05 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313986 (min) 0.313991 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350276 (min) 0.462675 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:05 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:05 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:05 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:05 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:05 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:05 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:05 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572932e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314155 (min) 0.314075 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353023 (min) 0.468695 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583658e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314154 (min) 0.314098 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353089 (min) 0.468737 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583658e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314149 (min) 0.314111 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353939 (min) 0.470636 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:05 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:05 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:05 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:05 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:05 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:05 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:05 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:02.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:05 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:05 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:05 DEBUG   opendrift.models.basemodel:2057:               -2.802842312631323e-20 <- latitude  -> 8.991616960630905e-06
12:55:05 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797534100439306e-05
12:55:05 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:05 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091675e-12 degrees.
12:55:05 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:05 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:05 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314089 (min) 0.313996 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353947 (min) 0.46981 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:05 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:05 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:05 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:05 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:05 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:05 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:05 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44476956858902e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313943 (min) 0.313909 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35298 (min) 0.468635 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605104e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313969 (min) 0.314016 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35304 (min) 0.468725 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107786e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314014 (min) 0.313902 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35041 (min) 0.462974 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:05 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:05 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:05 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:05 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:05 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:05 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:05 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:02 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:05 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:05 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:05 DEBUG   opendrift.models.basemodel:2057:               -1.7801644476616094e-20 <- latitude  -> 8.991320277800306e-06
12:55:05 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797845186907244e-05
12:55:05 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:05 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42521143011312e-12 degrees.
12:55:05 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:05 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:05 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31392 (min) 0.314143 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35043 (min) 0.462536 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:05 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:05 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:05 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:05 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:05 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:05 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:05 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086245e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314086 (min) 0.313633 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346195 (min) 0.452843 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610355e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314056 (min) 0.31383 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34616 (min) 0.453092 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43607706259964e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.313853 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340742 (min) 0.440284 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:05 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:05 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:05 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:05 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:05 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:05 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:05 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:01.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:05 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:05 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:05 DEBUG   opendrift.models.basemodel:2057:               -5.241272250779366e-21 <- latitude  -> 8.990422972640303e-06
12:55:05 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.79813896793474e-05
12:55:05 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:05 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059454e-12 degrees.
12:55:05 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:05 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:05 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313858 (min) 0.313813 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340666 (min) 0.440454 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:05 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:05 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:05 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:05 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:05 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:05 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:05 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.48605897203802e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313559 (min) 0.313959 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334634 (min) 0.424838 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551417e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313737 (min) 0.31399 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334591 (min) 0.424789 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.48171271904338e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31394 (min) 0.313966 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328451 (min) 0.406079 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:05 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:05 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:05 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:05 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:05 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:05 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:05 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:01 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:05 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:05 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:05 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.989973242050315e-06
12:55:05 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7983162458319787e-05
12:55:05 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:05 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529985e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314048 (min) 0.313945 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328599 (min) 0.405987 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:05 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:05 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:05 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:05 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:05 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:05 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:05 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.503443984016592e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314005 (min) 0.31407 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322822 (min) 0.384731 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.499097731021949e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313926 (min) 0.314029 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322818 (min) 0.384654 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519269e-12 degrees.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314058 (min) 0.31408 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317979 (min) 0.362093 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:05 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:05 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:05 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:05 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:05 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:05 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:05 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:05 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:05 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:05 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:05 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:01
12:55:05 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:05 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:05 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:05 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:05 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:05 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:06 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:06 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:06 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:06 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:06 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:06 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:06 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:06 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:06 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:06 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:06 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:06 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:06 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:06 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:06 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:06 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:13 to 2000-01-01 00:00:01)
12:55:06 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:06 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:06 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:06 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:06 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:06 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:06 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:06 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:06 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:06 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:06 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:06 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:06 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:06 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:06 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314159 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350539 (min) 0.458791 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:06 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:06 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:06 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:06 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:06 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:06 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:06 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4360770625997e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314074 (min) 0.314154 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352941 (min) 0.464819 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711846e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314054 (min) 0.314136 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352861 (min) 0.464327 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41869205062114e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314112 (min) 0.314112 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353655 (min) 0.466034 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:06 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:06 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:06 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:06 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:06 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:06 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:06 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:06 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:06 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:06 DEBUG   opendrift.models.basemodel:2057:               -7.024384439848083e-20 <- latitude  -> 8.893837408030417e-06
12:55:06 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.790566266762118e-05
12:55:06 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:06 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4966 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107768e-12 degrees.
12:55:06 DEBUG   opendrift.readers.basereader.variables:829: Masking 34 elements outside coverage
12:55:06 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 34 elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 34 elements
12:55:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 34 elements
12:55:06 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313752 (min) 0.313781 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353841 (min) 0.467622 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:06 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:06 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:06 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:06 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:06 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:06 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:06 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615837e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31414 (min) 0.314044 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352981 (min) 0.466299 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129247e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314078 (min) 0.313909 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353043 (min) 0.466452 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631927e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314157 (min) 0.314081 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350254 (min) 0.460685 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:06 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:06 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:06 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:06 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:06 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:06 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:06 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:06 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:06 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:06 DEBUG   opendrift.models.basemodel:2057:               -6.583541405930419e-20 <- latitude  -> 8.938118285783227e-06
12:55:06 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7949778123067655e-05
12:55:06 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:06 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4960 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653404e-12 degrees.
12:55:06 DEBUG   opendrift.readers.basereader.variables:829: Masking 40 elements outside coverage
12:55:06 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 40 elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 40 elements
12:55:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 40 elements
12:55:06 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313824 (min) 0.313859 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350232 (min) 0.461064 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:06 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:06 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:06 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:06 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:06 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:06 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:06 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690975e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314055 (min) 0.31392 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346151 (min) 0.451824 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.34263262321511e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31401 (min) 0.313963 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346151 (min) 0.452303 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717792e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314153 (min) 0.313873 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340772 (min) 0.439461 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:06 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:06 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:06 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:06 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:06 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:06 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:06 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:06 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:06 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:06 DEBUG   opendrift.models.basemodel:2057:               -6.576895793588315e-20 <- latitude  -> 8.962271624296336e-06
12:55:06 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7968606134904846e-05
12:55:06 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:06 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4958 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.294823840274137e-12 degrees.
12:55:06 DEBUG   opendrift.readers.basereader.variables:829: Masking 42 elements outside coverage
12:55:06 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 42 elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 42 elements
12:55:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 42 elements
12:55:06 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31411 (min) 0.313957 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340464 (min) 0.439562 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:06 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:06 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:06 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:06 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:06 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:06 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:06 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.251361310327594e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314157 (min) 0.313535 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334619 (min) 0.422866 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.21876441286784e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314156 (min) 0.313601 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334617 (min) 0.422714 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.223110665862469e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314013 (min) 0.314023 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328391 (min) 0.404143 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:06 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:06 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:06 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:06 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:06 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:06 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:06 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:06 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:06 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:06 DEBUG   opendrift.models.basemodel:2057:               -6.338426050038355e-20 <- latitude  -> 8.974972238499134e-06
12:55:06 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976177254946678e-05
12:55:06 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:06 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4963 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057332936e-12 degrees.
12:55:06 DEBUG   opendrift.readers.basereader.variables:829: Masking 37 elements outside coverage
12:55:06 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 37 elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 37 elements
12:55:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 37 elements
12:55:06 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313721 (min) 0.313398 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32831 (min) 0.405858 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:06 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:06 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:06 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:06 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:06 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:06 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:06 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.268746322306123e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314146 (min) 0.313659 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322786 (min) 0.383095 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.242668804338286e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314132 (min) 0.31365 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322789 (min) 0.382872 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24266880433829e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314155 (min) 0.313855 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318008 (min) 0.360609 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:06 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:06 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:06 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:06 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:06 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:06 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:06 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:06 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:06 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:06 DEBUG   opendrift.models.basemodel:2057:               -5.855634920398437e-20 <- latitude  -> 8.982316269924437e-06
12:55:06 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7978537354231078e-05
12:55:06 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:06 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4973 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798082e-12 degrees.
12:55:06 DEBUG   opendrift.readers.basereader.variables:829: Masking 27 elements outside coverage
12:55:06 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 27 elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 27 elements
12:55:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 27 elements
12:55:06 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313885 (min) 0.314066 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318088 (min) 0.360337 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:06 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:06 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:06 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:06 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:06 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:06 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:06 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29917009326859e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313283 (min) 0.314052 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3151 (min) 0.337989 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.277438828295357e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313389 (min) 0.314036 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315152 (min) 0.338007 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.281785081289996e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314075 (min) 0.314015 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31394 (min) 0.31441 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:06 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:06 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:06 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:06 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:06 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:06 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:06 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:06 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:06 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:06 DEBUG   opendrift.models.basemodel:2057:               -5.3137693784813845e-20 <- latitude  -> 8.985715973854863e-06
12:55:06 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7978091714200778e-05
12:55:06 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:06 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4982 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.30351634626324e-12 degrees.
12:55:06 DEBUG   opendrift.readers.basereader.variables:829: Masking 18 elements outside coverage
12:55:06 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 18 elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 18 elements
12:55:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 18 elements
12:55:06 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314065 (min) 0.313844 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314148 (min) 0.313706 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:06 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:06 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:06 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:06 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:06 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:06 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:06 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.323074484739084e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31388 (min) 0.313819 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314965 (min) 0.337817 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.307862599257838e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314038 (min) 0.313795 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314967 (min) 0.337087 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252481e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314145 (min) 0.313999 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318284 (min) 0.360898 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:06 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:06 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:06 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:06 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:06 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:06 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:06 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:06 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:06 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:06 DEBUG   opendrift.models.basemodel:2057:               -4.4022586112448766e-20 <- latitude  -> 8.988765957607126e-06
12:55:06 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7975809597172383e-05
12:55:06 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:06 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4989 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.327420737733717e-12 degrees.
12:55:06 DEBUG   opendrift.readers.basereader.variables:829: Masking 11 elements outside coverage
12:55:06 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 11 elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 11 elements
12:55:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 11 elements
12:55:06 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313173 (min) 0.313821 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31831 (min) 0.361926 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:06 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:06 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:06 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:06 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:06 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:06 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:06 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.342632623214943e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313736 (min) 0.313726 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323004 (min) 0.385243 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.33176699072834e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313669 (min) 0.313724 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322961 (min) 0.385725 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.33394011722566e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313882 (min) 0.313809 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328477 (min) 0.40669 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:06 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:06 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:06 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:06 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:06 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:06 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:06 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:06 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:06 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:06 DEBUG   opendrift.models.basemodel:2057:               -3.705021125372602e-20 <- latitude  -> 8.990464724768093e-06
12:55:06 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7972218244669027e-05
12:55:06 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:06 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4993 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749711641e-12 degrees.
12:55:06 DEBUG   opendrift.readers.basereader.variables:829: Masking 7 elements outside coverage
12:55:06 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 7 elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 7 elements
12:55:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 7 elements
12:55:06 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313893 (min) 0.31414 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328616 (min) 0.392064 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:06 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:06 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:06 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:06 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:06 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:06 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:06 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382198864e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314043 (min) 0.313996 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334957 (min) 0.423236 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209581e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313972 (min) 0.314047 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334915 (min) 0.42413 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129204224e-12 degrees.
12:55:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314036 (min) 0.314095 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340734 (min) 0.439962 (max)
12:55:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:06 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:06 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:06 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:06 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:06 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:06 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:06 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:06 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:06 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:06 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:06 DEBUG   opendrift.models.basemodel:2057:               -2.609513242840576e-20 <- latitude  -> 8.991247137383084e-06
12:55:06 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7967661305427112e-05
12:55:06 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:06 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4996 elements
12:55:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696199e-12 degrees.
12:55:06 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:55:06 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:55:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314145 (min) 0.313984 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34078 (min) 0.435351 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.368710141182776e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314151 (min) 0.314062 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346145 (min) 0.448672 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.360017635193488e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314155 (min) 0.313988 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346255 (min) 0.447693 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696216e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31415 (min) 0.314113 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35037 (min) 0.456541 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:07 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:07 DEBUG   opendrift.models.basemodel:2057:               -2.0724028995842454e-20 <- latitude  -> 8.991432166785997e-06
12:55:07 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796226321719206e-05
12:55:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.368710141182789e-12 degrees.
12:55:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
12:55:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 3 elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 3 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 3 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313453 (min) 0.313967 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350382 (min) 0.458818 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674759e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313807 (min) 0.314044 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353003 (min) 0.465781 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37088326768012e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313802 (min) 0.314023 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353067 (min) 0.464859 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.373056394177441e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313818 (min) 0.314059 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353974 (min) 0.466635 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:07 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:07 DEBUG   opendrift.models.basemodel:2057:               -1.890065795248134e-20 <- latitude  -> 8.991238164223609e-06
12:55:07 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7955785153340655e-05
12:55:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674774e-12 degrees.
12:55:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
12:55:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 3 elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 3 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 3 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313955 (min) 0.314105 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353794 (min) 0.467659 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664017e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314025 (min) 0.314033 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352788 (min) 0.466395 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37957577366938e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314033 (min) 0.314034 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35288 (min) 0.465615 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166697e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313985 (min) 0.313989 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350373 (min) 0.459914 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:07 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:07 DEBUG   opendrift.models.basemodel:2057:               -1.2883374731807192e-20 <- latitude  -> 8.990778713427976e-06
12:55:07 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.794743348967578e-05
12:55:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39044140615599e-12 degrees.
12:55:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
12:55:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 3 elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 3 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 3 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313983 (min) 0.313827 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350277 (min) 0.462047 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406156e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314077 (min) 0.31415 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34568 (min) 0.452627 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.386095153161364e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314101 (min) 0.314142 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345662 (min) 0.452275 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38826827965868e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314155 (min) 0.313786 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340776 (min) 0.439476 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:07 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:07 DEBUG   opendrift.models.basemodel:2057:               -1.1723564973338985e-20 <- latitude  -> 8.990057936717922e-06
12:55:07 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7936663647282537e-05
12:55:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4991 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39261453265334e-12 degrees.
12:55:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 9 elements outside coverage
12:55:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 9 elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 9 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 9 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313841 (min) 0.314078 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340628 (min) 0.440221 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139897e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31401 (min) 0.314141 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334408 (min) 0.423703 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647936e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314008 (min) 0.314112 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334355 (min) 0.423885 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145256e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314091 (min) 0.314128 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328497 (min) 0.40525 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:07 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:07 DEBUG   opendrift.models.basemodel:2057:               -1.4129675748530762e-20 <- latitude  -> 8.990658122574314e-06
12:55:07 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7942535847423174e-05
12:55:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40565329163658e-12 degrees.
12:55:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314013 (min) 0.314114 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328555 (min) 0.405364 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134567e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314006 (min) 0.314058 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322773 (min) 0.384915 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40348016513993e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314008 (min) 0.313933 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322791 (min) 0.384881 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40130703864261e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313811 (min) 0.31407 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318169 (min) 0.362203 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:07 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:07 DEBUG   opendrift.models.basemodel:2057:               -1.8744638333965565e-20 <- latitude  -> 8.991576200729859e-06
12:55:07 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7948815005787384e-05
12:55:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123804e-12 degrees.
12:55:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314104 (min) 0.314082 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318206 (min) 0.360955 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556609769e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314145 (min) 0.313809 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314914 (min) 0.337113 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711846e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314139 (min) 0.313702 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314841 (min) 0.337261 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621143e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314102 (min) 0.314125 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313988 (min) 0.313858 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:07 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:07 DEBUG   opendrift.models.basemodel:2057:               -2.4471746936791277e-20 <- latitude  -> 8.992161575245006e-06
12:55:07 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7955245002789625e-05
12:55:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4230383036158e-12 degrees.
12:55:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314006 (min) 0.314037 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313495 (min) 0.31383 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605028e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313824 (min) 0.31385 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31523 (min) 0.338705 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118504e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313881 (min) 0.313995 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315219 (min) 0.338507 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42521143011307e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313894 (min) 0.314014 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31815 (min) 0.362251 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:07 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:04.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:07 DEBUG   opendrift.models.basemodel:2057:               -3.000536938686068e-20 <- latitude  -> 8.992543176108536e-06
12:55:07 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7961457520604115e-05
12:55:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599682e-12 degrees.
12:55:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314081 (min) 0.313836 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318169 (min) 0.361806 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4469426950863e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314107 (min) 0.314026 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322912 (min) 0.385416 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588982e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314113 (min) 0.314014 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322939 (min) 0.385092 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097024e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31409 (min) 0.31385 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328592 (min) 0.406001 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:07 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:04 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:07 DEBUG   opendrift.models.basemodel:2057:               -3.4472459416757333e-20 <- latitude  -> 8.992788159797121e-06
12:55:07 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796715989394273e-05
12:55:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589004e-12 degrees.
12:55:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314003 (min) 0.313597 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328651 (min) 0.404773 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594386e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313841 (min) 0.314122 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33488 (min) 0.424536 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107793e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313856 (min) 0.314073 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334753 (min) 0.424679 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605004e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313965 (min) 0.314092 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340957 (min) 0.440553 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:07 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:03.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:07 DEBUG   opendrift.models.basemodel:2057:               -3.614812399040709e-20 <- latitude  -> 8.992934028762347e-06
12:55:07 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.79721669340564e-05
12:55:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070177e-12 degrees.
12:55:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313921 (min) 0.314037 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340762 (min) 0.440646 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048751e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314139 (min) 0.314041 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34605 (min) 0.453041 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054108e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314149 (min) 0.314007 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346014 (min) 0.453676 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47084708655679e-12 degrees.
12:55:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31396 (min) 0.314015 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350282 (min) 0.463055 (max)
12:55:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:07 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:03 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:07 DEBUG   opendrift.models.basemodel:2057:               -3.4167387018902794e-20 <- latitude  -> 8.992999722882199e-06
12:55:07 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976208366976697e-05
12:55:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546077e-12 degrees.
12:55:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:08 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314073 (min) 0.314147 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35034 (min) 0.462106 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:08 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:08 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:08 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:08 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:08 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:08 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:08 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535373e-12 degrees.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314048 (min) 0.31407 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35285 (min) 0.468502 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47953959254609e-12 degrees.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314061 (min) 0.314009 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352956 (min) 0.469037 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540734e-12 degrees.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31402 (min) 0.313934 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353898 (min) 0.470949 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:08 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:08 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:08 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:08 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:08 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:08 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:08 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:02.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:08 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:08 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:08 DEBUG   opendrift.models.basemodel:2057:               -2.7939375118975315e-20 <- latitude  -> 8.992983940059061e-06
12:55:08 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797864509938282e-05
12:55:08 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:08 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043426e-12 degrees.
12:55:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:08 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313612 (min) 0.314115 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353985 (min) 0.469763 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:08 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:08 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:08 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:08 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:08 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:08 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:08 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47302021305351e-12 degrees.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314112 (min) 0.314022 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352879 (min) 0.468166 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556848e-12 degrees.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314149 (min) 0.314029 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352984 (min) 0.468233 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059534e-12 degrees.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314098 (min) 0.313875 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35042 (min) 0.462496 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:08 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:08 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:08 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:08 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:08 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:08 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:08 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:02 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:08 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:08 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:08 DEBUG   opendrift.models.basemodel:2057:               -1.773929879775188e-20 <- latitude  -> 8.99285688830906e-06
12:55:08 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798099188880662e-05
12:55:08 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:08 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075627e-12 degrees.
12:55:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:08 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314062 (min) 0.314111 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350352 (min) 0.463153 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:08 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:08 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:08 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:08 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:08 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:08 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:08 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080975e-12 degrees.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314119 (min) 0.314123 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346001 (min) 0.453698 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589016e-12 degrees.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31413 (min) 0.314125 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345939 (min) 0.453594 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44476956858902e-12 degrees.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313775 (min) 0.313788 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340692 (min) 0.440751 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:08 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:08 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:08 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:08 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:08 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:08 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:08 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:01.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:08 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:08 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:08 DEBUG   opendrift.models.basemodel:2057:               -5.200821847537034e-21 <- latitude  -> 8.992556441341166e-06
12:55:08 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798117985558651e-05
12:55:08 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:08 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102445e-12 degrees.
12:55:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:08 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313812 (min) 0.314107 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34088 (min) 0.438999 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:08 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:08 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:08 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:08 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:08 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:08 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:08 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588929e-12 degrees.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314132 (min) 0.314118 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334711 (min) 0.424423 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107683e-12 degrees.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314103 (min) 0.314127 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33467 (min) 0.424477 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599645e-12 degrees.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314119 (min) 0.31388 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328023 (min) 0.405836 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:08 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:08 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:08 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:08 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:08 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:08 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:08 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:08 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:01.500000
12:55:08 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:08 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:08 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:08 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:08 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:08 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:08 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:08 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:08 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:08 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:08 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:08 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:08 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:08 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:08 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:08 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:08 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:08 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:08 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:08 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:08 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:08 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:13.500000 to 2000-01-01 00:00:01.500000)
12:55:08 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:08 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:08 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:08 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:08 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:08 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:08 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:08 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:08 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:08 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:08 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:08 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:08 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:08 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:08 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314152 (min) 0.314122 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34098 (min) 0.437384 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:08 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:08 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:08 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:08 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:08 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:08 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:08 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314113 (min) 0.313976 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3462 (min) 0.450385 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621138e-12 degrees.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314128 (min) 0.313993 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346233 (min) 0.449766 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113102e-12 degrees.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.314156 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350455 (min) 0.458735 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:08 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:08 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:08 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:08 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:08 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:08 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:08 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:08 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:08 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:08 DEBUG   opendrift.models.basemodel:2057:               -6.831427019265751e-20 <- latitude  -> 8.892633178787778e-06
12:55:08 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7903405095231713e-05
12:55:08 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:08 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4967 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605086e-12 degrees.
12:55:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 33 elements outside coverage
12:55:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 33 elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 33 elements
12:55:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 33 elements
12:55:08 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313591 (min) 0.31406 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350364 (min) 0.460026 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:08 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:08 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:08 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:08 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:08 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:08 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:08 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113152e-12 degrees.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31412 (min) 0.314138 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352825 (min) 0.466862 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631919e-12 degrees.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314134 (min) 0.314039 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352993 (min) 0.466229 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631924e-12 degrees.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31409 (min) 0.313988 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353815 (min) 0.468015 (max)
12:55:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:08 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:08 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:08 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:08 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:08 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:08 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:08 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:08 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:08 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:08 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:08 DEBUG   opendrift.models.basemodel:2057:               -6.622929858017362e-20 <- latitude  -> 8.93765246984492e-06
12:55:08 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7948828097746782e-05
12:55:08 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:08 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4959 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785648041e-12 degrees.
12:55:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 41 elements outside coverage
12:55:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 41 elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:08 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 41 elements
12:55:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 41 elements
12:55:08 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:08 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313781 (min) 0.313906 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353567 (min) 0.468633 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:09 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:09 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:09 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:09 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:09 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36219076169097e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314156 (min) 0.314061 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352968 (min) 0.466357 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.34045949671714e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314091 (min) 0.314151 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353036 (min) 0.467291 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717792e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314153 (min) 0.314067 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35036 (min) 0.461511 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:09 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:09 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:09 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:09 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:09 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:09 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:09 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:09 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:09 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:09 DEBUG   opendrift.models.basemodel:2057:               -6.704357885057662e-20 <- latitude  -> 8.96241226061433e-06
12:55:09 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7968669107390342e-05
12:55:09 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:09 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4954 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.292650713776816e-12 degrees.
12:55:09 DEBUG   opendrift.readers.basereader.variables:829: Masking 46 elements outside coverage
12:55:09 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 46 elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 46 elements
12:55:09 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 46 elements
12:55:09 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314038 (min) 0.314096 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350039 (min) 0.461855 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:09 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:09 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:09 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:09 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:09 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.251361310327564e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314143 (min) 0.313955 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345861 (min) 0.451045 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.216591286370489e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314157 (min) 0.31393 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345787 (min) 0.450501 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.218764412867821e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313675 (min) 0.313945 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340599 (min) 0.437761 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:09 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:09 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:09 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:09 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:09 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:09 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:09 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:09 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:09 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:09 DEBUG   opendrift.models.basemodel:2057:               -6.595021646669363e-20 <- latitude  -> 8.97563313547009e-06
12:55:09 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976557713713203e-05
12:55:09 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:09 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4956 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057332957e-12 degrees.
12:55:09 DEBUG   opendrift.readers.basereader.variables:829: Masking 44 elements outside coverage
12:55:09 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 44 elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 44 elements
12:55:09 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 44 elements
12:55:09 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314043 (min) 0.313941 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34018 (min) 0.440196 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:09 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:09 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:09 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:09 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:09 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.277438828295371e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314024 (min) 0.314093 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3345 (min) 0.421824 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24266880433825e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314119 (min) 0.314102 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334496 (min) 0.421298 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.249188183830216e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313943 (min) 0.312726 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32845 (min) 0.403037 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:09 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:09 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:09 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:09 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:09 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:09 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:09 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:09 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:09 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:09 DEBUG   opendrift.models.basemodel:2057:               -6.349420523993958e-20 <- latitude  -> 8.983129320583688e-06
12:55:09 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7978731708157368e-05
12:55:09 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:09 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4966 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787325e-12 degrees.
12:55:09 DEBUG   opendrift.readers.basereader.variables:829: Masking 34 elements outside coverage
12:55:09 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 34 elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 34 elements
12:55:09 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 34 elements
12:55:09 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328272 (min) 0.405936 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:09 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:09 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:09 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:09 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:09 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252475e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314151 (min) 0.31414 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322596 (min) 0.384211 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284629e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314139 (min) 0.314142 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322539 (min) 0.384124 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.288304460781953e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314155 (min) 0.313767 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31812 (min) 0.361555 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:09 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:09 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:09 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:09 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:09 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:09 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:09 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:09 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:09 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:09 DEBUG   opendrift.models.basemodel:2057:               -5.875241056444626e-20 <- latitude  -> 8.98691947743578e-06
12:55:09 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977585019966133e-05
12:55:09 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:09 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4976 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32090135824176e-12 degrees.
12:55:09 DEBUG   opendrift.readers.basereader.variables:829: Masking 24 elements outside coverage
12:55:09 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 24 elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 24 elements
12:55:09 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 24 elements
12:55:09 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313938 (min) 0.313635 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318145 (min) 0.361515 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:09 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:09 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:09 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:09 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:09 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.338286370220322e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314121 (min) 0.313708 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315157 (min) 0.337532 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.320901358241761e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.313682 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315155 (min) 0.337629 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236402e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313109 (min) 0.313663 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314076 (min) 0.313667 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:09 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:09 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:09 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:09 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:09 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:09 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:09 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:09 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:09 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:09 DEBUG   opendrift.models.basemodel:2057:               -5.3144860209419146e-20 <- latitude  -> 8.988269659361473e-06
12:55:09 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7973880694305097e-05
12:55:09 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:09 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4986 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712276e-12 degrees.
12:55:09 DEBUG   opendrift.readers.basereader.variables:829: Masking 14 elements outside coverage
12:55:09 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 14 elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 14 elements
12:55:09 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 14 elements
12:55:09 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313906 (min) 0.313991 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314069 (min) 0.313473 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:09 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:09 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:09 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:09 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:09 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696178e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313551 (min) 0.313873 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315044 (min) 0.338378 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.35132512920422e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313353 (min) 0.313843 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314875 (min) 0.337757 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.34697887620963e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312728 (min) 0.314022 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3182 (min) 0.361609 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:09 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:09 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:09 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:09 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:09 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:09 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:09 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:09 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:09 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:09 DEBUG   opendrift.models.basemodel:2057:               -3.84100369383613e-20 <- latitude  -> 8.990112689963853e-06
12:55:09 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796796882019531e-05
12:55:09 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:09 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4992 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.366537014685442e-12 degrees.
12:55:09 DEBUG   opendrift.readers.basereader.variables:829: Masking 8 elements outside coverage
12:55:09 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 8 elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 8 elements
12:55:09 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 8 elements
12:55:09 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313429 (min) 0.313907 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318219 (min) 0.362662 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:09 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:09 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:09 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:09 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:09 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172058e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313863 (min) 0.313793 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322905 (min) 0.376046 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680094e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313801 (min) 0.313747 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322997 (min) 0.375098 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36871014118278e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313884 (min) 0.313712 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328561 (min) 0.395552 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:09 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:09 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:09 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:09 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:09 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:09 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:09 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:09 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:09 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:09 DEBUG   opendrift.models.basemodel:2057:               -3.7196194361547864e-20 <- latitude  -> 8.991344187494267e-06
12:55:09 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796017973102224e-05
12:55:09 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:09 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166715e-12 degrees.
12:55:09 DEBUG   opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
12:55:09 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 5 elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 5 elements
12:55:09 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 5 elements
12:55:09 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314031 (min) 0.313718 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328523 (min) 0.404084 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:09 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:09 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:09 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:09 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:09 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406155964e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314034 (min) 0.313977 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334922 (min) 0.420997 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37957577366936e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314079 (min) 0.313955 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334781 (min) 0.419963 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166681e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313672 (min) 0.31394 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34065 (min) 0.43576 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:09 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:09 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:09 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:09 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:09 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:09 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:09 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:09 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:09 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:09 DEBUG   opendrift.models.basemodel:2057:               -3.0349814035997126e-20 <- latitude  -> 8.992107059682686e-06
12:55:09 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.795083709203814e-05
12:55:09 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:09 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4996 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406155976e-12 degrees.
12:55:09 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:55:09 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:55:09 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:55:09 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313979 (min) 0.313844 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340803 (min) 0.435488 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:09 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:09 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:09 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:09 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:09 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647948e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313977 (min) 0.313636 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346318 (min) 0.449502 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39478765915063e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31404 (min) 0.313758 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346256 (min) 0.448637 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39696078564795e-12 degrees.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314007 (min) 0.313959 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350229 (min) 0.457559 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:09 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:09 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:09 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:09 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:09 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:09 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:09 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:09 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:09 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:09 DEBUG   opendrift.models.basemodel:2057:               -1.1094987065769298e-20 <- latitude  -> 8.992548910439674e-06
12:55:09 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7940012578158717e-05
12:55:09 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:09 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145284e-12 degrees.
12:55:09 DEBUG   opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
12:55:09 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 3 elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:09 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:09 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:09 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:09 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:09 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:09 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:09 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:09 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 3 elements
12:55:09 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 3 elements
12:55:09 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:09 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:09 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314146 (min) 0.313944 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350454 (min) 0.458845 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:09 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:09 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:09 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:09 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:09 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:10 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:10 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:10 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139881e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314005 (min) 0.313455 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353009 (min) 0.466469 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145233e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314032 (min) 0.313522 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353091 (min) 0.46603 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642555e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314057 (min) 0.31347 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35398 (min) 0.467823 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:10 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:10 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:10 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:10 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:10 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:10 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:10 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:10 DEBUG   opendrift.models.basemodel:2057:               -1.5345446662345985e-20 <- latitude  -> 8.992764639683411e-06
12:55:10 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.794251709978496e-05
12:55:10 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:10 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134522e-12 degrees.
12:55:10 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:55:10 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313884 (min) 0.314078 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353605 (min) 0.469032 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:10 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:10 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:10 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:10 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:10 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129174e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313931 (min) 0.314135 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352817 (min) 0.464834 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631851e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313892 (min) 0.314126 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352704 (min) 0.465245 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631851e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314053 (min) 0.313968 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350247 (min) 0.459549 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:10 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:10 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:10 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:10 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:10 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:10 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:10 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:10 DEBUG   opendrift.models.basemodel:2057:               -1.0266275619936963e-20 <- latitude  -> 8.992797469674309e-06
12:55:10 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7946628085361628e-05
12:55:10 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:10 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123825e-12 degrees.
12:55:10 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:55:10 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314153 (min) 0.314101 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350249 (min) 0.461461 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:10 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:10 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:10 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:10 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:10 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621157e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314048 (min) 0.314159 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345675 (min) 0.452556 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626515e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314028 (min) 0.314106 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345864 (min) 0.452686 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123838e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314137 (min) 0.31408 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340762 (min) 0.439872 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:10 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:10 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:10 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:10 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:10 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:10 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:10 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:10 DEBUG   opendrift.models.basemodel:2057:               -1.0043538106481955e-20 <- latitude  -> 8.992635028619422e-06
12:55:10 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7951062341069496e-05
12:55:10 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:10 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4993 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123852e-12 degrees.
12:55:10 DEBUG   opendrift.readers.basereader.variables:829: Masking 7 elements outside coverage
12:55:10 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 7 elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 7 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 7 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31377 (min) 0.314056 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340654 (min) 0.438924 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:10 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:10 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:10 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:10 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:10 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118433e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31405 (min) 0.313649 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334612 (min) 0.423863 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615755e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314093 (min) 0.313822 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334556 (min) 0.424109 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615755e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314011 (min) 0.313867 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328224 (min) 0.405432 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:10 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:10 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:10 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:10 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:10 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:10 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:10 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:10 DEBUG   opendrift.models.basemodel:2057:               -1.3161413498568767e-20 <- latitude  -> 8.992677106597599e-06
12:55:10 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7955432796558896e-05
12:55:10 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:10 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107723e-12 degrees.
12:55:10 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:10 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314087 (min) 0.313937 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328071 (min) 0.405594 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:10 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:10 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:10 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:10 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:10 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102372e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314023 (min) 0.313869 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322447 (min) 0.384557 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313976 (min) 0.313763 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322343 (min) 0.384558 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313994 (min) 0.314141 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317755 (min) 0.361896 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:10 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:10 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:10 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:10 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:10 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:10 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:10 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:10 DEBUG   opendrift.models.basemodel:2057:               -1.8140764113827577e-20 <- latitude  -> 8.9928082358492e-06
12:55:10 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7959750312746086e-05
12:55:10 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:10 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102385e-12 degrees.
12:55:10 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:10 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314148 (min) 0.314124 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317923 (min) 0.361813 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:10 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:10 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:10 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:10 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:10 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594367e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314152 (min) 0.314085 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314889 (min) 0.338233 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599726e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314148 (min) 0.314136 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314783 (min) 0.338164 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102405e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314152 (min) 0.314148 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313513 (min) 0.314273 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:10 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:10 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:10 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:10 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:10 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:10 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:10 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:10 DEBUG   opendrift.models.basemodel:2057:               -2.4019299513898317e-20 <- latitude  -> 8.992969408104379e-06
12:55:10 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7963943170083488e-05
12:55:10 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:10 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610234e-12 degrees.
12:55:10 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:10 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313818 (min) 0.313975 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313869 (min) 0.314021 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:10 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:10 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:10 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:10 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:10 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086266e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314129 (min) 0.313907 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314957 (min) 0.338391 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594309e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314117 (min) 0.313782 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314802 (min) 0.338324 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44259644209163e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314135 (min) 0.31385 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318129 (min) 0.361896 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:10 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:10 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:10 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:10 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:10 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:10 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:04.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:10 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:10 DEBUG   opendrift.models.basemodel:2057:               -2.983199460998738e-20 <- latitude  -> 8.993069789296638e-06
12:55:10 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7968993738557918e-05
12:55:10 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:10 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572887e-12 degrees.
12:55:10 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:10 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314037 (min) 0.313813 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318035 (min) 0.362004 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:10 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:10 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:10 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:10 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:10 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567534e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31385 (min) 0.314115 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322877 (min) 0.385137 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075577e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31393 (min) 0.314094 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322943 (min) 0.385412 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075582e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314096 (min) 0.314152 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328505 (min) 0.406332 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:10 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:10 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:10 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:10 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:10 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:10 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:04 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:10 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:10 DEBUG   opendrift.models.basemodel:2057:               -3.425218642611853e-20 <- latitude  -> 8.993129921393753e-06
12:55:10 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7973369511823428e-05
12:55:10 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:10 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567555e-12 degrees.
12:55:10 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:10 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313745 (min) 0.314154 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328573 (min) 0.404733 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:10 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:10 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:10 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:10 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:10 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075614e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314112 (min) 0.31403 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334831 (min) 0.424041 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086339e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314124 (min) 0.314002 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334708 (min) 0.42463 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086342e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31389 (min) 0.313675 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340956 (min) 0.440553 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:10 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:10 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:10 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:10 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:10 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:10 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:03.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:10 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:10 DEBUG   opendrift.models.basemodel:2057:               -3.6125340384151213e-20 <- latitude  -> 8.993162993245816e-06
12:55:10 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976123816455165e-05
12:55:10 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:10 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599115e-12 degrees.
12:55:10 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:10 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314042 (min) 0.314055 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340784 (min) 0.440442 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:10 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:10 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:10 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:10 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:10 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599668e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313952 (min) 0.314139 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346229 (min) 0.453581 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615745e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313931 (min) 0.314106 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346259 (min) 0.45325 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107707e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313828 (min) 0.314158 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350269 (min) 0.4626 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:10 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:10 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:10 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:10 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:10 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:10 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:03 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:10 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:10 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:10 DEBUG   opendrift.models.basemodel:2057:               -3.4168672780235727e-20 <- latitude  -> 8.993178509154293e-06
12:55:10 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7979211138088182e-05
12:55:10 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:10 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086284e-12 degrees.
12:55:10 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:10 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:10 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314075 (min) 0.313826 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35031 (min) 0.461135 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:10 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:10 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:10 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:10 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:10 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:10 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46650083356216e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314134 (min) 0.314041 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352865 (min) 0.468885 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572877e-12 degrees.
12:55:10 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:10 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:10 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314117 (min) 0.314091 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35289 (min) 0.468437 (max)
12:55:10 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:10 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:10 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:10 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:10 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:10 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45780832757288e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314129 (min) 0.314088 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353869 (min) 0.470348 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:11 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:11 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:11 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:11 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:11 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:11 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:11 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:02.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:11 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:11 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:11 DEBUG   opendrift.models.basemodel:2057:               -2.784595464070134e-20 <- latitude  -> 8.993183292368742e-06
12:55:11 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7980769613432015e-05
12:55:11 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:11 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048751e-12 degrees.
12:55:11 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:11 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:11 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:11 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314143 (min) 0.314107 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353911 (min) 0.468582 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:11 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:11 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:11 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:11 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:11 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:11 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:11 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038038e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314034 (min) 0.314047 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353043 (min) 0.468675 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043405e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314037 (min) 0.314039 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353085 (min) 0.468648 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043405e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313989 (min) 0.314064 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350417 (min) 0.462899 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:11 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:11 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:11 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:11 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:11 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:11 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:11 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:02 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:11 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:11 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:11 DEBUG   opendrift.models.basemodel:2057:               -1.767392207761712e-20 <- latitude  -> 8.993181592194625e-06
12:55:11 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7982848869271968e-05
12:55:11 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:11 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032667e-12 degrees.
12:55:11 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:11 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:11 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:11 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313965 (min) 0.314075 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350387 (min) 0.462199 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:11 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:11 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:11 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:11 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:11 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:11 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:11 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519272e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314055 (min) 0.314101 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346171 (min) 0.453217 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49475147802731e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314015 (min) 0.31411 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346213 (min) 0.453 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49475147802731e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313687 (min) 0.313888 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340877 (min) 0.440156 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:11 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:11 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:11 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:11 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:11 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:11 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:11 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:11 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:02
12:55:11 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:11 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:11 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:11 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:11 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:11 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:11 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:11 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:11 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:11 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:11 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:11 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:11 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:11 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:11 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:11 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:11 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:11 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:11 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:11 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:11 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:11 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:14 to 2000-01-01 00:00:02)
12:55:11 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:11 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:11 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:11 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:11 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:11 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:11 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:11 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:11 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:11 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:11 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:11 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:11 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:11 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:11 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314094 (min) 0.314114 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328654 (min) 0.40386 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:11 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:11 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:11 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:11 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:11 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:11 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:11 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605054e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.314082 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334975 (min) 0.422438 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621136e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314155 (min) 0.313946 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334992 (min) 0.421896 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615131e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314139 (min) 0.314146 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340956 (min) 0.437266 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:11 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:11 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:11 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:11 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:11 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:11 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:11 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:11 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:11 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:11 DEBUG   opendrift.models.basemodel:2057:               -6.455484346831543e-20 <- latitude  -> 8.890517161296324e-06
12:55:11 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.789887575298926e-05
12:55:11 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:11 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4969 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599724e-12 degrees.
12:55:11 DEBUG   opendrift.readers.basereader.variables:829: Masking 31 elements outside coverage
12:55:11 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 31 elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 31 elements
12:55:11 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 31 elements
12:55:11 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31407 (min) 0.313906 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341055 (min) 0.438578 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:11 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:11 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:11 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:11 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:11 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:11 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:11 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610467e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314146 (min) 0.313643 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346307 (min) 0.451892 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797625906e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314139 (min) 0.313874 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346097 (min) 0.451843 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129237e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314026 (min) 0.314124 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350346 (min) 0.460972 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:11 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:11 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:11 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:11 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:11 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:11 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:11 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:11 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:11 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:11 DEBUG   opendrift.models.basemodel:2057:               -6.599883823453895e-20 <- latitude  -> 8.935679497529558e-06
12:55:11 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.794572786364828e-05
12:55:11 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:11 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4959 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40348016513999e-12 degrees.
12:55:11 DEBUG   opendrift.readers.basereader.variables:829: Masking 41 elements outside coverage
12:55:11 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 41 elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 41 elements
12:55:11 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 41 elements
12:55:11 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313741 (min) 0.314159 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350453 (min) 0.462065 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:11 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:11 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:11 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:11 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:11 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:11 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:11 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674234e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31411 (min) 0.313896 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352951 (min) 0.467959 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701695e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314093 (min) 0.313836 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352715 (min) 0.467288 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701702e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314137 (min) 0.313799 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353663 (min) 0.469103 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:11 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:11 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:11 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:11 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:11 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:11 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:11 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:11 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:11 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:11 DEBUG   opendrift.models.basemodel:2057:               -6.594867931211764e-20 <- latitude  -> 8.961215201106219e-06
12:55:11 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7967350730258976e-05
12:55:11 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:11 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4951 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472760719e-12 degrees.
12:55:11 DEBUG   opendrift.readers.basereader.variables:829: Masking 49 elements outside coverage
12:55:11 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 49 elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 49 elements
12:55:11 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 49 elements
12:55:11 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313889 (min) 0.314142 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353929 (min) 0.47049 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:11 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:11 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:11 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:11 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:11 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:11 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:11 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.244841930835662e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314114 (min) 0.313423 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352251 (min) 0.468191 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.205725653884108e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314139 (min) 0.313561 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35252 (min) 0.467715 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:11 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:11 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:11 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:11 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.20789878038126e-12 degrees.
12:55:11 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:11 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:11 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314121 (min) 0.313393 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350144 (min) 0.461911 (max)
12:55:11 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:11 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:11 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:11 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:11 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:11 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:11 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:11 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:11 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:11 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:11 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:11 DEBUG   opendrift.models.basemodel:2057:               -6.553510357674286e-20 <- latitude  -> 8.975359065219279e-06
12:55:11 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976228515256815e-05
12:55:11 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:11 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4947 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.2448419308356e-12 degrees.
12:55:12 DEBUG   opendrift.readers.basereader.variables:829: Masking 53 elements outside coverage
12:55:12 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 53 elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 53 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 53 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314133 (min) 0.313508 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350235 (min) 0.463065 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:12 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:12 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:12 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:12 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:12 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.273092575300727e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313981 (min) 0.312351 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346076 (min) 0.449997 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.233976298348965e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314002 (min) 0.312374 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346128 (min) 0.449174 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.238322551343643e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314045 (min) 0.313759 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340681 (min) 0.43661 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:12 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:12 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:12 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:12 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:12 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:12 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:12 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:12 DEBUG   opendrift.models.basemodel:2057:               -6.393797807931531e-20 <- latitude  -> 8.983185339807527e-06
12:55:12 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7978719961732826e-05
12:55:12 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:12 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4953 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787329e-12 degrees.
12:55:12 DEBUG   opendrift.readers.basereader.variables:829: Masking 47 elements outside coverage
12:55:12 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 47 elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 47 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 47 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313537 (min) 0.31405 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.338053 (min) 0.44077 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:12 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:12 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:12 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:12 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:12 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.3143819787498e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314028 (min) 0.3136 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334682 (min) 0.42365 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787316e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314099 (min) 0.313511 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334697 (min) 0.423515 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284643e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313539 (min) 0.313578 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328394 (min) 0.40493 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:12 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:12 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:12 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:12 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:12 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:12 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:12 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:12 DEBUG   opendrift.models.basemodel:2057:               -6.0914464885343e-20 <- latitude  -> 8.987459718347066e-06
12:55:12 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.79773061950013e-05
12:55:12 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:12 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4968 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.323074484739092e-12 degrees.
12:55:12 DEBUG   opendrift.readers.basereader.variables:829: Masking 32 elements outside coverage
12:55:12 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 32 elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 32 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 32 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314051 (min) 0.313822 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328479 (min) 0.404817 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:12 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:12 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:12 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:12 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:12 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712297e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313869 (min) 0.313612 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322682 (min) 0.383924 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236417e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313799 (min) 0.313606 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322642 (min) 0.383849 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.329593864231019e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313849 (min) 0.314146 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318143 (min) 0.361346 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:12 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:12 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:12 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:12 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:12 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:12 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:12 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:12 DEBUG   opendrift.models.basemodel:2057:               -5.830929040326326e-20 <- latitude  -> 8.98961381269078e-06
12:55:12 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797248467793246e-05
12:55:12 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:12 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4983 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701527e-12 degrees.
12:55:12 DEBUG   opendrift.readers.basereader.variables:829: Masking 17 elements outside coverage
12:55:12 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 17 elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 17 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 17 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313899 (min) 0.313711 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318159 (min) 0.361558 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:12 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:12 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:12 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:12 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:12 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.373056394177438e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314072 (min) 0.313804 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314766 (min) 0.337904 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.35567138219888e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313991 (min) 0.313754 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314847 (min) 0.337845 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36001763519352e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313742 (min) 0.313746 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313818 (min) 0.314181 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:12 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:12 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:12 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:12 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:12 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:12 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:12 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:12 DEBUG   opendrift.models.basemodel:2057:               -5.0587482347105476e-20 <- latitude  -> 8.990369964240636e-06
12:55:12 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796416782921734e-05
12:55:12 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:12 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4990 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773669378e-12 degrees.
12:55:12 DEBUG   opendrift.readers.basereader.variables:829: Masking 10 elements outside coverage
12:55:12 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 10 elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 10 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 10 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31355 (min) 0.313863 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313868 (min) 0.313334 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:12 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:12 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:12 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:12 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:12 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406156e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314118 (min) 0.313964 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315194 (min) 0.339109 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773669402e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314042 (min) 0.313942 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315191 (min) 0.339214 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664044e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314133 (min) 0.313824 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318103 (min) 0.363151 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:12 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:12 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:12 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:12 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:12 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:12 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:12 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:12 DEBUG   opendrift.models.basemodel:2057:               -3.797631790680475e-20 <- latitude  -> 8.990127997123546e-06
12:55:12 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.795230826523977e-05
12:55:12 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:12 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4994 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150607e-12 degrees.
12:55:12 DEBUG   opendrift.readers.basereader.variables:829: Masking 6 elements outside coverage
12:55:12 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 6 elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 6 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 6 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31414 (min) 0.314136 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318278 (min) 0.352834 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:12 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:12 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:12 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:12 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:12 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637225e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314079 (min) 0.314015 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323005 (min) 0.382966 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145263e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31404 (min) 0.314001 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322955 (min) 0.384038 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642585e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314023 (min) 0.313822 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328614 (min) 0.404762 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:12 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:12 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:12 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:12 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:12 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:12 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:12 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:12 DEBUG   opendrift.models.basemodel:2057:               -3.2228740972252374e-20 <- latitude  -> 8.989166986950778e-06
12:55:12 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7940812815914592e-05
12:55:12 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:12 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4996 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637241e-12 degrees.
12:55:12 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:55:12 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314121 (min) 0.314056 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328583 (min) 0.402122 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:12 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:12 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:12 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:12 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:12 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129153e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313543 (min) 0.313759 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33495 (min) 0.42041 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139871e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313725 (min) 0.313767 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334828 (min) 0.419778 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631833e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314083 (min) 0.313667 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340952 (min) 0.434889 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:12 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:12 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:12 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:12 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:12 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:12 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:12 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:12 DEBUG   opendrift.models.basemodel:2057:               -1.661383081024554e-20 <- latitude  -> 8.987701141579422e-06
12:55:12 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7946561793229227e-05
12:55:12 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:12 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123804e-12 degrees.
12:55:12 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:55:12 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314139 (min) 0.314028 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340807 (min) 0.436692 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:12 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:12 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:12 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:12 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:12 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118454e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314137 (min) 0.314089 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346128 (min) 0.450291 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621133e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314146 (min) 0.314076 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346164 (min) 0.449384 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621136e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314145 (min) 0.314012 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350357 (min) 0.458422 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:12 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:12 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:12 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:12 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:12 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:12 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:12 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:12 DEBUG   opendrift.models.basemodel:2057:               -2.3609396685194502e-20 <- latitude  -> 8.985837699743205e-06
12:55:12 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7950909508839802e-05
12:55:12 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:12 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615784e-12 degrees.
12:55:12 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:55:12 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313983 (min) 0.314099 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350243 (min) 0.460528 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:12 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:12 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:12 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:12 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:12 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113118e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31361 (min) 0.313851 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352864 (min) 0.467095 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615793e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313634 (min) 0.31396 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352604 (min) 0.466423 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113118e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313696 (min) 0.313923 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353574 (min) 0.468239 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:12 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:12 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:12 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:12 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:12 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:12 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:12 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:12 DEBUG   opendrift.models.basemodel:2057:               -9.612739188979683e-21 <- latitude  -> 8.983541485790485e-06
12:55:12 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7953919496336878e-05
12:55:12 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:12 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42521143011312e-12 degrees.
12:55:12 DEBUG   opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
12:55:12 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 1 elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 1 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 1 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31391 (min) 0.313996 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353735 (min) 0.46879 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:12 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:12 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:12 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:12 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:12 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615816e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314043 (min) 0.314097 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352819 (min) 0.468054 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118495e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314019 (min) 0.314074 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352761 (min) 0.467862 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118498e-12 degrees.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314089 (min) 0.31406 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350279 (min) 0.462096 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:12 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:12 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:12 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:12 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:12 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:12 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:12 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:12 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:12 DEBUG   opendrift.models.basemodel:2057:               -6.4503701467540864e-21 <- latitude  -> 8.9861379979032e-06
12:55:12 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.795769816983927e-05
12:55:12 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:12 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610384e-12 degrees.
12:55:12 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:55:12 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:12 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:12 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:12 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:12 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:12 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:12 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:12 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:55:12 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:12 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:12 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313992 (min) 0.31402 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350374 (min) 0.462571 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:12 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:12 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:12 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:12 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:12 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:13 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:13 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:13 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599672e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314048 (min) 0.314124 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34614 (min) 0.4526 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599674e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31403 (min) 0.314105 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346187 (min) 0.452462 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102353e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314142 (min) 0.314027 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340766 (min) 0.439658 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:13 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:13 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:13 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:13 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:13 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:13 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:13 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:13 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:13 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:13 DEBUG   opendrift.models.basemodel:2057:               -7.678869939835082e-21 <- latitude  -> 8.988633850569123e-06
12:55:13 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7960247092381238e-05
12:55:13 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:13 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594323e-12 degrees.
12:55:13 DEBUG   opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
12:55:13 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 5 elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 5 elements
12:55:13 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 5 elements
12:55:13 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314135 (min) 0.313762 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340617 (min) 0.439506 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:13 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:13 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:13 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:13 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:13 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:13 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:13 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086289e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314055 (min) 0.314147 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334497 (min) 0.424494 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588967e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314044 (min) 0.314076 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334575 (min) 0.424491 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588967e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313939 (min) 0.314064 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32854 (min) 0.405807 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:13 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:13 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:13 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:13 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:13 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:13 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:13 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:13 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:13 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:13 DEBUG   opendrift.models.basemodel:2057:               -1.1747672950283935e-20 <- latitude  -> 8.98914413299074e-06
12:55:13 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7964078629710205e-05
12:55:13 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:13 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091659e-12 degrees.
12:55:13 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:13 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:13 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:13 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313867 (min) 0.314117 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328151 (min) 0.404101 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:13 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:13 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:13 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:13 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:13 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:13 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:13 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583628e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313935 (min) 0.314158 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322754 (min) 0.384713 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44476956858899e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313956 (min) 0.31413 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322761 (min) 0.384663 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086313e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314008 (min) 0.314101 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318098 (min) 0.362027 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:13 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:13 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:13 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:13 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:13 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:13 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:13 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:13 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:13 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:13 DEBUG   opendrift.models.basemodel:2057:               -1.7355375524191302e-20 <- latitude  -> 8.987974184771548e-06
12:55:13 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7967182617282583e-05
12:55:13 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:13 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589004e-12 degrees.
12:55:13 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:13 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:13 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:13 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314129 (min) 0.314123 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317942 (min) 0.362075 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:13 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:13 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:13 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:13 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:13 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:13 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:13 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091703e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.3141 (min) 0.313765 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315063 (min) 0.338315 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097066e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314091 (min) 0.313858 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315123 (min) 0.338252 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599745e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314081 (min) 0.314103 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314103 (min) 0.314052 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:13 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:13 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:13 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:13 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:13 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:13 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:13 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:13 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:13 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:13 DEBUG   opendrift.models.basemodel:2057:               -2.3511422032608382e-20 <- latitude  -> 8.98847651442897e-06
12:55:13 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7970604753715373e-05
12:55:13 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:13 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189096973e-12 degrees.
12:55:13 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:13 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:13 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:13 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313978 (min) 0.313848 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313915 (min) 0.314387 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:13 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:13 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:13 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:13 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:13 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:13 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:13 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572861e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314115 (min) 0.314129 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31518 (min) 0.338431 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075543e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314131 (min) 0.314128 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315179 (min) 0.337908 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075543e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314085 (min) 0.314111 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318157 (min) 0.361751 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:13 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:13 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:13 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:13 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:13 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:13 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:13 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:04.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:13 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:13 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:13 DEBUG   opendrift.models.basemodel:2057:               -2.954268711290426e-20 <- latitude  -> 8.989072253207698e-06
12:55:13 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7974189988277014e-05
12:55:13 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:13 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47084708655679e-12 degrees.
12:55:13 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:13 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:13 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:13 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313927 (min) 0.313893 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31818 (min) 0.362539 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:13 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:13 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:13 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:13 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:13 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:13 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:13 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048762e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314132 (min) 0.313947 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322618 (min) 0.384478 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054124e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314126 (min) 0.313788 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322708 (min) 0.385121 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054123e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313731 (min) 0.314108 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32833 (min) 0.406016 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:13 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:13 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:13 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:13 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:13 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:13 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:13 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:04 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:13 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:13 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:13 DEBUG   opendrift.models.basemodel:2057:               -3.395190530688963e-20 <- latitude  -> 8.988769960244935e-06
12:55:13 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797628990500294e-05
12:55:13 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:13 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048773e-12 degrees.
12:55:13 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:13 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:13 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:13 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31387 (min) 0.3141 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328599 (min) 0.406355 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:13 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:13 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:13 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:13 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:13 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:13 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:13 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048788e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314154 (min) 0.31408 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334637 (min) 0.423042 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47302021305415e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314155 (min) 0.314062 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33481 (min) 0.422066 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556834e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314108 (min) 0.313704 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34084 (min) 0.437931 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:13 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:13 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:13 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:13 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:13 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:13 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:13 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:03.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:13 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:13 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:13 DEBUG   opendrift.models.basemodel:2057:               -3.5900664013365586e-20 <- latitude  -> 8.988660770672297e-06
12:55:13 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797955837192859e-05
12:55:13 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:13 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556845e-12 degrees.
12:55:13 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:13 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:13 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:13 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314002 (min) 0.313973 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340681 (min) 0.440616 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:13 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:13 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:13 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:13 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:13 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:13 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:13 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075629e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31404 (min) 0.313825 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346216 (min) 0.451801 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086352e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314094 (min) 0.313881 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34629 (min) 0.450899 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583676e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314003 (min) 0.314109 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350114 (min) 0.460116 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:13 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:13 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:13 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:13 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:13 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:13 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:13 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:03 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:13 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:13 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:13 DEBUG   opendrift.models.basemodel:2057:               -3.399782155366305e-20 <- latitude  -> 8.990198453827543e-06
12:55:13 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798104962966255e-05
12:55:13 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:13 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107823e-12 degrees.
12:55:13 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:13 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:13 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:13 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314089 (min) 0.314108 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350323 (min) 0.462865 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:13 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:13 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:13 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:13 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:13 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:13 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:13 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123863e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314034 (min) 0.314049 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352721 (min) 0.468965 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145306e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314111 (min) 0.314114 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352929 (min) 0.468866 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39696078564799e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314078 (min) 0.314113 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353831 (min) 0.470774 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:13 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:13 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:13 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:13 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:13 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:13 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:13 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:02.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:13 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:13 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:13 DEBUG   opendrift.models.basemodel:2057:               -2.771913643012353e-20 <- latitude  -> 8.99081727302777e-06
12:55:13 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798132489067957e-05
12:55:13 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:13 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599655e-12 degrees.
12:55:13 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:13 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:13 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:13 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314147 (min) 0.314141 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353784 (min) 0.471025 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:13 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:13 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:13 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:13 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:13 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:13 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:13 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064833e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31411 (min) 0.31404 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353068 (min) 0.468678 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44911582158359e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314125 (min) 0.314044 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353059 (min) 0.468619 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578231e-12 degrees.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314111 (min) 0.313878 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350316 (min) 0.46287 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:13 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:13 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:13 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:13 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:13 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:13 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:13 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:13 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:13 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:13 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:13 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:13 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:13 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:13 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:13 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:13 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:13 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:13 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:14 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:14 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:02.500000
12:55:14 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:14 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:14 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:14 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:14 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:14 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:14 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:14 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:14 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:14 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:14 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:14 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:14 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:14 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:14 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:14 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:14 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:14 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:14 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:14 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:14 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:14 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:14.500000 to 2000-01-01 00:00:02.500000)
12:55:14 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:14 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:14 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:14 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:14 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:14 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:14 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:14 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:14 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:14 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:14 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:14 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:14 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:14 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:14 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314144 (min) 0.314099 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31829 (min) 0.36145 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:14 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:14 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:14 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:14 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:14 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:14 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:14 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610413e-12 degrees.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314154 (min) 0.313951 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323034 (min) 0.383661 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615774e-12 degrees.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31415 (min) 0.314107 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323001 (min) 0.383545 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118456e-12 degrees.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31406 (min) 0.31407 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328653 (min) 0.40385 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:14 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:14 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:14 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:14 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:14 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:14 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:14 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:14 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:14 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:14 DEBUG   opendrift.models.basemodel:2057:               -5.950333853432241e-20 <- latitude  -> 8.888211500608617e-06
12:55:14 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7892313437712404e-05
12:55:14 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:14 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4972 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4339039361024e-12 degrees.
12:55:14 DEBUG   opendrift.readers.basereader.variables:829: Masking 28 elements outside coverage
12:55:14 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 28 elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 28 elements
12:55:14 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 28 elements
12:55:14 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314086 (min) 0.314159 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328723 (min) 0.404639 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:14 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:14 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:14 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:14 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:14 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:14 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:14 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605101e-12 degrees.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314028 (min) 0.313841 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334879 (min) 0.423606 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711851e-12 degrees.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314052 (min) 0.313809 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334959 (min) 0.423432 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123873e-12 degrees.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314061 (min) 0.314159 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34102 (min) 0.439013 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:14 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:14 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:14 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:14 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:14 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:14 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:14 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:14 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:14 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:14 DEBUG   opendrift.models.basemodel:2057:               -6.403602196218294e-20 <- latitude  -> 8.93303092764824e-06
12:55:14 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7940373520772507e-05
12:55:14 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:14 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4960 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631938e-12 degrees.
12:55:14 DEBUG   opendrift.readers.basereader.variables:829: Masking 40 elements outside coverage
12:55:14 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 40 elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 40 elements
12:55:14 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 40 elements
12:55:14 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314106 (min) 0.314024 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340705 (min) 0.439906 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:14 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:14 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:14 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:14 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:14 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:14 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:14 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.386095153161462e-12 degrees.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314131 (min) 0.314074 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345924 (min) 0.451597 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.368710141182917e-12 degrees.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314141 (min) 0.313925 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346179 (min) 0.452613 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.366537014684957e-12 degrees.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314083 (min) 0.313752 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35017 (min) 0.461858 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:14 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:14 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:14 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:14 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:14 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:14 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:14 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:14 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:14 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:14 DEBUG   opendrift.models.basemodel:2057:               -6.651459204955001e-20 <- latitude  -> 8.959352126840193e-06
12:55:14 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796447080992291e-05
12:55:14 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:14 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4949 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32742073773389e-12 degrees.
12:55:14 DEBUG   opendrift.readers.basereader.variables:829: Masking 51 elements outside coverage
12:55:14 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 51 elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 51 elements
12:55:14 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 51 elements
12:55:14 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313924 (min) 0.313799 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350462 (min) 0.460393 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:14 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:14 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:14 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:14 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:14 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:14 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:14 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.26222694281437e-12 degrees.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314058 (min) 0.314024 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352939 (min) 0.467008 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.242668804338514e-12 degrees.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314089 (min) 0.314063 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352697 (min) 0.468132 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.23397629834924e-12 degrees.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314022 (min) 0.314095 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353653 (min) 0.469974 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:14 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:14 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:14 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:14 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:14 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:14 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:14 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:14 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:14 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:14 DEBUG   opendrift.models.basemodel:2057:               -6.530476593206816e-20 <- latitude  -> 8.974171072635932e-06
12:55:14 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797509650807006e-05
12:55:14 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:14 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4940 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.22311066586243e-12 degrees.
12:55:14 DEBUG   opendrift.readers.basereader.variables:829: Masking 60 elements outside coverage
12:55:14 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 60 elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 60 elements
12:55:14 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 60 elements
12:55:14 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313526 (min) 0.314085 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353801 (min) 0.467249 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:14 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:14 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:14 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:14 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:14 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:14 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:14 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.255707563322191e-12 degrees.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314075 (min) 0.314106 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352969 (min) 0.465303 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.214418159873133e-12 degrees.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314044 (min) 0.314123 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352865 (min) 0.464284 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.220937539365047e-12 degrees.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313697 (min) 0.313928 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350264 (min) 0.458582 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:14 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:14 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:14 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:14 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:14 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:14 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:14 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:14 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:14 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:14 DEBUG   opendrift.models.basemodel:2057:               -6.390090985525317e-20 <- latitude  -> 8.982259576363e-06
12:55:14 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7978519287132588e-05
12:55:14 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:14 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4938 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195808776e-12 degrees.
12:55:14 DEBUG   opendrift.readers.basereader.variables:829: Masking 62 elements outside coverage
12:55:14 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 62 elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 62 elements
12:55:14 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 62 elements
12:55:14 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313432 (min) 0.313869 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350232 (min) 0.46031 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:14 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:14 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:14 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:14 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:14 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:14 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:14 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.301343219765892e-12 degrees.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.3141 (min) 0.313943 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34581 (min) 0.452464 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195808773e-12 degrees.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314136 (min) 0.313922 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345711 (min) 0.452233 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.273092575300737e-12 degrees.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313816 (min) 0.314083 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340752 (min) 0.43942 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:14 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:14 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:14 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:14 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:14 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:14 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:14 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:14 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:14 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:14 DEBUG   opendrift.models.basemodel:2057:               -6.577019630977779e-20 <- latitude  -> 8.986796442508485e-06
12:55:14 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797747222870822e-05
12:55:14 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:14 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4951 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252478e-12 degrees.
12:55:14 DEBUG   opendrift.readers.basereader.variables:829: Masking 49 elements outside coverage
12:55:14 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 49 elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:14 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:14 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:14 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:14 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:14 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:14 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:14 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:14 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 49 elements
12:55:14 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 49 elements
12:55:14 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:14 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:14 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314081 (min) 0.313545 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340274 (min) 0.438988 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:14 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:14 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:14 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:14 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:14 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:14 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:15 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:15 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:15 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209607e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314048 (min) 0.313459 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334103 (min) 0.422927 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.318728231743803e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314098 (min) 0.313498 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33405 (min) 0.422774 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32307448473909e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314139 (min) 0.313539 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328421 (min) 0.404263 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:15 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:15 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:15 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:15 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:15 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:15 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:15 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:15 DEBUG   opendrift.models.basemodel:2057:               -6.32483728471791e-20 <- latitude  -> 8.98940124278995e-06
12:55:15 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7972305500774136e-05
12:55:15 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:15 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4973 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701563e-12 degrees.
12:55:15 DEBUG   opendrift.readers.basereader.variables:829: Masking 27 elements outside coverage
12:55:15 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 27 elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 27 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 27 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.314085 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32832 (min) 0.404359 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:15 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:15 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:15 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:15 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:15 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.373056394177433e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313897 (min) 0.313453 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322551 (min) 0.384189 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382198874e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31404 (min) 0.313555 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322521 (min) 0.38408 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36219076169084e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314149 (min) 0.31412 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317978 (min) 0.361538 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:15 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:15 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:15 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:15 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:15 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:15 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:15 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:15 DEBUG   opendrift.models.basemodel:2057:               -4.876776026183514e-20 <- latitude  -> 8.990946791331386e-06
12:55:15 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7962350936053328e-05
12:55:15 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:15 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4987 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664015e-12 degrees.
12:55:15 DEBUG   opendrift.readers.basereader.variables:829: Masking 13 elements outside coverage
12:55:15 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 13 elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 13 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 13 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314107 (min) 0.31375 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318014 (min) 0.361476 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:15 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:15 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:15 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:15 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:15 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647964e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314092 (min) 0.31368 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315081 (min) 0.337333 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664041e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314149 (min) 0.31365 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31502 (min) 0.337538 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.388268279658684e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313965 (min) 0.313936 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314006 (min) 0.313621 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:15 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:15 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:15 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:15 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:15 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:15 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:15 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:15 DEBUG   opendrift.models.basemodel:2057:               -5.2921817907247493e-20 <- latitude  -> 8.991871536234233e-06
12:55:15 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7946714563375122e-05
12:55:15 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:15 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4993 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139887e-12 degrees.
12:55:15 DEBUG   opendrift.readers.basereader.variables:829: Masking 7 elements outside coverage
12:55:15 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 7 elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 7 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 7 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314022 (min) 0.313863 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314108 (min) 0.313335 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:15 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:15 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:15 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:15 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:15 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129187e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313886 (min) 0.313924 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314934 (min) 0.33289 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418133898e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313862 (min) 0.313956 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314954 (min) 0.332239 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637225e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314085 (min) 0.314021 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318069 (min) 0.353553 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:15 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:15 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:15 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:15 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:15 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:15 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:15 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:15 DEBUG   opendrift.models.basemodel:2057:               -3.853640823133196e-20 <- latitude  -> 8.992399067472823e-06
12:55:15 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7945029365343763e-05
12:55:15 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:15 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4996 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129206e-12 degrees.
12:55:15 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:55:15 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313992 (min) 0.313811 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318326 (min) 0.362684 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:15 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:15 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:15 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:15 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:15 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118433e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314069 (min) 0.314023 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322774 (min) 0.38267 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41434579762647e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314022 (min) 0.314036 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322895 (min) 0.382213 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118432e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314132 (min) 0.313905 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328441 (min) 0.402286 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:15 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:15 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:15 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:15 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:15 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:15 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:15 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:15 DEBUG   opendrift.models.basemodel:2057:               -2.238280162313518e-20 <- latitude  -> 8.992656208457467e-06
12:55:15 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.79515882647729e-05
12:55:15 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:15 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107723e-12 degrees.
12:55:15 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:55:15 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314006 (min) 0.314149 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328673 (min) 0.402674 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:15 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:15 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:15 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:15 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:15 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313897 (min) 0.314156 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334878 (min) 0.421617 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313834 (min) 0.314146 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334863 (min) 0.420916 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314058 (min) 0.314117 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340914 (min) 0.436226 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:15 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:15 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:15 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:15 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:15 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:15 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:15 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:15 DEBUG   opendrift.models.basemodel:2057:               -3.0612898932437024e-20 <- latitude  -> 8.992729323482257e-06
12:55:15 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7955699310664308e-05
12:55:15 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:15 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097026e-12 degrees.
12:55:15 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:55:15 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31413 (min) 0.313821 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340916 (min) 0.437871 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:15 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:15 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:15 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:15 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:15 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594359e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314027 (min) 0.313998 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346215 (min) 0.451288 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599718e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314097 (min) 0.314018 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346168 (min) 0.451038 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43607706259972e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314063 (min) 0.314016 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350483 (min) 0.460146 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:15 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:15 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:15 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:15 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:15 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:15 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:15 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:15 DEBUG   opendrift.models.basemodel:2057:               -1.1266905437230794e-20 <- latitude  -> 8.992681507905647e-06
12:55:15 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7959742646780953e-05
12:55:15 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:15 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599726e-12 degrees.
12:55:15 DEBUG   opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
12:55:15 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 1 elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 1 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 1 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313754 (min) 0.314104 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350414 (min) 0.46109 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:15 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:15 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:15 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:15 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:15 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102416e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313728 (min) 0.313954 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352829 (min) 0.467302 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107777e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313666 (min) 0.314094 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352988 (min) 0.467385 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605096e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313512 (min) 0.314056 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353885 (min) 0.469212 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:15 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:15 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:15 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:15 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:15 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:15 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:15 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:15 DEBUG   opendrift.models.basemodel:2057:               -4.24238121655606e-21 <- latitude  -> 8.992552639035606e-06
12:55:15 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7961801824998304e-05
12:55:15 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:15 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605014e-12 degrees.
12:55:15 DEBUG   opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
12:55:15 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 1 elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 1 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 1 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313968 (min) 0.313702 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3538 (min) 0.468825 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:15 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:15 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:15 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:15 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:15 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189096981e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314145 (min) 0.31414 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35266 (min) 0.465784 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594304e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314131 (min) 0.314135 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352861 (min) 0.466802 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189096982e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314131 (min) 0.313977 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350254 (min) 0.461075 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:15 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:15 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:15 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:15 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:15 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:15 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:15 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:15 DEBUG   opendrift.models.basemodel:2057:               -3.0320202920161546e-21 <- latitude  -> 8.992776216075061e-06
12:55:15 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796502306591055e-05
12:55:15 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:15 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091625e-12 degrees.
12:55:15 DEBUG   opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
12:55:15 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 1 elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 1 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 1 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314015 (min) 0.314081 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350302 (min) 0.460939 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:15 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:15 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:15 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:15 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:15 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45128894808091e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313744 (min) 0.313922 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345972 (min) 0.452515 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080912e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313691 (min) 0.313771 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345954 (min) 0.452552 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578233e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313992 (min) 0.314139 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340346 (min) 0.439751 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:15 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:15 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:15 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:15 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:15 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:15 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:15 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:15 DEBUG   opendrift.models.basemodel:2057:               -5.680745845804971e-21 <- latitude  -> 8.992940799135026e-06
12:55:15 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796698567020425e-05
12:55:15 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:15 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070197e-12 degrees.
12:55:15 DEBUG   opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
12:55:15 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 3 elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 3 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 3 elements
12:55:15 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313841 (min) 0.314125 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340005 (min) 0.440074 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:15 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:15 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:15 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:15 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:15 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:15 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567525e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314094 (min) 0.313951 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334033 (min) 0.423987 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070207e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314111 (min) 0.313895 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.333913 (min) 0.423812 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:15 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070208e-12 degrees.
12:55:15 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:15 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:15 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313985 (min) 0.313867 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328141 (min) 0.405219 (max)
12:55:15 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:15 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:15 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:15 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:15 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:15 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:15 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:15 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:15 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:15 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:15 DEBUG   opendrift.models.basemodel:2057:               -1.050177679909853e-20 <- latitude  -> 8.99303505130865e-06
12:55:15 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7969717331230863e-05
12:55:15 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:15 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:15 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:15 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:15 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:15 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567533e-12 degrees.
12:55:16 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:16 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:16 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:16 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313931 (min) 0.31316 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328514 (min) 0.404393 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:16 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:16 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:16 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:16 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:16 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:16 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:16 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064211e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314141 (min) 0.313752 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322725 (min) 0.383936 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064865e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314128 (min) 0.313871 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322675 (min) 0.383886 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070223e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313992 (min) 0.313996 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31802 (min) 0.361374 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:16 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:16 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:16 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:16 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:16 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:16 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:16 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:16 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:16 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:16 DEBUG   opendrift.models.basemodel:2057:               -1.6545326130624195e-20 <- latitude  -> 8.99309214952068e-06
12:55:16 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797234583510032e-05
12:55:16 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:16 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070234e-12 degrees.
12:55:16 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:16 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:16 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:16 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314127 (min) 0.314132 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318181 (min) 0.362307 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:16 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:16 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:16 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:16 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:16 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:16 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:16 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075608e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314048 (min) 0.314129 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315071 (min) 0.338291 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45346207457829e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314036 (min) 0.314146 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315082 (min) 0.338268 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578291e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31412 (min) 0.314057 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313736 (min) 0.314356 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:16 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:16 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:16 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:16 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:16 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:16 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:16 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:16 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:16 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:16 DEBUG   opendrift.models.basemodel:2057:               -2.3100490426045024e-20 <- latitude  -> 8.993128273573046e-06
12:55:16 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7974345738244787e-05
12:55:16 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:16 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589022e-12 degrees.
12:55:16 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:16 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:16 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:16 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313697 (min) 0.314152 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314149 (min) 0.314151 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:16 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:16 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:16 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:16 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:16 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:16 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:16 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599765e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314123 (min) 0.314016 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31487 (min) 0.338243 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107814e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31411 (min) 0.313929 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315042 (min) 0.338144 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113173e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314073 (min) 0.313936 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317735 (min) 0.361632 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:16 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:16 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:16 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:16 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:16 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:16 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:16 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:04.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:16 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:16 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:16 DEBUG   opendrift.models.basemodel:2057:               -2.9190446198188773e-20 <- latitude  -> 8.993150658093169e-06
12:55:16 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977572712888846e-05
12:55:16 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:16 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134638e-12 degrees.
12:55:16 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:16 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:16 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:16 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313774 (min) 0.314086 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318088 (min) 0.361506 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:16 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:16 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:16 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:16 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:16 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:16 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:16 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134465e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313871 (min) 0.31401 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322852 (min) 0.38461 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139826e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313851 (min) 0.313863 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322813 (min) 0.385315 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642508e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314114 (min) 0.314086 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328637 (min) 0.406276 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:16 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:16 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:16 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:16 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:16 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:16 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:16 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:04 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:16 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:16 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:16 DEBUG   opendrift.models.basemodel:2057:               -3.384306793430571e-20 <- latitude  -> 8.993161442694806e-06
12:55:16 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7978070568611596e-05
12:55:16 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:16 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43825018909696e-12 degrees.
12:55:16 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:16 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:16 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:16 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313936 (min) 0.314012 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328507 (min) 0.405906 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:16 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:16 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:16 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:16 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:16 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:16 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:16 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46650083356213e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314129 (min) 0.314158 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334582 (min) 0.424711 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075532e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314101 (min) 0.314123 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334803 (min) 0.424833 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567489e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314051 (min) 0.314135 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340603 (min) 0.44073 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:16 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:16 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:16 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:16 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:16 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:16 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:16 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:03.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:16 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:16 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:16 DEBUG   opendrift.models.basemodel:2057:               -3.5714071525425995e-20 <- latitude  -> 8.993158326362556e-06
12:55:16 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7981245626474817e-05
12:55:16 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:16 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546061e-12 degrees.
12:55:16 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:16 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:16 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:16 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313905 (min) 0.31415 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340526 (min) 0.440099 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:16 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:16 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:16 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:16 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:16 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:16 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:16 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.499097731021949e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314033 (min) 0.314051 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346203 (min) 0.453653 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032667e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313949 (min) 0.314098 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346271 (min) 0.453549 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529988e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314124 (min) 0.314032 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350303 (min) 0.462908 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:16 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:16 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:16 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:16 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:16 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:16 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:16 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:03 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:16 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:16 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:16 DEBUG   opendrift.models.basemodel:2057:               -3.385614230484711e-20 <- latitude  -> 8.993132589266557e-06
12:55:16 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7982879737819192e-05
12:55:16 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:16 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.503443984015936e-12 degrees.
12:55:16 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:16 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:16 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:16 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314053 (min) 0.314125 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350283 (min) 0.462352 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:16 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:16 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:16 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:16 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:16 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:16 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:16 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.507790237011239e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313894 (min) 0.314075 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352971 (min) 0.468653 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.5034439840166e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313749 (min) 0.314043 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353028 (min) 0.468134 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.505617110513921e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313832 (min) 0.313982 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353841 (min) 0.470043 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:16 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:16 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:16 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:16 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:16 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:16 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:16 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:16 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:03
12:55:16 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:16 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:16 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:16 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:16 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:16 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:16 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:16 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:16 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:16 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:16 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:16 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:16 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:16 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:16 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:16 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:16 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:16 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:16 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:16 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:16 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:16 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:15 to 2000-01-01 00:00:03)
12:55:16 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:16 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:16 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:16 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:16 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:16 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:16 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:16 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:16 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:16 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:16 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:16 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:16 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:16 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:16 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:16 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:16 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:16 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:16 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:16 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:16 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:16 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:16 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:16 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:16 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.314158 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314157 (min) 0.31427 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:16 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:16 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:16 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:16 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:16 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:16 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:17 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:17 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:17 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43173080960505e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314101 (min) 0.314137 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315138 (min) 0.338278 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615126e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314089 (min) 0.314066 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31517 (min) 0.338138 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118454e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314123 (min) 0.31405 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318287 (min) 0.361393 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:17 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:17 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:17 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:17 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:17 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:17 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:17 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:17 DEBUG   opendrift.models.basemodel:2057:               -5.3904392621716194e-20 <- latitude  -> 8.886706399352454e-06
12:55:17 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7884137397068614e-05
12:55:17 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:17 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4975 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610239e-12 degrees.
12:55:17 DEBUG   opendrift.readers.basereader.variables:829: Masking 25 elements outside coverage
12:55:17 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 25 elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 25 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 25 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314023 (min) 0.314159 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318175 (min) 0.361844 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:17 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:17 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:17 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:17 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:17 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42955768310777e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314023 (min) 0.314048 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322832 (min) 0.384365 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615819e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314048 (min) 0.314146 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322918 (min) 0.384424 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118498e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314139 (min) 0.313856 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328694 (min) 0.404934 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:17 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:17 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:17 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:17 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:17 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:17 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:17 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:17 DEBUG   opendrift.models.basemodel:2057:               -5.95295833036967e-20 <- latitude  -> 8.930621622685898e-06
12:55:17 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7932708283448507e-05
12:55:17 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:17 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4962 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626565e-12 degrees.
12:55:17 DEBUG   opendrift.readers.basereader.variables:829: Masking 38 elements outside coverage
12:55:17 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 38 elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 38 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 38 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313969 (min) 0.314125 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328741 (min) 0.405627 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:17 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:17 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:17 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:17 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:17 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642682e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314095 (min) 0.314081 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334907 (min) 0.423459 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664128e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314085 (min) 0.313944 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.335005 (min) 0.424147 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166812e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314057 (min) 0.314011 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340723 (min) 0.439885 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:17 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:17 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:17 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:17 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:17 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:17 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:17 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:17 DEBUG   opendrift.models.basemodel:2057:               -6.38071397160101e-20 <- latitude  -> 8.95700656830928e-06
12:55:17 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7959711350807904e-05
12:55:17 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:17 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4949 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701697e-12 degrees.
12:55:17 DEBUG   opendrift.readers.basereader.variables:829: Masking 51 elements outside coverage
12:55:17 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 51 elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 51 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 51 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314154 (min) 0.313995 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341003 (min) 0.439568 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:17 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:17 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:17 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:17 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:17 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.301343219766081e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314059 (min) 0.31411 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346318 (min) 0.453619 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787544e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313725 (min) 0.313983 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34633 (min) 0.45306 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.277438828295591e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314144 (min) 0.31356 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350383 (min) 0.462333 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:17 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:17 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:17 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:17 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:17 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:17 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:17 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:17 DEBUG   opendrift.models.basemodel:2057:               -6.497730738581401e-20 <- latitude  -> 8.972735980012758e-06
12:55:17 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7972864042685904e-05
12:55:17 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:17 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4937 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.210071906878745e-12 degrees.
12:55:17 DEBUG   opendrift.readers.basereader.variables:829: Masking 63 elements outside coverage
12:55:17 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 63 elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 63 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 63 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314051 (min) 0.314058 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350375 (min) 0.460727 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:17 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:17 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:17 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:17 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:17 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.22745691885706e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314007 (min) 0.311956 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353044 (min) 0.468884 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.183994388910661e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313837 (min) 0.311742 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35307 (min) 0.468398 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.190513768402582e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313948 (min) 0.311412 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353974 (min) 0.470232 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:17 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:17 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:17 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:17 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:17 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:17 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:17 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:17 DEBUG   opendrift.models.basemodel:2057:               -6.432369494777881e-20 <- latitude  -> 8.981893517144047e-06
12:55:17 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977915451262438e-05
12:55:17 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:17 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4930 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24049567784091e-12 degrees.
12:55:17 DEBUG   opendrift.readers.basereader.variables:829: Masking 70 elements outside coverage
12:55:17 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 70 elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 70 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 70 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314009 (min) 0.314081 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353827 (min) 0.464498 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:17 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:17 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:17 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:17 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:17 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.281785081289994e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313387 (min) 0.313672 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352785 (min) 0.46856 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.240495677840947e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313385 (min) 0.313494 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352836 (min) 0.468246 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.251361310327522e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313554 (min) 0.313554 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350171 (min) 0.46243 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:17 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:17 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:17 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:17 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:17 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:17 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:17 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:17 DEBUG   opendrift.models.basemodel:2057:               -6.674302092720715e-20 <- latitude  -> 8.986957682614185e-06
12:55:17 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797793293752392e-05
12:55:17 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:17 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4927 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.296996966771268e-12 degrees.
12:55:17 DEBUG   opendrift.readers.basereader.variables:829: Masking 73 elements outside coverage
12:55:17 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 73 elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 73 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 73 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314003 (min) 0.313481 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350225 (min) 0.461075 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:17 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:17 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:17 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:17 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:17 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.333940117225686e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314033 (min) 0.313517 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346152 (min) 0.451637 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.301343219765883e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314063 (min) 0.31349 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346131 (min) 0.451357 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.307862599257208e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313815 (min) 0.313439 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340568 (min) 0.438615 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:17 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:17 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:17 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:17 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:17 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:17 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:17 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:17 DEBUG   opendrift.models.basemodel:2057:               -6.416122146265701e-20 <- latitude  -> 8.989672716529332e-06
12:55:17 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7973444877836788e-05
12:55:17 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:17 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4946 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712252e-12 degrees.
12:55:17 DEBUG   opendrift.readers.basereader.variables:829: Masking 54 elements outside coverage
12:55:17 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 54 elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 54 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 54 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314069 (min) 0.313857 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340545 (min) 0.438854 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:17 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:17 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:17 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:17 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:17 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.368710141182763e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314033 (min) 0.314085 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334613 (min) 0.42274 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209612e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314082 (min) 0.314077 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33464 (min) 0.422805 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129204201e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314146 (min) 0.313963 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328417 (min) 0.404278 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:17 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:17 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:17 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:17 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:17 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:17 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:17 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:17 DEBUG   opendrift.models.basemodel:2057:               -5.2444617763333005e-20 <- latitude  -> 8.990987683578054e-06
12:55:17 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7963380759647875e-05
12:55:17 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:17 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4979 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172076e-12 degrees.
12:55:17 DEBUG   opendrift.readers.basereader.variables:829: Masking 21 elements outside coverage
12:55:17 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 21 elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 21 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 21 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31342 (min) 0.313958 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328358 (min) 0.40493 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:17 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:17 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:17 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:17 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:17 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912144603e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313856 (min) 0.31388 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322773 (min) 0.383357 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664014e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313704 (min) 0.313813 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322755 (min) 0.383328 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.386095153161333e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314074 (min) 0.313589 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317766 (min) 0.36083 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:17 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:17 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:17 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:17 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:17 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:17 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:17 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:17 DEBUG   opendrift.models.basemodel:2057:               -4.850328857046745e-20 <- latitude  -> 8.9913772881486e-06
12:55:17 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.794584669664577e-05
12:55:17 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:17 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4992 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139921e-12 degrees.
12:55:17 DEBUG   opendrift.readers.basereader.variables:829: Masking 8 elements outside coverage
12:55:17 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 8 elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 8 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 8 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314111 (min) 0.313693 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317234 (min) 0.361755 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:17 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:17 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:17 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:17 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:17 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41869205062112e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.3141 (min) 0.313869 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314984 (min) 0.337448 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134515e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314144 (min) 0.313873 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314984 (min) 0.337646 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134515e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31394 (min) 0.314023 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313867 (min) 0.313267 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:17 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:17 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:17 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:17 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:17 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:17 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:17 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:17 DEBUG   opendrift.models.basemodel:2057:               -5.267169138198054e-20 <- latitude  -> 8.991068811849298e-06
12:55:17 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7945807353825882e-05
12:55:17 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:17 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42955768310774e-12 degrees.
12:55:17 DEBUG   opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
12:55:17 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 5 elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 5 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 5 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.313697 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314044 (min) 0.313394 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:17 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:17 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:17 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:17 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:17 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605074e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314013 (min) 0.314135 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315078 (min) 0.338314 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113118e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314107 (min) 0.314134 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315016 (min) 0.338128 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113118e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314112 (min) 0.313947 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318244 (min) 0.361487 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:17 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:17 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:17 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:17 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:17 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:17 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:17 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:17 DEBUG   opendrift.models.basemodel:2057:               -2.6136369802799346e-20 <- latitude  -> 8.99020084486236e-06
12:55:17 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7953929259501378e-05
12:55:17 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:17 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113134e-12 degrees.
12:55:17 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:55:17 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:55:17 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314069 (min) 0.314006 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318263 (min) 0.360997 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:17 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:17 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:17 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:17 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:17 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:17 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599668e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313932 (min) 0.314057 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322968 (min) 0.383166 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43173080960502e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313994 (min) 0.314046 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322939 (min) 0.382911 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43173080960502e-12 degrees.
12:55:17 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:17 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:17 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314131 (min) 0.314101 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328554 (min) 0.403139 (max)
12:55:17 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:17 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:17 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:17 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:17 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:17 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:17 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:17 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:17 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:17 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:17 DEBUG   opendrift.models.basemodel:2057:               -3.643561167114814e-20 <- latitude  -> 8.989673555088308e-06
12:55:17 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7958847324942188e-05
12:55:17 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:17 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:17 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:17 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:17 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:17 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:55:17 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:17 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091633e-12 degrees.
12:55:18 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:55:18 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313936 (min) 0.313825 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328402 (min) 0.403827 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:18 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:18 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:18 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:18 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:18 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583602e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314002 (min) 0.314141 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33478 (min) 0.422479 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44694269508628e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314041 (min) 0.31414 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334622 (min) 0.422407 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583602e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313748 (min) 0.314121 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34094 (min) 0.437894 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:18 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:18 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:18 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:18 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:18 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:18 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:18 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:18 DEBUG   opendrift.models.basemodel:2057:               -1.2814519655880018e-20 <- latitude  -> 8.990941865836826e-06
12:55:18 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796312781757677e-05
12:55:18 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:18 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583607e-12 degrees.
12:55:18 DEBUG   opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
12:55:18 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 1 elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 1 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 1 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314153 (min) 0.314145 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.339401 (min) 0.438692 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:18 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:18 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:18 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:18 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:18 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578256e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314153 (min) 0.31397 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345333 (min) 0.4522 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578256e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31414 (min) 0.313949 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34563 (min) 0.451628 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080938e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314002 (min) 0.31401 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.349976 (min) 0.460804 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:18 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:18 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:18 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:18 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:18 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:18 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:18 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:18 DEBUG   opendrift.models.basemodel:2057:               -2.00447206483608e-21 <- latitude  -> 8.991943929125258e-06
12:55:18 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796514007944777e-05
12:55:18 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:18 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572906e-12 degrees.
12:55:18 DEBUG   opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
12:55:18 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 1 elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 1 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 1 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313999 (min) 0.313859 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.349836 (min) 0.461875 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:18 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:18 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:18 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:18 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:18 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075596e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313987 (min) 0.313969 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352405 (min) 0.46664 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578273e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313938 (min) 0.314007 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35256 (min) 0.465861 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578273e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31384 (min) 0.313923 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353244 (min) 0.467664 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:18 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:18 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:18 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:18 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:18 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:18 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:18 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:18 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992511842142995e-06
12:55:18 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7968115892271834e-05
12:55:18 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:18 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578281e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313161 (min) 0.314098 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353957 (min) 0.468866 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:18 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:18 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:18 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:18 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:18 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583649e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314157 (min) 0.314113 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353061 (min) 0.468056 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583647e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31415 (min) 0.314151 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35306 (min) 0.467582 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583649e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314094 (min) 0.314101 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350254 (min) 0.461824 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:18 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:18 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:18 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:18 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:18 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:18 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:18 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:18 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992826512247308e-06
12:55:18 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7969915011220174e-05
12:55:18 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:18 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589017e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313676 (min) 0.314001 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350279 (min) 0.462404 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:18 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:18 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:18 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:18 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:18 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44042331559439e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313945 (min) 0.313902 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345781 (min) 0.453313 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097073e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31392 (min) 0.313842 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345815 (min) 0.453073 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594393e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314122 (min) 0.313245 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340633 (min) 0.440211 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:18 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:18 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:18 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:18 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:18 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:18 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:18 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:18 DEBUG   opendrift.models.basemodel:2057:               -3.5388153367558194e-21 <- latitude  -> 8.992997243373206e-06
12:55:18 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797078792468351e-05
12:55:18 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:18 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605124e-12 degrees.
12:55:18 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:55:18 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31391 (min) 0.314158 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340817 (min) 0.44001 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:18 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:18 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:18 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:18 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:18 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118538e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313969 (min) 0.314115 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334618 (min) 0.423315 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123902e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314014 (min) 0.314131 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334641 (min) 0.423211 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626583e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314111 (min) 0.314137 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328375 (min) 0.404635 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:18 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:18 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:18 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:18 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:18 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:18 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:18 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:18 DEBUG   opendrift.models.basemodel:2057:               -9.24158420204849e-21 <- latitude  -> 8.993083894342125e-06
12:55:18 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7973845216317734e-05
12:55:18 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:18 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107681e-12 degrees.
12:55:18 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:18 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314076 (min) 0.314054 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328127 (min) 0.405597 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:18 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:18 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:18 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:18 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:18 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086248e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313882 (min) 0.314097 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322431 (min) 0.383051 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091606e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313867 (min) 0.314113 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322477 (min) 0.382791 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091606e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314081 (min) 0.31402 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317756 (min) 0.360583 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:18 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:18 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:18 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:18 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:18 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:18 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:18 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:18 DEBUG   opendrift.models.basemodel:2057:               -1.5862159916305818e-20 <- latitude  -> 8.993116827471547e-06
12:55:18 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797578222431339e-05
12:55:18 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:18 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070173e-12 degrees.
12:55:18 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:18 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314042 (min) 0.314074 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31816 (min) 0.361694 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:18 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:18 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:18 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:18 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:18 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054102e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314009 (min) 0.314136 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314946 (min) 0.33828 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556782e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313994 (min) 0.314095 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314962 (min) 0.338209 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556782e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314069 (min) 0.314151 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313136 (min) 0.31439 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:18 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:18 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:18 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:18 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:18 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:18 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:18 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:18 DEBUG   opendrift.models.basemodel:2057:               -2.26664016788814e-20 <- latitude  -> 8.99311101756171e-06
12:55:18 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976038239713444e-05
12:55:18 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:18 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546067e-12 degrees.
12:55:18 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:18 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314086 (min) 0.31415 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313493 (min) 0.314399 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:18 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:18 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:18 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:18 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:18 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038033e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314082 (min) 0.31411 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31517 (min) 0.338893 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038033e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314067 (min) 0.314085 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315092 (min) 0.338672 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540713e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313539 (min) 0.314115 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317993 (min) 0.362558 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:18 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:18 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:18 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:18 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:18 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:18 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:04.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:18 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:18 DEBUG   opendrift.models.basemodel:2057:               -2.895476471947577e-20 <- latitude  -> 8.993075150746559e-06
12:55:18 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.79796323006998e-05
12:55:18 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:18 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535359e-12 degrees.
12:55:18 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:18 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314107 (min) 0.314057 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318234 (min) 0.362354 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:18 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:18 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:18 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:18 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:18 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49475147802733e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313978 (min) 0.313987 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322687 (min) 0.384553 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032691e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314006 (min) 0.313886 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322651 (min) 0.384248 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535373e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314156 (min) 0.31412 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328643 (min) 0.404873 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:18 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:18 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:18 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:18 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:18 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:18 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:04 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:18 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:18 DEBUG   opendrift.models.basemodel:2057:               -3.3584417252018513e-20 <- latitude  -> 8.993016463404999e-06
12:55:18 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798131526419218e-05
12:55:18 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:18 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535378e-12 degrees.
12:55:18 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:18 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314135 (min) 0.313872 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328422 (min) 0.406275 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:18 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:18 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:18 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:18 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:18 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:18 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038068e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31391 (min) 0.314044 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334836 (min) 0.424633 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546114e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313876 (min) 0.314075 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334899 (min) 0.424127 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043435e-12 degrees.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313902 (min) 0.313871 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.339865 (min) 0.439933 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:18 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:18 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:18 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:18 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:18 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:18 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:18 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:03.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:18 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:18 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:18 DEBUG   opendrift.models.basemodel:2057:               -3.566133692735754e-20 <- latitude  -> 8.992940311662152e-06
12:55:18 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.79809097005119e-05
12:55:18 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:18 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054171e-12 degrees.
12:55:18 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:18 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:18 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:18 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:18 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:18 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:18 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:18 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:18 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:18 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:18 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:18 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314105 (min) 0.31415 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.339991 (min) 0.439086 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:18 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:19 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:19 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:19 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:19 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:19 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:19 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:19 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054133e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314028 (min) 0.313884 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346252 (min) 0.453417 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064857e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314045 (min) 0.313922 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346112 (min) 0.453471 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064857e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313947 (min) 0.31405 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350357 (min) 0.462851 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:19 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:19 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:19 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:19 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:19 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:19 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:19 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:19 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:03.500000
12:55:19 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:19 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:19 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:19 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:19 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:19 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:19 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:19 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:19 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:19 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:19 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:19 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:19 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:19 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:19 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:19 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:19 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:19 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:19 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:19 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:19 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:19 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:15.500000 to 2000-01-01 00:00:03.500000)
12:55:19 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:19 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:19 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:19 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:19 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:19 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:19 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:19 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:19 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:19 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:19 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:19 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:19 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:19 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:19 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314065 (min) 0.314156 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317981 (min) 0.361961 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:19 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:19 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:19 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:19 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:19 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:19 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:19 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610408e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314121 (min) 0.314115 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315116 (min) 0.337868 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118448e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314103 (min) 0.314044 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315104 (min) 0.337937 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050620482e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314148 (min) 0.314158 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314153 (min) 0.3142 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:19 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:19 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:19 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:19 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:19 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:19 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:19 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:19 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:19 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:19 DEBUG   opendrift.models.basemodel:2057:               -4.618766844970814e-20 <- latitude  -> 8.886642547643857e-06
12:55:19 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7874986027492632e-05
12:55:19 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:19 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4979 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102388e-12 degrees.
12:55:19 DEBUG   opendrift.readers.basereader.variables:829: Masking 21 elements outside coverage
12:55:19 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 21 elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 21 elements
12:55:19 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 21 elements
12:55:19 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314048 (min) 0.314052 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313897 (min) 0.314403 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:19 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:19 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:19 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:19 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:19 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:19 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:19 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102405e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314061 (min) 0.313844 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315121 (min) 0.338519 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610444e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314086 (min) 0.314009 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314957 (min) 0.33844 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610449e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314095 (min) 0.313921 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318316 (min) 0.36187 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:19 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:19 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:19 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:19 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:19 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:19 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:19 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:19 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:19 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:19 DEBUG   opendrift.models.basemodel:2057:               -5.3895612233271496e-20 <- latitude  -> 8.929484336244802e-06
12:55:19 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7922893803644486e-05
12:55:19 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:19 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4966 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615832e-12 degrees.
12:55:19 DEBUG   opendrift.readers.basereader.variables:829: Masking 34 elements outside coverage
12:55:19 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 34 elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 34 elements
12:55:19 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 34 elements
12:55:19 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313929 (min) 0.314158 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318262 (min) 0.362124 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:19 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:19 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:19 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:19 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:19 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:19 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:19 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134615e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314157 (min) 0.313901 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322865 (min) 0.385076 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642668e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314154 (min) 0.313984 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322672 (min) 0.384642 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785648028e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314005 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328661 (min) 0.405284 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:19 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:19 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:19 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:19 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:19 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:19 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:19 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:19 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:19 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:19 DEBUG   opendrift.models.basemodel:2057:               -5.955522275724823e-20 <- latitude  -> 8.955106312483442e-06
12:55:19 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.795274873524454e-05
12:55:19 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:19 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4950 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172187e-12 degrees.
12:55:19 DEBUG   opendrift.readers.basereader.variables:829: Masking 50 elements outside coverage
12:55:19 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 50 elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 50 elements
12:55:19 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 50 elements
12:55:19 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313842 (min) 0.314049 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328445 (min) 0.404961 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:19 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:19 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:19 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:19 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:19 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:19 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:19 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717792e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314021 (min) 0.313996 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334938 (min) 0.424831 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32524761123657e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314049 (min) 0.314068 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334972 (min) 0.424247 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.318728231743971e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314151 (min) 0.313656 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340973 (min) 0.440033 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:19 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:19 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:19 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:19 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:19 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:19 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:19 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:19 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:19 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:19 DEBUG   opendrift.models.basemodel:2057:               -6.296125915201179e-20 <- latitude  -> 8.970850141566913e-06
12:55:19 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7969076504317052e-05
12:55:19 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:19 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4936 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.273092575300322e-12 degrees.
12:55:19 DEBUG   opendrift.readers.basereader.variables:829: Masking 64 elements outside coverage
12:55:19 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 64 elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 64 elements
12:55:19 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 64 elements
12:55:19 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314092 (min) 0.313498 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34087 (min) 0.436328 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:19 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:19 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:19 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:19 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:19 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:19 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:19 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.197033147894621e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314132 (min) 0.313791 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34632 (min) 0.446107 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.162263123937754e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31412 (min) 0.313567 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346172 (min) 0.445643 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.157916870942493e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314065 (min) 0.313211 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350161 (min) 0.455113 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:19 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:19 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:19 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:19 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:19 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:19 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:19 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:19 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:19 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:19 DEBUG   opendrift.models.basemodel:2057:               -6.473325370574387e-20 <- latitude  -> 8.98054392755845e-06
12:55:19 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976498642497422e-05
12:55:19 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:19 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4925 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.203552527386514e-12 degrees.
12:55:19 DEBUG   opendrift.readers.basereader.variables:829: Masking 75 elements outside coverage
12:55:19 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 75 elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 75 elements
12:55:19 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 75 elements
12:55:19 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313939 (min) 0.313615 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350155 (min) 0.459399 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:19 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:19 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:19 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:19 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:19 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:19 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:19 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.244841930835586e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313782 (min) 0.314027 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353122 (min) 0.461298 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.203552527386483e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313735 (min) 0.313948 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353054 (min) 0.460839 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.210071906878449e-12 degrees.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31373 (min) 0.313929 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353922 (min) 0.462968 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:19 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:19 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:19 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:19 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:19 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:19 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:19 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:19 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:19 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:19 DEBUG   opendrift.models.basemodel:2057:               -5.833816570607565e-20 <- latitude  -> 8.986204572405717e-06
12:55:19 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7978231062465974e-05
12:55:19 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:19 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4920 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.262226942814166e-12 degrees.
12:55:19 DEBUG   opendrift.readers.basereader.variables:829: Masking 80 elements outside coverage
12:55:19 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 80 elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:19 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:19 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:19 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:19 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:19 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:19 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:19 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:19 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 80 elements
12:55:19 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 80 elements
12:55:19 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:19 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:19 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313646 (min) 0.313542 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353675 (min) 0.469343 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:19 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:19 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:19 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:19 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:19 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:19 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:20 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:20 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:20 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472760491e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314121 (min) 0.313719 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352899 (min) 0.466449 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.270919448803369e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314093 (min) 0.313672 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352815 (min) 0.465852 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.277438828295373e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314124 (min) 0.313604 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350155 (min) 0.460099 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:20 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:20 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:20 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:20 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:20 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:20 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:20 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:20 DEBUG   opendrift.models.basemodel:2057:               -6.424552397443655e-20 <- latitude  -> 8.989339149037995e-06
12:55:20 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7975331071846292e-05
12:55:20 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:20 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4919 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.327420737733706e-12 degrees.
12:55:20 DEBUG   opendrift.readers.basereader.variables:829: Masking 81 elements outside coverage
12:55:20 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 81 elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 81 elements
12:55:20 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 81 elements
12:55:20 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314055 (min) 0.314065 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350003 (min) 0.460604 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:20 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:20 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:20 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:20 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:20 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382198868e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314099 (min) 0.313803 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346004 (min) 0.451301 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728345e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314007 (min) 0.313782 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346076 (min) 0.451229 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.333940117225671e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313554 (min) 0.314153 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340598 (min) 0.43849 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:20 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:20 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:20 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:20 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:20 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:20 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:20 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:20 DEBUG   opendrift.models.basemodel:2057:               -6.420807899057574e-20 <- latitude  -> 8.991033625413105e-06
12:55:20 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7966795881703458e-05
12:55:20 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:20 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4939 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267679456e-12 degrees.
12:55:20 DEBUG   opendrift.readers.basereader.variables:829: Masking 61 elements outside coverage
12:55:20 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 61 elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 61 elements
12:55:20 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 61 elements
12:55:20 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313808 (min) 0.313893 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340573 (min) 0.438409 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:20 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:20 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:20 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:20 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:20 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38826827965864e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314056 (min) 0.313784 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334385 (min) 0.42326 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680078e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314032 (min) 0.313845 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334411 (min) 0.423257 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674722e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313892 (min) 0.313828 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32799 (min) 0.404687 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:20 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:20 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:20 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:20 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:20 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:20 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:20 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:20 DEBUG   opendrift.models.basemodel:2057:               -5.109096345901577e-20 <- latitude  -> 8.991881480361118e-06
12:55:20 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.795015217409933e-05
12:55:20 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:20 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4985 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39696078564795e-12 degrees.
12:55:20 DEBUG   opendrift.readers.basereader.variables:829: Masking 15 elements outside coverage
12:55:20 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 15 elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 15 elements
12:55:20 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 15 elements
12:55:20 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313684 (min) 0.313746 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328317 (min) 0.403323 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:20 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:20 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:20 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:20 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:20 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626473e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313886 (min) 0.314027 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322766 (min) 0.384415 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139873e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313701 (min) 0.314027 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322746 (min) 0.384346 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139873e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314006 (min) 0.313935 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318051 (min) 0.361727 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:20 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:20 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:20 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:20 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:20 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:20 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:20 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:20 DEBUG   opendrift.models.basemodel:2057:               -4.718213563134169e-20 <- latitude  -> 8.992182366159735e-06
12:55:20 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7943457352583435e-05
12:55:20 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:20 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113097e-12 degrees.
12:55:20 DEBUG   opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
12:55:20 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 5 elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 5 elements
12:55:20 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 5 elements
12:55:20 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314156 (min) 0.314073 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318065 (min) 0.361795 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:20 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:20 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:20 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:20 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:20 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102398e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313942 (min) 0.313842 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315153 (min) 0.338078 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113118e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314084 (min) 0.313797 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315164 (min) 0.338048 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610437e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313967 (min) 0.314068 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31408 (min) 0.314351 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:20 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:20 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:20 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:20 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:20 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:20 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:20 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:20 DEBUG   opendrift.models.basemodel:2057:               -4.4037809053341246e-20 <- latitude  -> 8.992083112930041e-06
12:55:20 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7953963039154786e-05
12:55:20 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:20 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42955768310778e-12 degrees.
12:55:20 DEBUG   opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
12:55:20 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 3 elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 3 elements
12:55:20 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 3 elements
12:55:20 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313941 (min) 0.314129 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314019 (min) 0.314196 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:20 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:20 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:20 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:20 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:20 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091627e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314073 (min) 0.314 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314457 (min) 0.338166 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610234e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314131 (min) 0.313977 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314731 (min) 0.337978 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610234e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313812 (min) 0.313992 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318256 (min) 0.361292 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:20 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:20 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:20 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:20 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:20 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:20 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:20 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:20 DEBUG   opendrift.models.basemodel:2057:               -3.330947969687013e-20 <- latitude  -> 8.991669947334122e-06
12:55:20 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7960632503318307e-05
12:55:20 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:20 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086274e-12 degrees.
12:55:20 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:55:20 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:55:20 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:55:20 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313894 (min) 0.314127 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318233 (min) 0.361334 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:20 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:20 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:20 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:20 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:20 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45563520107557e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314101 (min) 0.314103 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32287 (min) 0.384045 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080925e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314152 (min) 0.314095 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322875 (min) 0.383678 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080928e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314004 (min) 0.313972 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328598 (min) 0.404112 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:20 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:20 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:20 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:20 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:20 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:20 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:20 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:20 DEBUG   opendrift.models.basemodel:2057:               -1.4218693573638543e-20 <- latitude  -> 8.9918314395308e-06
12:55:20 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7964225705800522e-05
12:55:20 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:20 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075577e-12 degrees.
12:55:20 DEBUG   opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
12:55:20 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 1 elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 1 elements
12:55:20 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 1 elements
12:55:20 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313898 (min) 0.313979 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328503 (min) 0.404493 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:20 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:20 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:20 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:20 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:20 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572905e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314055 (min) 0.314063 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33483 (min) 0.42364 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075587e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31409 (min) 0.314056 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334901 (min) 0.423227 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075587e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314141 (min) 0.314145 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340865 (min) 0.438851 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:20 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:20 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:20 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:20 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:20 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:20 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:20 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:20 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992205475319733e-06
12:55:20 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796816768830411e-05
12:55:20 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:20 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070234e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31393 (min) 0.31405 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340828 (min) 0.438386 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:20 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:20 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:20 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:20 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:20 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45128894808096e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314146 (min) 0.314123 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346139 (min) 0.451485 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080962e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314116 (min) 0.314118 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345997 (min) 0.450858 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080962e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313737 (min) 0.313886 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350428 (min) 0.460123 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:20 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:20 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:20 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:20 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:20 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:20 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:20 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:20 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992277878289033e-06
12:55:20 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7970102912989168e-05
12:55:20 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:20 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583652e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314144 (min) 0.313681 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350464 (min) 0.462162 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:20 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:20 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:20 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:20 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:20 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589019e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314144 (min) 0.314137 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353117 (min) 0.466455 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583663e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314127 (min) 0.314147 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353046 (min) 0.465481 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086342e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314103 (min) 0.31415 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353971 (min) 0.467324 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:20 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:20 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:20 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:20 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:20 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:20 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:20 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:20 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992157921859972e-06
12:55:20 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7970987727913686e-05
12:55:20 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:20 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44476956858903e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314098 (min) 0.314126 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353716 (min) 0.469961 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:20 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:20 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:20 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:20 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:20 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599765e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314091 (min) 0.313728 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352872 (min) 0.467633 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605124e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31408 (min) 0.313729 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352934 (min) 0.467503 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107153e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314074 (min) 0.313852 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350388 (min) 0.461747 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:20 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:20 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:20 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:20 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:20 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:20 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:20 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:20 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:20 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.99190072154126e-06
12:55:20 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7973500402870933e-05
12:55:20 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:20 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615856e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314142 (min) 0.314109 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350287 (min) 0.462843 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:20 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:20 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:20 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:20 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:20 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:20 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626592e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314112 (min) 0.314101 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345996 (min) 0.45302 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:20 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:20 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:20 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:20 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:20 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:20 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129276e-12 degrees.
12:55:20 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:20 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:20 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314118 (min) 0.31413 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346047 (min) 0.453185 (max)
12:55:20 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631951e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313879 (min) 0.313913 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340759 (min) 0.440331 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:21 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:21 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:21 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:21 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:21 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:21 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:21 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:21 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:21 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:21 DEBUG   opendrift.models.basemodel:2057:               -1.3607177504455831e-21 <- latitude  -> 8.991504079891547e-06
12:55:21 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.79753025320873e-05
12:55:21 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:21 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39696078564805e-12 degrees.
12:55:21 DEBUG   opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
12:55:21 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 1 elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 1 elements
12:55:21 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 1 elements
12:55:21 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314014 (min) 0.314075 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340685 (min) 0.440723 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:21 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:21 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:21 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:21 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:21 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:21 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:21 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139826e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313836 (min) 0.314123 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334724 (min) 0.424776 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145183e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313811 (min) 0.314153 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334707 (min) 0.424723 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642505e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314093 (min) 0.313939 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328513 (min) 0.406002 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:21 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:21 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:21 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:21 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:21 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:21 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:21 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:21 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:21 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:21 DEBUG   opendrift.models.basemodel:2057:               -8.432218003148217e-21 <- latitude  -> 8.991277642570188e-06
12:55:21 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976335413702243e-05
12:55:21 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:21 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118393e-12 degrees.
12:55:21 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:21 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:21 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:21 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314077 (min) 0.314158 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328518 (min) 0.405317 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:21 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:21 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:21 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:21 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:21 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:21 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:21 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43607706259964e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314151 (min) 0.313925 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322745 (min) 0.383419 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610232e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314148 (min) 0.313957 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322739 (min) 0.383571 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610232e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31379 (min) 0.313832 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31806 (min) 0.360976 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:21 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:21 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:21 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:21 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:21 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:21 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:21 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:21 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:21 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:21 DEBUG   opendrift.models.basemodel:2057:               -1.5307816348562033e-20 <- latitude  -> 8.991871291822434e-06
12:55:21 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797634978100197e-05
12:55:21 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:21 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075528e-12 degrees.
12:55:21 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:21 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:21 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:21 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313716 (min) 0.313975 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318082 (min) 0.362183 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:21 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:21 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:21 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:21 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:21 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:21 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:21 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059454e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313833 (min) 0.314117 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31503 (min) 0.338403 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562135e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313806 (min) 0.314077 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31504 (min) 0.338445 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562136e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313966 (min) 0.314129 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314154 (min) 0.314012 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:21 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:21 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:21 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:21 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:21 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:21 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:21 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:21 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:21 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:21 DEBUG   opendrift.models.basemodel:2057:               -2.2311706226888208e-20 <- latitude  -> 8.992169023754414e-06
12:55:21 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7979567936088825e-05
12:55:21 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:21 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546062e-12 degrees.
12:55:21 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:21 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:21 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:21 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313865 (min) 0.314073 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313734 (min) 0.31378 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:21 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:21 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:21 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:21 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:21 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:21 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:21 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038025e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313586 (min) 0.31382 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315121 (min) 0.3388 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038025e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31355 (min) 0.313786 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315059 (min) 0.338656 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043385e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314088 (min) 0.31361 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31813 (min) 0.362448 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:21 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:21 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:21 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:21 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:21 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:21 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:21 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:04.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:21 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:21 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:21 DEBUG   opendrift.models.basemodel:2057:               -2.8716450075153425e-20 <- latitude  -> 8.992096779518266e-06
12:55:21 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7981424993153967e-05
12:55:21 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:21 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529993e-12 degrees.
12:55:21 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:21 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:21 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:21 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313944 (min) 0.31407 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318137 (min) 0.362026 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:21 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:21 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:21 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:21 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:21 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:21 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:21 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519278e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314085 (min) 0.313906 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322761 (min) 0.384917 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.496924604524636e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314089 (min) 0.314031 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322754 (min) 0.385134 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519278e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314097 (min) 0.314136 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328574 (min) 0.406099 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:21 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:21 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:21 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:21 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:21 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:21 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:21 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:04 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:21 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:21 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:21 DEBUG   opendrift.models.basemodel:2057:               -3.341599840234859e-20 <- latitude  -> 8.991758417343597e-06
12:55:21 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7981742431590716e-05
12:55:21 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:21 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.503443984016603e-12 degrees.
12:55:21 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:21 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:21 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:21 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314037 (min) 0.313787 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328522 (min) 0.406377 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:21 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:21 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:21 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:21 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:21 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:21 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:21 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519293e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31409 (min) 0.313557 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334707 (min) 0.424967 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49692460452465e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314134 (min) 0.313866 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33469 (min) 0.424825 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49692460452465e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314083 (min) 0.314055 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340677 (min) 0.440735 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:21 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:21 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:21 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:21 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:21 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:21 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:21 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:21 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:04
12:55:21 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:21 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:21 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:21 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:21 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:21 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:21 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:21 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:21 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:21 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:21 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:21 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:21 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:21 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:21 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:21 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:21 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:21 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:21 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:21 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:21 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:21 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:16 to 2000-01-01 00:00:04)
12:55:21 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:21 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:21 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:21 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:21 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:21 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:21 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:21 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:21 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:21 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:21 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:21 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:21 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:21 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:21 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314091 (min) 0.314123 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328313 (min) 0.40584 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:21 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:21 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:21 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:21 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:21 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:21 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:21 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:21 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610408e-12 degrees.
12:55:21 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:21 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:21 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31401 (min) 0.314157 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322618 (min) 0.384752 (max)
12:55:21 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:21 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:21 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:21 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:21 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:21 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:21 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118448e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314079 (min) 0.314132 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322622 (min) 0.384749 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615769e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314018 (min) 0.314144 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317981 (min) 0.361942 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:22 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:22 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:22 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:22 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:22 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:22 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:22 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:22 DEBUG   opendrift.models.basemodel:2057:               -3.790637540155806e-20 <- latitude  -> 8.888031939261095e-06
12:55:22 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.786572345002992e-05
12:55:22 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:22 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4984 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605062e-12 degrees.
12:55:22 DEBUG   opendrift.readers.basereader.variables:829: Masking 16 elements outside coverage
12:55:22 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 16 elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 16 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 16 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314108 (min) 0.314099 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317973 (min) 0.361956 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:22 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:22 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:22 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:22 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:22 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102395e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313984 (min) 0.314068 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314935 (min) 0.3377 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430112467e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313957 (min) 0.314139 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315002 (min) 0.337832 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42738455661044e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314096 (min) 0.314158 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314007 (min) 0.314401 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:22 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:22 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:22 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:22 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:22 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:22 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:22 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:22 DEBUG   opendrift.models.basemodel:2057:               -4.6205993375153e-20 <- latitude  -> 8.930206451818048e-06
12:55:22 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7911513185493255e-05
12:55:22 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:22 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4970 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42955768310778e-12 degrees.
12:55:22 DEBUG   opendrift.readers.basereader.variables:829: Masking 30 elements outside coverage
12:55:22 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 30 elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 30 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 30 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314086 (min) 0.313911 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314085 (min) 0.314589 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:22 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:22 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:22 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:22 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:22 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123878e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313996 (min) 0.313751 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315049 (min) 0.338509 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631922e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314031 (min) 0.313976 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314997 (min) 0.33882 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631927e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314071 (min) 0.31393 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318138 (min) 0.362398 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:22 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:22 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:22 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:22 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:22 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:22 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:22 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:22 DEBUG   opendrift.models.basemodel:2057:               -5.363989280371874e-20 <- latitude  -> 8.954836132418883e-06
12:55:22 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7943500035237694e-05
12:55:22 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:22 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4953 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145353e-12 degrees.
12:55:22 DEBUG   opendrift.readers.basereader.variables:829: Masking 47 elements outside coverage
12:55:22 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 47 elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 47 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 47 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314151 (min) 0.314108 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318216 (min) 0.362752 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:22 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:22 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:22 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:22 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:22 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37522952067487e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314155 (min) 0.314115 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322824 (min) 0.385356 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690964e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.314159 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322904 (min) 0.385452 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696325e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313995 (min) 0.314017 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328709 (min) 0.406219 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:22 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:22 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:22 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:22 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:22 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:22 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:22 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:22 DEBUG   opendrift.models.basemodel:2057:               -5.942033051599942e-20 <- latitude  -> 8.969803550709557e-06
12:55:22 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7963263893756223e-05
12:55:22 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:22 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4937 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32524761123593e-12 degrees.
12:55:22 DEBUG   opendrift.readers.basereader.variables:829: Masking 63 elements outside coverage
12:55:22 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 63 elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 63 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 63 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314072 (min) 0.313757 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328637 (min) 0.403986 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:22 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:22 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:22 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:22 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:22 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195809e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313682 (min) 0.313951 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334926 (min) 0.422298 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.244841930835187e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313834 (min) 0.314057 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.335006 (min) 0.423924 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057332516e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313914 (min) 0.313792 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341002 (min) 0.439771 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:22 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:22 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:22 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:22 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:22 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:22 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:22 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:22 DEBUG   opendrift.models.basemodel:2057:               -6.308919330291943e-20 <- latitude  -> 8.979340243679973e-06
12:55:22 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7973732347883656e-05
12:55:22 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:22 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4925 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.166609376932393e-12 degrees.
12:55:22 DEBUG   opendrift.readers.basereader.variables:829: Masking 75 elements outside coverage
12:55:22 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 75 elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 75 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 75 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313349 (min) 0.313449 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34103 (min) 0.434206 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:22 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:22 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:22 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:22 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:22 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.201379400889177e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314132 (min) 0.312592 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346314 (min) 0.448846 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.157916870942801e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314126 (min) 0.312534 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346264 (min) 0.447304 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.160089997440129e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313773 (min) 0.312949 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350315 (min) 0.456471 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:22 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:22 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:22 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:22 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:22 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:22 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:22 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:22 DEBUG   opendrift.models.basemodel:2057:               -5.68610861685299e-20 <- latitude  -> 8.98495824596177e-06
12:55:22 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977787878801572e-05
12:55:22 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:22 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4918 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.223110665862352e-12 degrees.
12:55:22 DEBUG   opendrift.readers.basereader.variables:829: Masking 82 elements outside coverage
12:55:22 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 82 elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 82 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 82 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313325 (min) 0.314107 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350329 (min) 0.455343 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:22 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:22 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:22 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:22 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:22 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.26874632230608e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314155 (min) 0.31358 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352824 (min) 0.467031 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.229630045354315e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.313498 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352935 (min) 0.466407 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.238322551343572e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314143 (min) 0.313483 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353669 (min) 0.468179 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:22 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:22 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:22 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:22 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:22 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:22 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:22 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:22 DEBUG   opendrift.models.basemodel:2057:               -6.288788147111508e-20 <- latitude  -> 8.98852599176099e-06
12:55:22 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.79770566480565e-05
12:55:22 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:22 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4913 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.296996966771235e-12 degrees.
12:55:22 DEBUG   opendrift.readers.basereader.variables:829: Masking 87 elements outside coverage
12:55:22 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 87 elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 87 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 87 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313868 (min) 0.313979 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353993 (min) 0.467602 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:22 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:22 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:22 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:22 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:22 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.333940117225687e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313908 (min) 0.31412 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352955 (min) 0.46572 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.299170093268566e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313866 (min) 0.314118 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352897 (min) 0.46541 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.30786259925717e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313785 (min) 0.314033 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350085 (min) 0.459669 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:22 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:22 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:22 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:22 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:22 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:22 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:22 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:22 DEBUG   opendrift.models.basemodel:2057:               -5.807032067419164e-20 <- latitude  -> 8.990319792927784e-06
12:55:22 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7971134283761344e-05
12:55:22 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:22 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4912 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209566e-12 degrees.
12:55:22 DEBUG   opendrift.readers.basereader.variables:829: Masking 88 elements outside coverage
12:55:22 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 88 elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 88 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 88 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313992 (min) 0.31397 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350314 (min) 0.460059 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:22 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:22 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:22 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:22 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:22 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172038e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313735 (min) 0.313965 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345993 (min) 0.451278 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701513e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313915 (min) 0.313939 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345999 (min) 0.450719 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696155e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313974 (min) 0.31387 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340631 (min) 0.437999 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:22 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:22 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:22 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:22 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:22 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:22 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:22 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:22 DEBUG   opendrift.models.basemodel:2057:               -5.587893692991793e-20 <- latitude  -> 8.990892449319203e-06
12:55:22 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7957698757410916e-05
12:55:22 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:22 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4930 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39044140615599e-12 degrees.
12:55:22 DEBUG   opendrift.readers.basereader.variables:829: Masking 70 elements outside coverage
12:55:22 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 70 elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 70 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 70 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314113 (min) 0.314086 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340705 (min) 0.438717 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:22 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:22 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:22 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:22 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:22 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129161e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31413 (min) 0.313982 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334205 (min) 0.422561 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653276e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314057 (min) 0.313985 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334144 (min) 0.422281 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39696078564792e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314154 (min) 0.313448 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328494 (min) 0.40382 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:22 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:22 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:22 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:22 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:22 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:22 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:22 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:22 DEBUG   opendrift.models.basemodel:2057:               -4.704305703455328e-20 <- latitude  -> 8.990430666842326e-06
12:55:22 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.793718765085759e-05
12:55:22 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:22 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4991 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621146e-12 degrees.
12:55:22 DEBUG   opendrift.readers.basereader.variables:829: Masking 9 elements outside coverage
12:55:22 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 9 elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 9 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 9 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31409 (min) 0.314048 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328452 (min) 0.405014 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:22 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:22 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:22 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:22 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:22 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615738e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313954 (min) 0.3138 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322757 (min) 0.384536 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631892e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313918 (min) 0.313757 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322777 (min) 0.384479 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129216e-12 degrees.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313989 (min) 0.313907 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317986 (min) 0.36183 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:22 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:22 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:22 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:22 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:22 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:22 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:22 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:22 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:22 DEBUG   opendrift.models.basemodel:2057:               -5.873164742954144e-20 <- latitude  -> 8.98929810974547e-06
12:55:22 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.795113231217436e-05
12:55:22 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:22 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43607706259967e-12 degrees.
12:55:22 DEBUG   opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
12:55:22 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 3 elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:22 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:22 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:22 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:22 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 3 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 3 elements
12:55:22 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:22 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313921 (min) 0.314101 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318013 (min) 0.361608 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:22 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:22 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:22 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:22 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:22 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:22 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:22 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:22 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:22 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:22 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:22 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:22 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:22 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086284e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313968 (min) 0.31384 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31504 (min) 0.337311 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594325e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31391 (min) 0.313817 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315055 (min) 0.337545 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091646e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314092 (min) 0.313853 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31414 (min) 0.314152 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:23 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:23 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:23 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:23 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:23 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:23 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:23 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:23 DEBUG   opendrift.models.basemodel:2057:               -3.135617157905855e-20 <- latitude  -> 8.990528374947245e-06
12:55:23 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7959889716437188e-05
12:55:23 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:23 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080944e-12 degrees.
12:55:23 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:55:23 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:55:23 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:55:23 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313686 (min) 0.314144 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313874 (min) 0.314088 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:23 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:23 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:23 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:23 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:23 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583634e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314146 (min) 0.314014 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315154 (min) 0.338395 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588993e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314092 (min) 0.313995 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315199 (min) 0.338112 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821582986e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314066 (min) 0.314078 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318108 (min) 0.361582 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:23 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:23 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:23 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:23 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:23 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:23 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:23 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:23 DEBUG   opendrift.models.basemodel:2057:               -8.795204309873277e-21 <- latitude  -> 8.990982943192235e-06
12:55:23 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796581366160683e-05
12:55:23 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:23 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086327e-12 degrees.
12:55:23 DEBUG   opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
12:55:23 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 1 elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 1 elements
12:55:23 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 1 elements
12:55:23 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314113 (min) 0.314037 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317809 (min) 0.36209 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:23 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:23 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:23 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:23 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:23 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44042331559439e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313716 (min) 0.314047 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322583 (min) 0.384031 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599747e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313694 (min) 0.314035 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322728 (min) 0.384276 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097068e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313963 (min) 0.314043 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328741 (min) 0.404891 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:23 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:23 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:23 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:23 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:23 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:23 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:23 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:23 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.991871458292103e-06
12:55:23 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7968513936342005e-05
12:55:23 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:23 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107806e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313884 (min) 0.314085 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328563 (min) 0.405429 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:23 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:23 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:23 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:23 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:23 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621076e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313917 (min) 0.314152 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334867 (min) 0.42402 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129264e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313971 (min) 0.314151 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334949 (min) 0.424135 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626584e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314077 (min) 0.314105 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340894 (min) 0.439873 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:23 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:23 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:23 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:23 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:23 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:23 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:23 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:23 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992421978586237e-06
12:55:23 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7971809217113726e-05
12:55:23 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:23 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42955768310768e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313924 (min) 0.314136 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341011 (min) 0.439688 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:23 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:23 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:23 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:23 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:23 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091607e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313836 (min) 0.3141 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346301 (min) 0.452112 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599643e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313846 (min) 0.314112 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346266 (min) 0.452366 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189096965e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31415 (min) 0.313991 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350391 (min) 0.461587 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:23 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:23 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:23 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:23 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:23 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:23 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:23 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:23 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992741984006723e-06
12:55:23 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797380368399904e-05
12:55:23 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:23 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080892e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313774 (min) 0.313598 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350485 (min) 0.461623 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:23 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:23 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:23 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:23 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:23 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572856e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314137 (min) 0.314149 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352948 (min) 0.468183 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070174e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314151 (min) 0.314155 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352863 (min) 0.468496 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572853e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314149 (min) 0.314134 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353716 (min) 0.470352 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:23 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:23 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:23 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:23 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:23 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:23 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:23 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:23 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992901497732282e-06
12:55:23 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7974770137163536e-05
12:55:23 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:23 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46867396005946e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314011 (min) 0.314149 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35396 (min) 0.469971 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:23 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:23 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:23 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:23 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:23 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47084708655678e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314128 (min) 0.314141 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353055 (min) 0.467039 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054102e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314144 (min) 0.314128 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353003 (min) 0.466378 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47084708655678e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313963 (min) 0.313983 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350296 (min) 0.46065 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:23 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:23 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:23 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:23 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:23 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:23 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:23 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:23 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992934520448635e-06
12:55:23 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7974994628885307e-05
12:55:23 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:23 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551425e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31407 (min) 0.314101 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.349881 (min) 0.462095 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:23 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:23 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:23 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:23 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:23 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043387e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314062 (min) 0.313763 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346185 (min) 0.452971 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043389e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314072 (min) 0.313823 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34619 (min) 0.453233 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546067e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313954 (min) 0.314076 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340722 (min) 0.440371 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:23 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:23 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:23 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:23 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:23 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:23 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:23 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:23 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992837079840129e-06
12:55:23 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797681075925238e-05
12:55:23 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:23 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038028e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314056 (min) 0.314159 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340589 (min) 0.440714 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:23 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:23 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:23 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:23 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:23 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535354e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314101 (min) 0.313661 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334695 (min) 0.424223 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535356e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314116 (min) 0.313857 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334731 (min) 0.424431 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038034e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314045 (min) 0.31402 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328193 (min) 0.405719 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:23 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:23 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:23 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:23 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:23 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:23 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:23 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:23 DEBUG   opendrift.models.basemodel:2057:               -7.936968179516959e-21 <- latitude  -> 8.99257435056318e-06
12:55:23 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7978831388985234e-05
12:55:23 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:23 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032682e-12 degrees.
12:55:23 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:23 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:23 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:23 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313763 (min) 0.314008 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328554 (min) 0.40539 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:23 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:23 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:23 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:23 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:23 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032683e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314034 (min) 0.313847 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322684 (min) 0.38487 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098534708e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313989 (min) 0.313877 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322665 (min) 0.384871 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535365e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31385 (min) 0.313969 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318057 (min) 0.36218 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:23 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:23 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:23 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:23 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:23 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:23 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:23 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:23 DEBUG   opendrift.models.basemodel:2057:               -1.472476286192033e-20 <- latitude  -> 8.992095510754182e-06
12:55:23 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7980206556362828e-05
12:55:23 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:23 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351530013e-12 degrees.
12:55:23 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:23 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:23 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:23 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314041 (min) 0.314015 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317983 (min) 0.362317 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:23 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:23 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:23 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:23 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:23 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351530018e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314067 (min) 0.313459 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315047 (min) 0.338348 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032698e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314054 (min) 0.313807 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315118 (min) 0.338407 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535377e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313639 (min) 0.313984 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314099 (min) 0.313888 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:23 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:23 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:23 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:23 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:23 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:23 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:23 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:23 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:23 DEBUG   opendrift.models.basemodel:2057:               -2.1995582252838882e-20 <- latitude  -> 8.99134810665917e-06
12:55:23 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7980641243484284e-05
12:55:23 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:23 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038067e-12 degrees.
12:55:23 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:23 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:23 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:23 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314014 (min) 0.314017 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313872 (min) 0.31421 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:23 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:23 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:23 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:23 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:23 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:23 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043435e-12 degrees.
12:55:23 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:23 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:23 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313942 (min) 0.314005 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315211 (min) 0.338723 (max)
12:55:23 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:23 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:23 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:23 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:23 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:23 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:23 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:23 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546122e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313939 (min) 0.314075 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315228 (min) 0.338825 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043442e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314127 (min) 0.314009 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31808 (min) 0.362702 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:24 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:24 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:24 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:24 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:24 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:24 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:24 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:04.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:24 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:24 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:24 DEBUG   opendrift.models.basemodel:2057:               -2.8439315651400846e-20 <- latitude  -> 8.990304476078551e-06
12:55:24 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797961477574813e-05
12:55:24 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:24 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054144e-12 degrees.
12:55:24 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:24 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:24 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:24 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313976 (min) 0.313936 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318229 (min) 0.361507 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:24 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:24 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:24 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:24 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:24 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:24 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:24 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059517e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314121 (min) 0.314123 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322904 (min) 0.384287 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059469e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31412 (min) 0.31412 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32286 (min) 0.384138 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059469e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313953 (min) 0.314146 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328621 (min) 0.404733 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:24 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:24 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:24 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:24 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:24 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:24 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:24 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:24 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:04.500000
12:55:24 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:24 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:24 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:24 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:24 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:24 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:24 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:24 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:24 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:24 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:24 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:24 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:24 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:24 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:24 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:24 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:24 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:24 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:24 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:24 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:24 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:24 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:16.500000 to 2000-01-01 00:00:04.500000)
12:55:24 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:24 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:24 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:24 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:24 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:24 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:24 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:24 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:24 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:24 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:24 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:24 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:24 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:24 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:24 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314134 (min) 0.314158 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340662 (min) 0.440752 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:24 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:24 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:24 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:24 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:24 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:24 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:24 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113087e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314053 (min) 0.314159 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334635 (min) 0.424594 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615766e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313984 (min) 0.314144 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334619 (min) 0.42456 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118446e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314048 (min) 0.314092 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328294 (min) 0.405749 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:24 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:24 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:24 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:24 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:24 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:24 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:24 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:24 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:24 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:24 DEBUG   opendrift.models.basemodel:2057:               -3.017070755167498e-20 <- latitude  -> 8.890266268973975e-06
12:55:24 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7857382051185547e-05
12:55:24 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:24 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4987 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107736e-12 degrees.
12:55:24 DEBUG   opendrift.readers.basereader.variables:829: Masking 13 elements outside coverage
12:55:24 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 13 elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 13 elements
12:55:24 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 13 elements
12:55:24 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314103 (min) 0.314145 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32836 (min) 0.405821 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:24 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:24 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:24 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:24 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:24 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:24 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:24 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102388e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313768 (min) 0.314057 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322735 (min) 0.384403 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610431e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313897 (min) 0.314126 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322724 (min) 0.384492 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113108e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314061 (min) 0.314153 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318002 (min) 0.3617 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:24 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:24 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:24 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:24 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:24 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:24 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:24 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:24 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:24 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:24 DEBUG   opendrift.models.basemodel:2057:               -3.8742427087214195e-20 <- latitude  -> 8.93251245783293e-06
12:55:24 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.789971669962462e-05
12:55:24 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:24 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4974 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605086e-12 degrees.
12:55:24 DEBUG   opendrift.readers.basereader.variables:829: Masking 26 elements outside coverage
12:55:24 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 26 elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 26 elements
12:55:24 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 26 elements
12:55:24 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31384 (min) 0.3141 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317759 (min) 0.361893 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:24 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:24 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:24 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:24 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:24 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:24 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:24 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42521143011314e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314088 (min) 0.314135 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31515 (min) 0.337852 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615829e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314117 (min) 0.314077 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31513 (min) 0.337928 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711851e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314136 (min) 0.314142 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314079 (min) 0.314596 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:24 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:24 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:24 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:24 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:24 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:24 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:24 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:24 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:24 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:24 DEBUG   opendrift.models.basemodel:2057:               -4.654872840818302e-20 <- latitude  -> 8.956179033407645e-06
12:55:24 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.793245876114482e-05
12:55:24 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:24 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4958 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41434579762657e-12 degrees.
12:55:24 DEBUG   opendrift.readers.basereader.variables:829: Masking 42 elements outside coverage
12:55:24 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 42 elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 42 elements
12:55:24 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 42 elements
12:55:24 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314159 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314142 (min) 0.31453 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:24 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:24 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:24 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:24 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:24 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:24 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:24 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785648037e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314081 (min) 0.314008 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315248 (min) 0.338861 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.388268279658761e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314103 (min) 0.313882 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315229 (min) 0.338429 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.386095153161445e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313941 (min) 0.313808 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31821 (min) 0.36205 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:24 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:24 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:24 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:24 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:24 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:24 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:24 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:24 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:24 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:24 DEBUG   opendrift.models.basemodel:2057:               -5.3748843000353443e-20 <- latitude  -> 8.970316916414487e-06
12:55:24 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7955235763575736e-05
12:55:24 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:24 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4941 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36219076169096e-12 degrees.
12:55:24 DEBUG   opendrift.readers.basereader.variables:829: Masking 59 elements outside coverage
12:55:24 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 59 elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 59 elements
12:55:24 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 59 elements
12:55:24 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313602 (min) 0.314158 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31811 (min) 0.362865 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:24 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:24 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:24 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:24 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:24 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:24 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:24 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32742073773389e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313846 (min) 0.312852 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322945 (min) 0.383226 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755349e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313837 (min) 0.312626 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323033 (min) 0.384089 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472760714e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31386 (min) 0.313959 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328801 (min) 0.40488 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:24 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:24 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:24 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:24 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:24 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:24 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:24 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:24 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:24 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:24 DEBUG   opendrift.models.basemodel:2057:               -5.937362750906626e-20 <- latitude  -> 8.9790110496258e-06
12:55:24 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796910728256902e-05
12:55:24 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:24 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4927 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.260053816316417e-12 degrees.
12:55:24 DEBUG   opendrift.readers.basereader.variables:829: Masking 73 elements outside coverage
12:55:24 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 73 elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 73 elements
12:55:24 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 73 elements
12:55:24 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312705 (min) 0.312262 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328669 (min) 0.404769 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:24 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:24 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:24 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:24 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:24 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:24 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:24 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.179648135915665e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313919 (min) 0.31385 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334815 (min) 0.415762 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.155743744445173e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313908 (min) 0.313657 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334922 (min) 0.419441 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.15139749145117e-12 degrees.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314029 (min) 0.313161 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341021 (min) 0.435306 (max)
12:55:24 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:24 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:24 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:24 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:24 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:24 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:24 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:24 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:24 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:24 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:24 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:24 DEBUG   opendrift.models.basemodel:2057:               -6.369718601871578e-20 <- latitude  -> 8.98466463106953e-06
12:55:24 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976040062125155e-05
12:55:24 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:24 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4917 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.164436250434746e-12 degrees.
12:55:24 DEBUG   opendrift.readers.basereader.variables:829: Masking 83 elements outside coverage
12:55:24 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 83 elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:24 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:24 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:24 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:24 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:24 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:24 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:24 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:24 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:24 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 83 elements
12:55:24 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 83 elements
12:55:24 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:24 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313157 (min) 0.313698 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340874 (min) 0.436263 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:25 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:25 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:25 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:25 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:25 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.216591286370406e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313988 (min) 0.314064 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34624 (min) 0.442671 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.177475009418614e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314019 (min) 0.313992 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346271 (min) 0.445761 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.18399438891061e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314063 (min) 0.313919 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35052 (min) 0.455247 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:25 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:25 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:25 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:25 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:25 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:25 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:25 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:25 DEBUG   opendrift.models.basemodel:2057:               -5.635691955566939e-20 <- latitude  -> 8.987481789761507e-06
12:55:25 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977812282783544e-05
12:55:25 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:25 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4912 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057332894e-12 degrees.
12:55:25 DEBUG   opendrift.readers.basereader.variables:829: Masking 88 elements outside coverage
12:55:25 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 88 elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 88 elements
12:55:25 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 88 elements
12:55:25 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313953 (min) 0.313698 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350276 (min) 0.460639 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:25 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:25 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:25 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:25 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:25 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29482384027389e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31379 (min) 0.313975 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352712 (min) 0.465263 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.260053816316769e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313914 (min) 0.314019 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352707 (min) 0.464401 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195808736e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313872 (min) 0.314059 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353447 (min) 0.466117 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:25 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:25 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:25 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:25 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:25 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:25 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:25 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:25 DEBUG   opendrift.models.basemodel:2057:               -5.720095505955008e-20 <- latitude  -> 8.988825270999073e-06
12:55:25 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797486531352469e-05
12:55:25 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:25 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4909 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.318728231744427e-12 degrees.
12:55:25 DEBUG   opendrift.readers.basereader.variables:829: Masking 91 elements outside coverage
12:55:25 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 91 elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 91 elements
12:55:25 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 91 elements
12:55:25 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313764 (min) 0.314136 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353169 (min) 0.467211 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:25 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:25 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:25 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:25 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:25 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.3534982557009e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314097 (min) 0.314159 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352326 (min) 0.466159 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.329593864231029e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31398 (min) 0.314157 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352448 (min) 0.46553 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728353e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314114 (min) 0.314154 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350168 (min) 0.45979 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:25 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:25 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:25 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:25 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:25 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:25 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:25 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:25 DEBUG   opendrift.models.basemodel:2057:               -5.697238965994496e-20 <- latitude  -> 8.988774191072987e-06
12:55:25 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7965628770671158e-05
12:55:25 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:25 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4908 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680099e-12 degrees.
12:55:25 DEBUG   opendrift.readers.basereader.variables:829: Masking 92 elements outside coverage
12:55:25 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 92 elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 92 elements
12:55:25 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 92 elements
12:55:25 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314146 (min) 0.314088 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350283 (min) 0.460881 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:25 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:25 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:25 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:25 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:25 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145238e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314086 (min) 0.313538 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346102 (min) 0.451423 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674717e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314084 (min) 0.313545 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346063 (min) 0.45091 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166676e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314038 (min) 0.313918 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340611 (min) 0.438169 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:25 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:25 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:25 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:25 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:25 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:25 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:25 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:25 DEBUG   opendrift.models.basemodel:2057:               -5.519720332701901e-20 <- latitude  -> 8.98806884268995e-06
12:55:25 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.794637892600667e-05
12:55:25 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:25 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4922 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631867e-12 degrees.
12:55:25 DEBUG   opendrift.readers.basereader.variables:829: Masking 78 elements outside coverage
12:55:25 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 78 elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 78 elements
12:55:25 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 78 elements
12:55:25 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314053 (min) 0.313879 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34076 (min) 0.439361 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:25 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:25 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:25 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:25 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:25 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615745e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314042 (min) 0.314035 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334205 (min) 0.42169 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637178e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314028 (min) 0.314054 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334199 (min) 0.422071 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631822e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314024 (min) 0.313912 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328492 (min) 0.40357 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:25 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:25 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:25 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:25 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:25 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:25 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:25 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:25 DEBUG   opendrift.models.basemodel:2057:               -4.924765215597014e-20 <- latitude  -> 8.987831603258778e-06
12:55:25 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7945409829803227e-05
12:55:25 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:25 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599684e-12 degrees.
12:55:25 DEBUG   opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
12:55:25 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 5 elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 5 elements
12:55:25 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 5 elements
12:55:25 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313876 (min) 0.314031 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328386 (min) 0.404125 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:25 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:25 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:25 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:25 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:25 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588982e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313997 (min) 0.313881 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322623 (min) 0.382747 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599705e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313927 (min) 0.313859 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322556 (min) 0.382865 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189096373e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314012 (min) 0.31407 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317912 (min) 0.360367 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:25 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:25 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:25 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:25 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:25 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:25 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:25 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:25 DEBUG   opendrift.models.basemodel:2057:               -2.815168979420419e-20 <- latitude  -> 8.990068915888733e-06
12:55:25 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.795709755179698e-05
12:55:25 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:25 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091682e-12 degrees.
12:55:25 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:55:25 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:55:25 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:55:25 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313807 (min) 0.314093 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318109 (min) 0.361373 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:25 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:25 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:25 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:25 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:25 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097066e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314027 (min) 0.313849 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31498 (min) 0.337977 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605103e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314033 (min) 0.313841 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315032 (min) 0.337901 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605104e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313987 (min) 0.313996 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314157 (min) 0.314313 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:25 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:25 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:25 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:25 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:25 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:25 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:25 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:25 DEBUG   opendrift.models.basemodel:2057:               -4.42283995587016e-21 <- latitude  -> 8.991291110529523e-06
12:55:25 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7964863380806264e-05
12:55:25 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:25 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605002e-12 degrees.
12:55:25 DEBUG   opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
12:55:25 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 1 elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 1 elements
12:55:25 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 1 elements
12:55:25 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314009 (min) 0.314031 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314105 (min) 0.314437 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:25 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:25 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:25 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:25 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:25 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080892e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313942 (min) 0.313698 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315117 (min) 0.338725 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44476956858893e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31401 (min) 0.313677 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315015 (min) 0.338711 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086251e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313988 (min) 0.314009 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318218 (min) 0.362338 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:25 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:25 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:25 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:25 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:25 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:25 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:25 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:25 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.991836580982862e-06
12:55:25 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7969901496170523e-05
12:55:25 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:25 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46432770706482e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314019 (min) 0.314129 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318086 (min) 0.362295 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:25 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:25 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:25 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:25 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:25 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556784e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314072 (min) 0.314085 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322863 (min) 0.384387 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059466e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314003 (min) 0.314092 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322753 (min) 0.384373 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054107e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314137 (min) 0.314073 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328633 (min) 0.404943 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:25 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:25 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:25 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:25 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:25 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:25 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:25 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:25 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.991912685836762e-06
12:55:25 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7972667831569576e-05
12:55:25 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:25 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048752e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314009 (min) 0.313888 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328637 (min) 0.405875 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:25 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:25 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:25 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:25 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:25 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043397e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314019 (min) 0.314102 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334835 (min) 0.42254 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043398e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314045 (min) 0.314112 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334845 (min) 0.423613 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043397e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314129 (min) 0.313728 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3409 (min) 0.439422 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:25 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:25 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:25 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:25 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:25 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:25 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:25 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:25 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.991668910987048e-06
12:55:25 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7973371391195767e-05
12:55:25 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:25 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043405e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314014 (min) 0.31409 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340971 (min) 0.440677 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:25 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:25 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:25 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:25 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:25 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038049e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313941 (min) 0.314076 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346225 (min) 0.45259 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540726e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313869 (min) 0.314131 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346002 (min) 0.451721 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540728e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31371 (min) 0.31412 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350304 (min) 0.461016 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:25 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:25 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:25 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:25 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:25 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:25 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:25 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:25 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:25 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.991209123025531e-06
12:55:25 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797594410195843e-05
12:55:25 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:25 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540732e-12 degrees.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:25 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:25 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:25 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:25 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313984 (min) 0.31412 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350289 (min) 0.461926 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:25 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:25 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:25 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:25 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:25 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:25 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:25 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:25 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:25 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:25 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:25 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:25 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:25 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:25 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540734e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314111 (min) 0.314037 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353019 (min) 0.466458 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540736e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314045 (min) 0.31401 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352949 (min) 0.466583 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540736e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314007 (min) 0.314017 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353914 (min) 0.468492 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:26 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:26 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:26 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:26 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:26 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:26 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:26 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:26 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:26 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:26 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.991313905665652e-06
12:55:26 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977611370435157e-05
12:55:26 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:26 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043416e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314012 (min) 0.31405 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353948 (min) 0.469567 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:26 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:26 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:26 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:26 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:26 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:26 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:26 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043426e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314082 (min) 0.314098 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352885 (min) 0.467607 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043429e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31409 (min) 0.314087 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352995 (min) 0.46731 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043427e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31411 (min) 0.313928 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350361 (min) 0.461579 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:26 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:26 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:26 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:26 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:26 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:26 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:26 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:26 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:26 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:26 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992151905813989e-06
12:55:26 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797871066860484e-05
12:55:26 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:26 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048793e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314152 (min) 0.31415 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350372 (min) 0.461855 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:26 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:26 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:26 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:26 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:26 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:26 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:26 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551478e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314139 (min) 0.313983 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346057 (min) 0.452109 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47519333955148e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314148 (min) 0.313988 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345946 (min) 0.451658 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47302021305416e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314149 (min) 0.314016 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340607 (min) 0.438913 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:26 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:26 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:26 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:26 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:26 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:26 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:26 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:26 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:26 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:26 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992620139865322e-06
12:55:26 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797935191183965e-05
12:55:26 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:26 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059527e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314047 (min) 0.313936 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340745 (min) 0.439259 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:26 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:26 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:26 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:26 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:26 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:26 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:26 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064896e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313428 (min) 0.313932 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334768 (min) 0.424246 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4643277070649e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313503 (min) 0.314108 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334762 (min) 0.424333 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4643277070649e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313949 (min) 0.313882 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328458 (min) 0.405657 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:26 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:26 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:26 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:26 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:26 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:26 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:26 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:26 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:26 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:26 DEBUG   opendrift.models.basemodel:2057:               -7.334812808974958e-21 <- latitude  -> 8.9928671988996e-06
12:55:26 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7979425065426323e-05
12:55:26 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:26 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075595e-12 degrees.
12:55:26 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:26 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:26 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:26 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314054 (min) 0.314102 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328178 (min) 0.405615 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:26 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:26 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:26 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:26 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:26 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:26 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:26 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578281e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314061 (min) 0.314125 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322702 (min) 0.384944 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578228e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31405 (min) 0.31409 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322642 (min) 0.384954 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578228e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314135 (min) 0.313926 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318006 (min) 0.362207 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:26 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:26 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:26 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:26 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:26 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:26 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:26 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:26 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:26 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:26 DEBUG   opendrift.models.basemodel:2057:               -1.4533588114819324e-20 <- latitude  -> 8.992977461818767e-06
12:55:26 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797857560590776e-05
12:55:26 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:26 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567513e-12 degrees.
12:55:26 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:26 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:26 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:26 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314051 (min) 0.313965 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318093 (min) 0.362255 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:26 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:26 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:26 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:26 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:26 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:26 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:26 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562167e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314154 (min) 0.313966 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315022 (min) 0.337918 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064847e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314157 (min) 0.314023 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315036 (min) 0.337805 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567525e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314092 (min) 0.314148 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313995 (min) 0.313951 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:26 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:26 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:26 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:26 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:26 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:26 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:26 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:26 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:26 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:26 DEBUG   opendrift.models.basemodel:2057:               -2.1828163327418135e-20 <- latitude  -> 8.992993380796009e-06
12:55:26 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7980455420742544e-05
12:55:26 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:26 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059495e-12 degrees.
12:55:26 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:26 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:26 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:26 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31414 (min) 0.313969 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313841 (min) 0.313758 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:26 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:26 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:26 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:26 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:26 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:26 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:26 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46867396005951e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313806 (min) 0.3141 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315048 (min) 0.338745 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556836e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313844 (min) 0.314155 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315108 (min) 0.338886 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562195e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314072 (min) 0.314065 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318136 (min) 0.362765 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:26 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:26 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:26 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:26 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:26 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:26 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:26 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:26 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:05
12:55:26 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:26 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:26 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:26 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:26 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:26 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:26 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:26 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:26 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:26 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:26 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:26 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:26 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:26 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:26 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:26 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:26 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:26 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:26 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:26 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:26 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:26 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:17 to 2000-01-01 00:00:05)
12:55:26 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:26 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:26 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:26 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:26 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:26 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:26 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:26 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:26 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:26 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:26 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:26 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:26 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:26 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:26 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314157 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350327 (min) 0.463286 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:26 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:26 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:26 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:26 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:26 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:26 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:26 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118441e-12 degrees.
12:55:26 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:26 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:26 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313947 (min) 0.314107 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345978 (min) 0.453476 (max)
12:55:26 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:26 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:26 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:26 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:26 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:26 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:26 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:26 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118443e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313973 (min) 0.31414 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345966 (min) 0.453655 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621122e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314153 (min) 0.314151 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340588 (min) 0.440675 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:27 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:27 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:27 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:27 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:27 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:27 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:27 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:27 DEBUG   opendrift.models.basemodel:2057:               -2.4359413589579878e-20 <- latitude  -> 8.89244386407281e-06
12:55:27 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7851023720914843e-05
12:55:27 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:27 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4989 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610413e-12 degrees.
12:55:27 DEBUG   opendrift.readers.basereader.variables:829: Masking 11 elements outside coverage
12:55:27 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 11 elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 11 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 11 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313876 (min) 0.314045 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340592 (min) 0.440458 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:27 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:27 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:27 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:27 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:27 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605065e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.314129 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334333 (min) 0.42461 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107746e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314153 (min) 0.314155 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334396 (min) 0.424577 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610423e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313826 (min) 0.314148 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328275 (min) 0.405766 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:27 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:27 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:27 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:27 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:27 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:27 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:27 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:27 DEBUG   opendrift.models.basemodel:2057:               -3.121374582976859e-20 <- latitude  -> 8.935120864562511e-06
12:55:27 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7889178877041835e-05
12:55:27 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:27 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4979 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107756e-12 degrees.
12:55:27 DEBUG   opendrift.readers.basereader.variables:829: Masking 21 elements outside coverage
12:55:27 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 21 elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 21 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 21 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314145 (min) 0.314154 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328384 (min) 0.405839 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:27 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:27 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:27 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:27 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:27 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42955768310777e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313773 (min) 0.313901 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322707 (min) 0.384769 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42521143011313e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313782 (min) 0.313847 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322721 (min) 0.384768 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615813e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314102 (min) 0.314048 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318087 (min) 0.361961 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:27 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:27 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:27 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:27 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:27 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:27 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:27 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:27 DEBUG   opendrift.models.basemodel:2057:               -3.8087712546549384e-20 <- latitude  -> 8.958536895240385e-06
12:55:27 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7920968949272652e-05
12:55:27 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:27 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4962 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113149e-12 degrees.
12:55:27 DEBUG   opendrift.readers.basereader.variables:829: Masking 38 elements outside coverage
12:55:27 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 38 elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 38 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 38 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313937 (min) 0.313699 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318114 (min) 0.360008 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:27 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:27 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:27 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:27 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:27 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631929e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313725 (min) 0.314153 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315124 (min) 0.336166 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637296e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313704 (min) 0.314112 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315095 (min) 0.33611 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637296e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314016 (min) 0.314039 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313968 (min) 0.314613 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:27 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:27 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:27 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:27 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:27 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:27 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:27 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:27 DEBUG   opendrift.models.basemodel:2057:               -4.6534994056218234e-20 <- latitude  -> 8.97178591737381e-06
12:55:27 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7945509154107197e-05
12:55:27 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:27 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4944 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653405e-12 degrees.
12:55:27 DEBUG   opendrift.readers.basereader.variables:829: Masking 56 elements outside coverage
12:55:27 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 56 elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 56 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 56 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313978 (min) 0.314006 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31403 (min) 0.314044 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:27 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:27 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:27 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:27 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:27 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.368710141182274e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31331 (min) 0.313922 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315086 (min) 0.339179 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.360017635193648e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313295 (min) 0.314077 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315113 (min) 0.33894 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382199012e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314131 (min) 0.31369 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318147 (min) 0.362657 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:27 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:27 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:27 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:27 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:27 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:27 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:27 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:27 DEBUG   opendrift.models.basemodel:2057:               -5.303168045621223e-20 <- latitude  -> 8.979525647149246e-06
12:55:27 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.79624667662074e-05
12:55:27 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:27 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4929 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236575e-12 degrees.
12:55:27 DEBUG   opendrift.readers.basereader.variables:829: Masking 71 elements outside coverage
12:55:27 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 71 elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 71 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 71 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313808 (min) 0.313602 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318359 (min) 0.360738 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:27 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:27 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:27 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:27 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:27 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798281e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31409 (min) 0.313378 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323032 (min) 0.381747 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.25570756332178e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314081 (min) 0.313106 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322914 (min) 0.38359 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.251361310327783e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313477 (min) 0.312742 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328815 (min) 0.404397 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:27 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:27 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:27 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:27 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:27 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:27 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:27 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:27 DEBUG   opendrift.models.basemodel:2057:               -5.89975599296619e-20 <- latitude  -> 8.984786093346062e-06
12:55:27 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7972557067505775e-05
12:55:27 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:27 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4919 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.183994388910935e-12 degrees.
12:55:27 DEBUG   opendrift.readers.basereader.variables:829: Masking 81 elements outside coverage
12:55:27 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 81 elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 81 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 81 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313462 (min) 0.314156 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328611 (min) 0.39953 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:27 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:27 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:27 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:27 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:27 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.155743744445443e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31321 (min) 0.313415 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334981 (min) 0.424175 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.110108088001746e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313156 (min) 0.313401 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334961 (min) 0.423293 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.116627467493713e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313241 (min) 0.313618 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340732 (min) 0.439121 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:27 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:27 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:27 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:27 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:27 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:27 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:27 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:27 DEBUG   opendrift.models.basemodel:2057:               -6.339486669649343e-20 <- latitude  -> 8.987243693737997e-06
12:55:27 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977099764838667e-05
12:55:27 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:27 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4913 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.19268689489986e-12 degrees.
12:55:27 DEBUG   opendrift.readers.basereader.variables:829: Masking 87 elements outside coverage
12:55:27 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 87 elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 87 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 87 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313956 (min) 0.314091 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340551 (min) 0.427258 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:27 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:27 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:27 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:27 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:27 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.249188183830185e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314012 (min) 0.314022 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346219 (min) 0.453715 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.207898780381137e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313974 (min) 0.314077 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346027 (min) 0.453033 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.214418159873067e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313929 (min) 0.314071 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350347 (min) 0.462347 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:27 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:27 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:27 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:27 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:27 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:27 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:27 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:27 DEBUG   opendrift.models.basemodel:2057:               -5.64282744923561e-20 <- latitude  -> 8.989585353919126e-06
12:55:27 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977051728139073e-05
12:55:27 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:27 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4908 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.277438828295337e-12 degrees.
12:55:27 DEBUG   opendrift.readers.basereader.variables:829: Masking 92 elements outside coverage
12:55:27 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 92 elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 92 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 92 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314124 (min) 0.31399 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350413 (min) 0.458494 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:27 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:27 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:27 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:27 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:27 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236391e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314061 (min) 0.313681 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353037 (min) 0.464847 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29482384027391e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314046 (min) 0.313597 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352842 (min) 0.464067 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.296996966771235e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314059 (min) 0.313499 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353778 (min) 0.46577 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:27 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:27 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:27 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:27 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:27 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:27 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:27 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:27 DEBUG   opendrift.models.basemodel:2057:               -5.675620352041702e-20 <- latitude  -> 8.990701973543912e-06
12:55:27 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797187078182594e-05
12:55:27 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:27 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4906 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712271e-12 degrees.
12:55:27 DEBUG   opendrift.readers.basereader.variables:829: Masking 94 elements outside coverage
12:55:27 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 94 elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 94 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 94 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313987 (min) 0.313519 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353338 (min) 0.467286 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:27 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:27 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:27 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:27 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:27 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166705e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314117 (min) 0.31383 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352167 (min) 0.466316 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.349152002706899e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.313705 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35186 (min) 0.465517 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.360017635193505e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314109 (min) 0.31388 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.349867 (min) 0.45978 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:27 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:27 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:27 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:27 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:27 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:27 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:27 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:27 DEBUG   opendrift.models.basemodel:2057:               -5.714946892118793e-20 <- latitude  -> 8.990790280516432e-06
12:55:27 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7958907224925958e-05
12:55:27 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:27 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4906 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653278e-12 degrees.
12:55:27 DEBUG   opendrift.readers.basereader.variables:829: Masking 94 elements outside coverage
12:55:27 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 94 elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 94 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 94 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314152 (min) 0.313594 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350242 (min) 0.460164 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:27 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:27 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:27 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:27 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:27 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129189e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313775 (min) 0.314098 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34587 (min) 0.451702 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150626e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313863 (min) 0.314107 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345993 (min) 0.451277 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647954e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313952 (min) 0.3141 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340741 (min) 0.438542 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:27 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:27 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:27 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:27 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:27 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:27 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:27 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:27 DEBUG   opendrift.models.basemodel:2057:               -4.439505074244428e-20 <- latitude  -> 8.9897393826127e-06
12:55:27 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7936003019565232e-05
12:55:27 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:27 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4917 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118422e-12 degrees.
12:55:27 DEBUG   opendrift.readers.basereader.variables:829: Masking 83 elements outside coverage
12:55:27 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 83 elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 83 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 83 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314052 (min) 0.314048 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340758 (min) 0.439509 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:27 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:27 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:27 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:27 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:27 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44259644209164e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314067 (min) 0.313936 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33447 (min) 0.424131 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42955768310772e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314062 (min) 0.313955 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334397 (min) 0.424057 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102361e-12 degrees.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313943 (min) 0.313707 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328423 (min) 0.405391 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:27 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:27 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:27 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:27 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:27 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:27 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:27 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:27 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:27 DEBUG   opendrift.models.basemodel:2057:               -2.2784174946915288e-20 <- latitude  -> 8.990811801535459e-06
12:55:27 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7952962675816877e-05
12:55:27 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:27 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588982e-12 degrees.
12:55:27 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:55:27 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:27 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:27 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:27 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:27 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:27 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:27 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:27 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:55:27 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:27 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:27 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314012 (min) 0.314067 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328244 (min) 0.405202 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:27 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:27 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:27 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:27 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:27 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:28 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:28 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:28 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086322e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31388 (min) 0.314001 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322642 (min) 0.384129 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594364e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31405 (min) 0.313987 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322705 (min) 0.384037 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091685e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313965 (min) 0.314114 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318103 (min) 0.361504 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:28 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:28 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:28 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:28 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:28 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:28 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:28 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:28 DEBUG   opendrift.models.basemodel:2057:               -1.1062851640794834e-21 <- latitude  -> 8.991674144073233e-06
12:55:28 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7963279083092896e-05
12:55:28 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:28 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091706e-12 degrees.
12:55:28 DEBUG   opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
12:55:28 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 1 elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 1 elements
12:55:28 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 1 elements
12:55:28 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314082 (min) 0.314102 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318166 (min) 0.361631 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:28 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:28 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:28 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:28 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:28 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615851e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313921 (min) 0.314002 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31514 (min) 0.337748 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621219e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314052 (min) 0.314026 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315165 (min) 0.337728 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123892e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313895 (min) 0.314096 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313718 (min) 0.314343 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:28 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:28 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:28 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:28 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:28 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:28 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:28 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:28 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.991931718098313e-06
12:55:28 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7969498680294843e-05
12:55:28 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:28 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113035e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314138 (min) 0.313926 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313972 (min) 0.31439 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:28 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:28 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:28 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:28 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:28 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583565e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314043 (min) 0.314088 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315173 (min) 0.338872 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594284e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313995 (min) 0.314087 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315119 (min) 0.338917 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588925e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314023 (min) 0.314151 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31832 (min) 0.36265 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:28 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:28 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:28 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:28 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:28 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:28 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:28 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:28 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.991751518410098e-06
12:55:28 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797306096700546e-05
12:55:28 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:28 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567495e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313984 (min) 0.314143 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317263 (min) 0.362318 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:28 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:28 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:28 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:28 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:28 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4730202130541e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314146 (min) 0.314138 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322877 (min) 0.384687 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556779e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314156 (min) 0.314136 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322842 (min) 0.38481 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4730202130541e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314152 (min) 0.31398 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328233 (min) 0.405527 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:28 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:28 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:28 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:28 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:28 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:28 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:28 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:28 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.991253738019171e-06
12:55:28 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797426479595991e-05
12:55:28 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:28 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546066e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314086 (min) 0.313909 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328705 (min) 0.404875 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:28 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:28 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:28 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:28 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:28 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038028e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314067 (min) 0.314107 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334785 (min) 0.423368 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043389e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314118 (min) 0.314099 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334751 (min) 0.423021 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540707e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313875 (min) 0.314005 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340577 (min) 0.438605 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:28 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:28 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:28 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:28 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:28 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:28 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:28 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:28 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.990782514049296e-06
12:55:28 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797708959419419e-05
12:55:28 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:28 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535352e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314136 (min) 0.314101 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340984 (min) 0.43893 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:28 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:28 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:28 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:28 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:28 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529993e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31415 (min) 0.313969 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34625 (min) 0.452514 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032674e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314128 (min) 0.314002 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346175 (min) 0.452862 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027313e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314088 (min) 0.313631 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350442 (min) 0.462144 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:28 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:28 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:28 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:28 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:28 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:28 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:28 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:28 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.991577610108295e-06
12:55:28 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7978705136467296e-05
12:55:28 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:28 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529998e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313683 (min) 0.31404 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350256 (min) 0.461516 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:28 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:28 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:28 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:28 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:28 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49257835153e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314072 (min) 0.314006 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353119 (min) 0.467757 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.496924604524637e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314079 (min) 0.31398 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353059 (min) 0.467568 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032679e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314081 (min) 0.314031 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353979 (min) 0.46945 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:28 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:28 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:28 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:28 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:28 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:28 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:28 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:28 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.99212052336864e-06
12:55:28 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797965352985374e-05
12:55:28 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:28 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032682e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31413 (min) 0.31397 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353924 (min) 0.469657 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:28 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:28 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:28 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:28 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:28 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027328e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314132 (min) 0.31408 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352691 (min) 0.467991 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351530006e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314113 (min) 0.314089 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352684 (min) 0.46784 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027328e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314144 (min) 0.314154 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350242 (min) 0.462074 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:28 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:28 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:28 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:28 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:28 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:28 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:28 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:28 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992606922000942e-06
12:55:28 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798016851850232e-05
12:55:28 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:28 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49909773102197e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314012 (min) 0.314148 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35029 (min) 0.462858 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:28 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:28 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:28 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:28 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:28 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351530014e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314034 (min) 0.313824 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346203 (min) 0.453469 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032691e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314023 (min) 0.313821 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346186 (min) 0.45363 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351530016e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313992 (min) 0.31408 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340324 (min) 0.44074 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:28 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:28 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:28 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:28 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:28 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:28 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:28 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:28 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.99287472919848e-06
12:55:28 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.79802787627304e-05
12:55:28 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:28 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49257835153002e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314047 (min) 0.314086 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340555 (min) 0.440621 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:28 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:28 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:28 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:28 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:28 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032703e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31401 (min) 0.313923 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334581 (min) 0.421875 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098534726e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31396 (min) 0.313971 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334546 (min) 0.421444 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535385e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314151 (min) 0.314127 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.327932 (min) 0.403202 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:28 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:28 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:28 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:28 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:28 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:28 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:28 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:28 DEBUG   opendrift.models.basemodel:2057:               -6.989263475174245e-21 <- latitude  -> 8.993018710452196e-06
12:55:28 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797982413608008e-05
12:55:28 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:28 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.48605897203807e-12 degrees.
12:55:28 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:28 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:28 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:28 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313932 (min) 0.314126 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328528 (min) 0.405878 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:28 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:28 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:28 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:28 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:28 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043439e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314077 (min) 0.313706 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322726 (min) 0.384794 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4773664660488e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314067 (min) 0.313511 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322725 (min) 0.384746 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043444e-12 degrees.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314057 (min) 0.314084 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318052 (min) 0.362105 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:28 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:28 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:28 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:28 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:28 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:28 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:28 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:28 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:28 DEBUG   opendrift.models.basemodel:2057:               -1.4395617929515397e-20 <- latitude  -> 8.99308749704527e-06
12:55:28 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7978401136971028e-05
12:55:28 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:28 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043405e-12 degrees.
12:55:28 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:28 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:28 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:28 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:28 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:28 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:28 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:28 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:28 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:28 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:28 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:28 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:28 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:28 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31412 (min) 0.314134 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318187 (min) 0.361851 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:28 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:28 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:28 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:28 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:28 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:29 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:29 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:29 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540731e-12 degrees.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313971 (min) 0.314104 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31466 (min) 0.338421 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47953959254609e-12 degrees.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313942 (min) 0.314043 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314605 (min) 0.338383 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546092e-12 degrees.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314064 (min) 0.313811 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314081 (min) 0.314152 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:29 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:29 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:29 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:29 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:29 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:29 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:29 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:29 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:05.500000
12:55:29 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:29 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:29 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:29 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:29 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:29 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:29 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:29 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:29 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:29 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:29 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:29 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:29 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:29 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:29 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:29 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:29 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:29 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:29 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:29 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:29 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:29 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:17.500000 to 2000-01-01 00:00:05.500000)
12:55:29 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:29 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:29 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:29 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:29 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:29 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:29 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:29 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:29 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:29 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:29 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:29 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:29 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:29 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:29 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31407 (min) 0.314085 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353801 (min) 0.471236 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:29 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:29 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:29 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:29 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:29 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:29 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:29 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615763e-12 degrees.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314156 (min) 0.314075 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35277 (min) 0.468943 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118441e-12 degrees.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314139 (min) 0.314044 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352765 (min) 0.469157 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118441e-12 degrees.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314154 (min) 0.314159 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350196 (min) 0.463276 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:29 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:29 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:29 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:29 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:29 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:29 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:29 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:29 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:29 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:29 DEBUG   opendrift.models.basemodel:2057:               -2.1168559198621123e-20 <- latitude  -> 8.893767138302834e-06
12:55:29 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7847537821127982e-05
12:55:29 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:29 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4990 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610413e-12 degrees.
12:55:29 DEBUG   opendrift.readers.basereader.variables:829: Masking 10 elements outside coverage
12:55:29 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 10 elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 10 elements
12:55:29 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 10 elements
12:55:29 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31399 (min) 0.314083 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350156 (min) 0.463178 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:29 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:29 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:29 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:29 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:29 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:29 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:29 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43173080960506e-12 degrees.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314095 (min) 0.314069 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345968 (min) 0.453051 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43173080960506e-12 degrees.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314154 (min) 0.314117 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34596 (min) 0.453455 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42738455661042e-12 degrees.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313846 (min) 0.314068 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340644 (min) 0.440485 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:29 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:29 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:29 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:29 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:29 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:29 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:29 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:29 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:29 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:29 DEBUG   opendrift.models.basemodel:2057:               -2.4700410286590682e-20 <- latitude  -> 8.93734917212032e-06
12:55:29 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.788177034650696e-05
12:55:29 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:29 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4982 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605072e-12 degrees.
12:55:29 DEBUG   opendrift.readers.basereader.variables:829: Masking 18 elements outside coverage
12:55:29 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 18 elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 18 elements
12:55:29 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 18 elements
12:55:29 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314095 (min) 0.314009 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340329 (min) 0.439734 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:29 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:29 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:29 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:29 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:29 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:29 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:29 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42738455661044e-12 degrees.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313864 (min) 0.314159 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334277 (min) 0.422646 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113121e-12 degrees.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313838 (min) 0.314151 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334389 (min) 0.422982 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107768e-12 degrees.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314159 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328292 (min) 0.404259 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:29 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:29 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:29 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:29 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:29 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:29 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:29 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:29 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:29 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:29 DEBUG   opendrift.models.basemodel:2057:               -3.0593903814415614e-20 <- latitude  -> 8.960828963967035e-06
12:55:29 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.791116611732872e-05
12:55:29 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:29 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4968 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610458e-12 degrees.
12:55:29 DEBUG   opendrift.readers.basereader.variables:829: Masking 32 elements outside coverage
12:55:29 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 32 elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 32 elements
12:55:29 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 32 elements
12:55:29 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313809 (min) 0.314112 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328427 (min) 0.405838 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:29 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:29 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:29 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:29 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:29 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:29 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:29 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118512e-12 degrees.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313984 (min) 0.314132 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32248 (min) 0.384763 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626558e-12 degrees.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313991 (min) 0.314138 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322555 (min) 0.384767 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41651892412388e-12 degrees.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313989 (min) 0.313822 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317944 (min) 0.361959 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:29 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:29 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:29 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:29 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:29 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:29 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:29 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:29 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:29 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:29 DEBUG   opendrift.models.basemodel:2057:               -3.790401480354704e-20 <- latitude  -> 8.97356086179563e-06
12:55:29 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7935640224897203e-05
12:55:29 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:29 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4951 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134614e-12 degrees.
12:55:29 DEBUG   opendrift.readers.basereader.variables:829: Masking 49 elements outside coverage
12:55:29 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 49 elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 49 elements
12:55:29 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 49 elements
12:55:29 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313986 (min) 0.314017 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31789 (min) 0.359254 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:29 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:29 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:29 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:29 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:29 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:29 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:29 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653404e-12 degrees.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313782 (min) 0.314101 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314996 (min) 0.337411 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773669487e-12 degrees.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313734 (min) 0.314147 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314971 (min) 0.337342 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38392202666413e-12 degrees.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313992 (min) 0.313427 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314127 (min) 0.314568 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:29 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:29 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:29 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:29 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:29 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:29 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:29 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:29 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:29 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:29 DEBUG   opendrift.models.basemodel:2057:               -4.675601695661952e-20 <- latitude  -> 8.980890550591392e-06
12:55:29 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7954470355477844e-05
12:55:29 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:29 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4933 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.368710141182928e-12 degrees.
12:55:29 DEBUG   opendrift.readers.basereader.variables:829: Masking 67 elements outside coverage
12:55:29 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 67 elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:29 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:29 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:29 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:29 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:29 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:29 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:29 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:29 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 67 elements
12:55:29 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 67 elements
12:55:29 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:29 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:29 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312943 (min) 0.313551 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314041 (min) 0.314725 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:29 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:29 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:29 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:29 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:29 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:29 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:30 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:30 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:30 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.329593864231205e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314135 (min) 0.314159 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31522 (min) 0.338172 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.316555105246657e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314135 (min) 0.314131 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315194 (min) 0.337483 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.314381978749983e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312963 (min) 0.312663 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318289 (min) 0.361146 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:30 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:30 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:30 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:30 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:30 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:30 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:30 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:30 DEBUG   opendrift.models.basemodel:2057:               -5.307112495432743e-20 <- latitude  -> 8.985459621059478e-06
12:55:30 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7967344879138735e-05
12:55:30 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:30 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4921 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.27309257530032e-12 degrees.
12:55:30 DEBUG   opendrift.readers.basereader.variables:829: Masking 79 elements outside coverage
12:55:30 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 79 elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 79 elements
12:55:30 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 79 elements
12:55:30 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312879 (min) 0.314099 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318307 (min) 0.359674 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:30 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:30 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:30 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:30 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:30 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.207898780381425e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314128 (min) 0.313105 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323013 (min) 0.383048 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.186167515407618e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314125 (min) 0.313239 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322923 (min) 0.382048 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.183994388910304e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313537 (min) 0.314147 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328524 (min) 0.402753 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:30 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:30 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:30 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:30 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:30 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:30 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:30 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:30 DEBUG   opendrift.models.basemodel:2057:               -4.9760209646069386e-20 <- latitude  -> 8.988214318561554e-06
12:55:30 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797471910035685e-05
12:55:30 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:30 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4915 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.123146846985627e-12 degrees.
12:55:30 DEBUG   opendrift.readers.basereader.variables:829: Masking 85 elements outside coverage
12:55:30 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 85 elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 85 elements
12:55:30 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 85 elements
12:55:30 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314004 (min) 0.313723 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328491 (min) 0.406718 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:30 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:30 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:30 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:30 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:30 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.183994388910561e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313951 (min) 0.314008 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334493 (min) 0.411051 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.147051238455518e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313934 (min) 0.314042 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334787 (min) 0.408603 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.153570617948114e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313966 (min) 0.314079 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340835 (min) 0.422124 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:30 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:30 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:30 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:30 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:30 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:30 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:30 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:30 DEBUG   opendrift.models.basemodel:2057:               -6.334673516427327e-20 <- latitude  -> 8.989295733904804e-06
12:55:30 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977409803359986e-05
12:55:30 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:30 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4909 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.225283792359042e-12 degrees.
12:55:30 DEBUG   opendrift.readers.basereader.variables:829: Masking 91 elements outside coverage
12:55:30 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 91 elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 91 elements
12:55:30 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 91 elements
12:55:30 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313896 (min) 0.314026 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340833 (min) 0.441341 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:30 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:30 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:30 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:30 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:30 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.281785081289952e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313869 (min) 0.31398 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346243 (min) 0.448909 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.242668804338233e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313842 (min) 0.314015 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346378 (min) 0.447872 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.25136131032752e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313914 (min) 0.313899 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350209 (min) 0.456681 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:30 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:30 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:30 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:30 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:30 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:30 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:30 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:30 DEBUG   opendrift.models.basemodel:2057:               -5.660757396914431e-20 <- latitude  -> 8.989282805213926e-06
12:55:30 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7975653160720984e-05
12:55:30 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:30 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4906 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755124e-12 degrees.
12:55:30 DEBUG   opendrift.readers.basereader.variables:829: Masking 94 elements outside coverage
12:55:30 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 94 elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 94 elements
12:55:30 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 94 elements
12:55:30 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313994 (min) 0.313719 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350453 (min) 0.458231 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:30 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:30 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:30 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:30 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:30 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.349152002706881e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314022 (min) 0.313742 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353017 (min) 0.464747 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.320901358241075e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314008 (min) 0.313676 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352812 (min) 0.464384 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.327420737733686e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314008 (min) 0.31365 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353787 (min) 0.4661 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:30 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:30 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:30 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:30 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:30 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:30 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:30 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:30 DEBUG   opendrift.models.basemodel:2057:               -5.2736613058201727e-20 <- latitude  -> 8.988558771982971e-06
12:55:30 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796800931109771e-05
12:55:30 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:30 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4905 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.366537014684781e-12 degrees.
12:55:30 DEBUG   opendrift.readers.basereader.variables:829: Masking 95 elements outside coverage
12:55:30 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 95 elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 95 elements
12:55:30 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 95 elements
12:55:30 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314044 (min) 0.31403 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353592 (min) 0.467666 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:30 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:30 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:30 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:30 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:30 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145264e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313847 (min) 0.314014 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352497 (min) 0.466875 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773669382e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313908 (min) 0.313984 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352684 (min) 0.466278 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664025e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314059 (min) 0.314029 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350201 (min) 0.460519 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:30 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:30 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:30 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:30 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:30 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:30 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:30 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:30 DEBUG   opendrift.models.basemodel:2057:               -4.034485977718526e-20 <- latitude  -> 8.987291902173418e-06
12:55:30 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7950656148628448e-05
12:55:30 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:30 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4905 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129143e-12 degrees.
12:55:30 DEBUG   opendrift.readers.basereader.variables:829: Masking 95 elements outside coverage
12:55:30 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 95 elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 95 elements
12:55:30 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 95 elements
12:55:30 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313523 (min) 0.313554 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.349148 (min) 0.461623 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:30 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:30 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:30 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:30 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:30 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102366e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313995 (min) 0.314089 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346145 (min) 0.450135 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621123e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314013 (min) 0.314076 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346144 (min) 0.449833 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42738455661041e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313884 (min) 0.313978 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340727 (min) 0.437091 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:30 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:30 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:30 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:30 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:30 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:30 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:30 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:30 DEBUG   opendrift.models.basemodel:2057:               -2.2481121842201822e-20 <- latitude  -> 8.989530219468694e-06
12:55:30 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7945147364681457e-05
12:55:30 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:30 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4913 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097031e-12 degrees.
12:55:30 DEBUG   opendrift.readers.basereader.variables:829: Masking 87 elements outside coverage
12:55:30 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 87 elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 87 elements
12:55:30 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 87 elements
12:55:30 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31368 (min) 0.314148 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340767 (min) 0.439342 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:30 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:30 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:30 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:30 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:30 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594378e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314087 (min) 0.313975 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3343 (min) 0.423523 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42738455661046e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314098 (min) 0.313971 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334246 (min) 0.423295 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42521143011314e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314126 (min) 0.31414 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328404 (min) 0.404742 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:30 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:30 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:30 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:30 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:30 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:30 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:30 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:30 DEBUG   opendrift.models.basemodel:2057:               -3.942265933515492e-21 <- latitude  -> 8.990474367135926e-06
12:55:30 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7959322898966678e-05
12:55:30 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:30 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4999 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107683e-12 degrees.
12:55:30 DEBUG   opendrift.readers.basereader.variables:829: Masking 1 elements outside coverage
12:55:30 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 1 elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 1 elements
12:55:30 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 1 elements
12:55:30 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313952 (min) 0.314033 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328161 (min) 0.404141 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:30 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:30 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:30 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:30 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:30 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075538e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31393 (min) 0.31398 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322443 (min) 0.383731 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588932e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314072 (min) 0.313964 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322423 (min) 0.383557 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578217e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314052 (min) 0.314083 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317853 (min) 0.361149 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:30 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:30 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:30 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:30 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:30 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:30 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:30 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:30 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.990541499365345e-06
12:55:30 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.79682425481516e-05
12:55:30 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:30 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556785e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31412 (min) 0.313773 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318166 (min) 0.361254 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:30 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:30 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:30 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:30 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:30 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043393e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314118 (min) 0.31395 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314551 (min) 0.337947 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551433e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314122 (min) 0.313922 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314695 (min) 0.337867 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551434e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313666 (min) 0.314012 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314122 (min) 0.31454 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:30 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:30 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:30 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:30 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:30 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:30 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:30 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:30 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.99103364895499e-06
12:55:30 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797174627495117e-05
12:55:30 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:30 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043405e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314071 (min) 0.314133 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313988 (min) 0.314563 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:30 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:30 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:30 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:30 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:30 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.48605897203805e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314031 (min) 0.31402 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315182 (min) 0.338503 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.48388584554073e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314119 (min) 0.314033 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315137 (min) 0.338824 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540731e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314064 (min) 0.313941 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318279 (min) 0.362584 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:30 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:30 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:30 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:30 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:30 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:30 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:30 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:30 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:30 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.991488739646816e-06
12:55:30 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976230892987417e-05
12:55:30 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:30 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038055e-12 degrees.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:30 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:30 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:30 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:30 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:30 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:30 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:30 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:30 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:30 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:30 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314112 (min) 0.314071 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3182 (min) 0.361617 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:30 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:30 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:30 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:30 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:30 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:31 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:31 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:31 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546104e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313869 (min) 0.314151 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322704 (min) 0.384716 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043424e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313763 (min) 0.314153 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322906 (min) 0.384204 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038067e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313962 (min) 0.31398 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328622 (min) 0.404823 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:31 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:31 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:31 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:31 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:31 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:31 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:31 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:31 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:31 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:31 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992205996828419e-06
12:55:31 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797821275826435e-05
12:55:31 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:31 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043435e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314119 (min) 0.314151 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328516 (min) 0.405881 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:31 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:31 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:31 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:31 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:31 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:31 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:31 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054163e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314063 (min) 0.314086 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334886 (min) 0.425005 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551483e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314114 (min) 0.314098 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33496 (min) 0.424469 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556839e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314107 (min) 0.31411 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340993 (min) 0.440342 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:31 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:31 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:31 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:31 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:31 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:31 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:31 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:31 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:31 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:31 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992615962006059e-06
12:55:31 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797890300979469e-05
12:55:31 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:31 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556853e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31415 (min) 0.31397 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340879 (min) 0.439935 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:31 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:31 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:31 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:31 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:31 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:31 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:31 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46215458056758e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314091 (min) 0.313401 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346223 (min) 0.452879 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567583e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314061 (min) 0.313414 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346274 (min) 0.452166 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46215458056758e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314065 (min) 0.3137 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350315 (min) 0.461428 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:31 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:31 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:31 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:31 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:31 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:31 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:31 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:31 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:31 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:31 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992827106707768e-06
12:55:31 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7978865883221054e-05
12:55:31 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:31 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070195e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314153 (min) 0.313996 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350235 (min) 0.462582 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:31 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:31 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:31 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:31 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:31 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:31 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:31 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064843e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314107 (min) 0.314155 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353051 (min) 0.468831 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567525e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314085 (min) 0.314154 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353091 (min) 0.468715 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070203e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314039 (min) 0.31415 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353921 (min) 0.470576 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:31 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:31 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:31 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:31 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:31 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:31 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:31 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:31 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:31 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:31 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992917531933365e-06
12:55:31 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7978328518187984e-05
12:55:31 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:31 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46432770706485e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314095 (min) 0.314078 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353947 (min) 0.470164 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:31 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:31 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:31 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:31 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:31 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:31 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:31 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562175e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313922 (min) 0.314121 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353012 (min) 0.468758 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064857e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314021 (min) 0.314152 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353045 (min) 0.468584 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562178e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313911 (min) 0.314094 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350367 (min) 0.462797 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:31 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:31 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:31 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:31 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:31 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:31 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:31 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:31 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:31 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:31 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.99293792607438e-06
12:55:31 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7978536789949082e-05
12:55:31 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:31 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46432770706486e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314043 (min) 0.313786 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350397 (min) 0.462764 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:31 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:31 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:31 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:31 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:31 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:31 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:31 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059511e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31368 (min) 0.314108 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346151 (min) 0.453073 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070232e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313858 (min) 0.314078 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346104 (min) 0.452793 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46215458056755e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313627 (min) 0.314158 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340703 (min) 0.43996 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:31 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:31 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:31 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:31 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:31 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:31 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:31 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:31 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:31 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:31 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992915185000504e-06
12:55:31 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7980418305768747e-05
12:55:31 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:31 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454069583e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314154 (min) 0.314117 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340583 (min) 0.438824 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:31 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:31 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:31 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:31 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:31 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:31 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:31 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572929e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31391 (min) 0.314029 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334577 (min) 0.424371 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572932e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313926 (min) 0.314127 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334533 (min) 0.424296 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080968e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314105 (min) 0.31413 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328399 (min) 0.405646 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:31 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:31 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:31 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:31 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:31 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:31 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:31 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:31 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:31 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:31 DEBUG   opendrift.models.basemodel:2057:               -6.89098065800742e-21 <- latitude  -> 8.99285645176638e-06
12:55:31 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7982020250854123e-05
12:55:31 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:31 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4621545805675e-12 degrees.
12:55:31 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:31 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:31 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:31 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314115 (min) 0.314099 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328529 (min) 0.405384 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:31 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:31 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:31 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:31 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:31 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:31 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:31 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054105e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314133 (min) 0.314082 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32275 (min) 0.384875 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556785e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31413 (min) 0.314062 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322739 (min) 0.3849 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059466e-12 degrees.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314073 (min) 0.314046 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317907 (min) 0.362148 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:31 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:31 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:31 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:31 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:31 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:31 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:31 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:31 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:31 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:31 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:31 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:31 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:31 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:31 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:31 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:31 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:31 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:31 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:31 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:31 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:06
12:55:31 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:31 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:31 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:31 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:31 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:31 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:31 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:31 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:31 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:31 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:31 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:31 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:31 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:31 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:31 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:31 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:31 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:31 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:31 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:31 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:31 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:31 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:18 to 2000-01-01 00:00:06)
12:55:31 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:31 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:31 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:31 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:31 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:32 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:32 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:32 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:32 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:32 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:32 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:32 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:32 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:32 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:32 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314159 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350573 (min) 0.463827 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:32 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:32 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:32 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:32 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:32 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118443e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314155 (min) 0.314075 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35296 (min) 0.469166 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118441e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314136 (min) 0.314055 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352876 (min) 0.469432 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118441e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314112 (min) 0.314112 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353654 (min) 0.471227 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:32 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:32 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:32 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:32 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:32 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:32 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:32 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:32 DEBUG   opendrift.models.basemodel:2057:               -2.090072202147033e-20 <- latitude  -> 8.893840465433163e-06
12:55:32 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7847435878822186e-05
12:55:32 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:32 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4990 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42521143011309e-12 degrees.
12:55:32 DEBUG   opendrift.readers.basereader.variables:829: Masking 10 elements outside coverage
12:55:32 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 10 elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 10 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 10 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313781 (min) 0.314159 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35384 (min) 0.471129 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:32 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:32 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:32 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:32 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:32 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43173080960506e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314044 (min) 0.314031 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352963 (min) 0.468603 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42955768310774e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31391 (min) 0.314079 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353024 (min) 0.469046 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107741e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314082 (min) 0.314156 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350222 (min) 0.463169 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:32 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:32 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:32 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:32 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:32 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:32 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:32 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:32 DEBUG   opendrift.models.basemodel:2057:               -2.1517966259293895e-20 <- latitude  -> 8.938117675150684e-06
12:55:32 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7878996997084053e-05
12:55:32 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:32 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4984 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610239e-12 degrees.
12:55:32 DEBUG   opendrift.readers.basereader.variables:829: Masking 16 elements outside coverage
12:55:32 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 16 elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 16 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 16 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313857 (min) 0.314151 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350197 (min) 0.462622 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:32 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:32 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:32 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:32 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:32 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42955768310776e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313917 (min) 0.314051 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346103 (min) 0.452798 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113118e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313959 (min) 0.314005 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346102 (min) 0.453306 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42738455661044e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313876 (min) 0.314151 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340712 (min) 0.440342 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:32 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:32 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:32 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:32 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:32 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:32 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:32 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:32 DEBUG   opendrift.models.basemodel:2057:               -2.571689729359303e-20 <- latitude  -> 8.96226730982333e-06
12:55:32 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7905384007889057e-05
12:55:32 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:32 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4973 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610449e-12 degrees.
12:55:32 DEBUG   opendrift.readers.basereader.variables:829: Masking 27 elements outside coverage
12:55:32 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 27 elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 27 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 27 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313951 (min) 0.314109 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340399 (min) 0.439758 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:32 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:32 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:32 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:32 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:32 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113145e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31352 (min) 0.314158 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33455 (min) 0.422695 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42303830361583e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313587 (min) 0.314155 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334551 (min) 0.422612 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621188e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31402 (min) 0.314022 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328338 (min) 0.40395 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:32 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:32 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:32 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:32 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:32 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:32 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:32 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:32 DEBUG   opendrift.models.basemodel:2057:               -3.134147034286065e-20 <- latitude  -> 8.974969838054986e-06
12:55:32 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7928039231723076e-05
12:55:32 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:32 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4957 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626565e-12 degrees.
12:55:32 DEBUG   opendrift.readers.basereader.variables:829: Masking 43 elements outside coverage
12:55:32 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 43 elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 43 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 43 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313406 (min) 0.313703 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328258 (min) 0.405828 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:32 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:32 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:32 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:32 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:32 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139333e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313677 (min) 0.314148 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322732 (min) 0.382882 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642666e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313667 (min) 0.314128 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322735 (min) 0.382659 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642671e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313841 (min) 0.314153 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317975 (min) 0.360382 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:32 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:32 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:32 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:32 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:32 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:32 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:32 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:32 DEBUG   opendrift.models.basemodel:2057:               -3.747215477008149e-20 <- latitude  -> 8.982309423924506e-06
12:55:32 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7946867191271436e-05
12:55:32 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:32 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4939 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664128e-12 degrees.
12:55:32 DEBUG   opendrift.readers.basereader.variables:829: Masking 61 elements outside coverage
12:55:32 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 61 elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 61 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 61 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314057 (min) 0.313866 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318044 (min) 0.360104 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:32 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:32 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:32 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:32 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:32 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690959e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314053 (min) 0.313248 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315079 (min) 0.337749 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696331e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314038 (min) 0.313423 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315131 (min) 0.337764 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701693e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314023 (min) 0.314062 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313951 (min) 0.314379 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:32 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:32 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:32 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:32 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:32 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:32 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:32 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:32 DEBUG   opendrift.models.basemodel:2057:               -4.5347359933172146e-20 <- latitude  -> 8.985723445754857e-06
12:55:32 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7961269540206953e-05
12:55:32 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:32 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4925 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32524761123657e-12 degrees.
12:55:32 DEBUG   opendrift.readers.basereader.variables:829: Masking 75 elements outside coverage
12:55:32 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 75 elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 75 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 75 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313839 (min) 0.314079 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31415 (min) 0.313533 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:32 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:32 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:32 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:32 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:32 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787545e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313818 (min) 0.313896 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314972 (min) 0.337446 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.26440006931168e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313795 (min) 0.314054 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314973 (min) 0.336644 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.264400069311683e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314011 (min) 0.314153 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318327 (min) 0.360287 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:32 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:32 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:32 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:32 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:32 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:32 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:32 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:32 DEBUG   opendrift.models.basemodel:2057:               -4.4652878816906343e-20 <- latitude  -> 8.988769054499387e-06
12:55:32 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7970940036438914e-05
12:55:32 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:32 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4916 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.210071906878745e-12 degrees.
12:55:32 DEBUG   opendrift.readers.basereader.variables:829: Masking 84 elements outside coverage
12:55:32 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 84 elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 84 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 84 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313823 (min) 0.313212 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318346 (min) 0.361529 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:32 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:32 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:32 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:32 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:32 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.129666226477996e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313742 (min) 0.313672 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323058 (min) 0.385498 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.105761835007498e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313713 (min) 0.313732 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32301 (min) 0.385877 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.101415582012237e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313806 (min) 0.313903 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328549 (min) 0.406771 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:32 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:32 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:32 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:32 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:32 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:32 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:32 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:32 DEBUG   opendrift.models.basemodel:2057:               -4.9709563329096624e-20 <- latitude  -> 8.990460246724167e-06
12:55:32 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976105906836163e-05
12:55:32 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:32 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4910 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.160089997440085e-12 degrees.
12:55:32 DEBUG   opendrift.readers.basereader.variables:829: Masking 90 elements outside coverage
12:55:32 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 90 elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 90 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 90 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314146 (min) 0.313965 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328691 (min) 0.391643 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:32 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:32 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:32 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:32 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:32 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.223110665862346e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313928 (min) 0.313962 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.335023 (min) 0.423473 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.190513768402545e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314003 (min) 0.313888 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334973 (min) 0.42435 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.197033147894473e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314092 (min) 0.313954 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3408 (min) 0.440153 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:32 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:32 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:32 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:32 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:32 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:32 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:32 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:32 DEBUG   opendrift.models.basemodel:2057:               -5.2181440147616896e-20 <- latitude  -> 8.991232858200793e-06
12:55:32 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977120432260743e-05
12:55:32 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:32 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4907 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.262226942814092e-12 degrees.
12:55:32 DEBUG   opendrift.readers.basereader.variables:829: Masking 93 elements outside coverage
12:55:32 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 93 elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 93 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 93 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313982 (min) 0.314129 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340815 (min) 0.435489 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:32 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:32 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:32 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:32 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:32 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755147e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314118 (min) 0.314147 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34617 (min) 0.448781 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.279611954792662e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314079 (min) 0.31412 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346303 (min) 0.447825 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.28613133428463e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314089 (min) 0.314151 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350417 (min) 0.456639 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:32 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:32 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:32 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:32 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:32 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:32 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:32 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:32 DEBUG   opendrift.models.basemodel:2057:               -5.047544604250679e-20 <- latitude  -> 8.991406697229629e-06
12:55:32 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7973491324606636e-05
12:55:32 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:32 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4905 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496716987e-12 degrees.
12:55:32 DEBUG   opendrift.readers.basereader.variables:829: Masking 95 elements outside coverage
12:55:32 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 95 elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 95 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 95 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314039 (min) 0.313785 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350434 (min) 0.458902 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:32 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:32 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:32 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:32 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:32 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:32 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172055e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314055 (min) 0.313845 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353039 (min) 0.465816 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876208928e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314035 (min) 0.313896 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353092 (min) 0.464882 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696176e-12 degrees.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314064 (min) 0.313985 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353981 (min) 0.466621 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:32 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:32 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:32 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:32 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:32 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:32 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:32 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:32 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:32 DEBUG   opendrift.models.basemodel:2057:               -4.274975372050603e-20 <- latitude  -> 8.991200140275654e-06
12:55:32 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796283973407593e-05
12:55:32 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:32 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4904 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39261453265327e-12 degrees.
12:55:32 DEBUG   opendrift.readers.basereader.variables:829: Masking 96 elements outside coverage
12:55:32 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 96 elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:32 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:32 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:32 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:32 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:32 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:32 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:32 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 96 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 96 elements
12:55:32 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:32 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:32 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314104 (min) 0.314086 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353768 (min) 0.467692 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:32 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:32 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:32 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:32 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:33 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:33 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:33 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118454e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314024 (min) 0.314042 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352774 (min) 0.46636 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642576e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31403 (min) 0.314019 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352882 (min) 0.465581 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637217e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313974 (min) 0.314005 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35033 (min) 0.459843 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:33 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:33 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:33 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:33 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:33 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:33 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:33 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:33 DEBUG   opendrift.models.basemodel:2057:               -2.956359269423135e-20 <- latitude  -> 8.99072573367425e-06
12:55:33 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7939887630989356e-05
12:55:33 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:33 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4904 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118483e-12 degrees.
12:55:33 DEBUG   opendrift.readers.basereader.variables:829: Masking 96 elements outside coverage
12:55:33 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 96 elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 96 elements
12:55:33 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 96 elements
12:55:33 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314139 (min) 0.31399 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350255 (min) 0.461972 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:33 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:33 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:33 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:33 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:33 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44259644209162e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31313 (min) 0.314057 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345627 (min) 0.452515 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113053e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313057 (min) 0.314054 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345607 (min) 0.452165 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610374e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313875 (min) 0.31399 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340716 (min) 0.439332 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:33 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:33 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:33 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:33 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:33 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:33 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:33 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:33 DEBUG   opendrift.models.basemodel:2057:               -1.3638802352448506e-20 <- latitude  -> 8.989985099376703e-06
12:55:33 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7952506623809748e-05
12:55:33 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:33 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4910 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201074898e-12 degrees.
12:55:33 DEBUG   opendrift.readers.basereader.variables:829: Masking 90 elements outside coverage
12:55:33 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 90 elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 90 elements
12:55:33 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 90 elements
12:55:33 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314089 (min) 0.313781 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340542 (min) 0.440082 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:33 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:33 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:33 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:33 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:33 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562165e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313555 (min) 0.314068 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334373 (min) 0.423466 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572888e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313822 (min) 0.314087 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334323 (min) 0.423665 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45998145407021e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314104 (min) 0.314089 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328438 (min) 0.405006 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:33 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:33 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:33 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:33 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:33 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:33 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:33 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:33 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.99032682892356e-06
12:55:33 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796476454886605e-05
12:55:33 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:33 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562185e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314122 (min) 0.314023 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328488 (min) 0.405078 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:33 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:33 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:33 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:33 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:33 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064883e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313937 (min) 0.314157 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322704 (min) 0.384695 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070239e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313931 (min) 0.314156 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322728 (min) 0.384657 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075603e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314145 (min) 0.313804 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318121 (min) 0.361964 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:33 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:33 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:33 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:33 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:33 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:33 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:33 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:33 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.991205794247543e-06
12:55:33 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7972128565414303e-05
12:55:33 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:33 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080978e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314013 (min) 0.314116 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318167 (min) 0.360123 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:33 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:33 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:33 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:33 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:33 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091724e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313975 (min) 0.314124 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314877 (min) 0.337299 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599765e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31391 (min) 0.314133 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314805 (min) 0.337331 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599768e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314143 (min) 0.314142 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314015 (min) 0.314089 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:33 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:33 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:33 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:33 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:33 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:33 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:33 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:33 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.991757132191448e-06
12:55:33 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7975619016682497e-05
12:55:33 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:33 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610395e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314028 (min) 0.314007 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31354 (min) 0.314056 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:33 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:33 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:33 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:33 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:33 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097013e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314079 (min) 0.313921 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315256 (min) 0.338946 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102372e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314081 (min) 0.313968 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315235 (min) 0.338737 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610237e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314074 (min) 0.313905 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318224 (min) 0.362492 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:33 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:33 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:33 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:33 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:33 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:33 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:33 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:33 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.99208709772938e-06
12:55:33 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797602596415402e-05
12:55:33 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:33 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594346e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314089 (min) 0.31411 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318234 (min) 0.362031 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:33 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:33 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:33 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:33 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:33 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594359e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313885 (min) 0.314107 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322986 (min) 0.385632 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599723e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314011 (min) 0.314113 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322994 (min) 0.385297 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43607706259972e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31395 (min) 0.314098 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328679 (min) 0.406186 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:33 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:33 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:33 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:33 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:33 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:33 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:33 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:33 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992316979675417e-06
12:55:33 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797912262217076e-05
12:55:33 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:33 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097054e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313504 (min) 0.314003 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328713 (min) 0.404947 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:33 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:33 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:33 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:33 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:33 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605014e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314076 (min) 0.313826 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334919 (min) 0.424771 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610468e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314072 (min) 0.313843 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334776 (min) 0.424848 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107788e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314092 (min) 0.313963 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341011 (min) 0.440692 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:33 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:33 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:33 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:33 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:33 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:33 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:33 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:33 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992684714511435e-06
12:55:33 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7980880546931906e-05
12:55:33 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:33 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4404233155943e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314036 (min) 0.313696 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340744 (min) 0.440723 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:33 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:33 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:33 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:33 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:33 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583584e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314041 (min) 0.31414 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346007 (min) 0.453286 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583587e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314006 (min) 0.314148 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346141 (min) 0.453836 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583587e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313946 (min) 0.313903 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350378 (min) 0.463178 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:33 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:33 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:33 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:33 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:33 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:33 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:33 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:33 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992898305078084e-06
12:55:33 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7981907114931895e-05
12:55:33 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:33 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075553e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313711 (min) 0.314075 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350312 (min) 0.461957 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:33 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:33 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:33 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:33 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:33 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567515e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314069 (min) 0.314034 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352954 (min) 0.468665 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572872e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313976 (min) 0.314063 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353025 (min) 0.469117 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567516e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313932 (min) 0.314002 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353945 (min) 0.470989 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:33 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:33 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:33 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:33 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:33 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:33 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:33 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:33 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.993004296707082e-06
12:55:33 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7982535123275215e-05
12:55:33 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:33 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567521e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313925 (min) 0.31395 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353965 (min) 0.470186 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:33 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:33 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:33 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:33 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:33 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562164e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313972 (min) 0.314104 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352889 (min) 0.468307 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562167e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314028 (min) 0.314032 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352971 (min) 0.467954 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064847e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31397 (min) 0.314053 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35039 (min) 0.462186 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:33 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:33 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:33 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:33 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:33 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:33 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:33 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:33 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.993024981691048e-06
12:55:33 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7982913421565265e-05
12:55:33 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:33 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562174e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31411 (min) 0.314137 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350332 (min) 0.463083 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:33 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:33 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:33 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:33 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:33 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:33 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064859e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314041 (min) 0.314108 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345902 (min) 0.452807 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562178e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314105 (min) 0.314126 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345847 (min) 0.452539 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059501e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:33 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314039 (min) 0.314124 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340649 (min) 0.439695 (max)
12:55:33 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:33 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:33 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:33 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:33 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:33 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:33 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:33 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:33 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:33 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:33 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.99295697004009e-06
12:55:33 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798307238676991e-05
12:55:33 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:33 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562191e-12 degrees.
12:55:33 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:33 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:33 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:33 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:33 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:33 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:33 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:33 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314077 (min) 0.314154 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340824 (min) 0.439787 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:34 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:34 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:34 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:34 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:34 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:34 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:34 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567554e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314042 (min) 0.314138 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33465 (min) 0.424495 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567555e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314029 (min) 0.314117 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33461 (min) 0.424582 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567555e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313931 (min) 0.314011 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328242 (min) 0.40585 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:34 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:34 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:34 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:34 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:34 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:34 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:34 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:34 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:06.500000
12:55:34 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:34 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:34 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:34 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:34 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:34 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:34 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:34 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:34 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:34 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:34 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:34 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:34 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:34 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:34 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:34 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:34 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:34 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:34 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:34 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:34 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:34 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:18.500000 to 2000-01-01 00:00:06.500000)
12:55:34 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:34 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:34 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:34 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:34 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:34 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:34 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:34 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:34 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:34 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:34 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:34 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:34 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:34 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:34 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31412 (min) 0.314151 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341032 (min) 0.441781 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:34 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:34 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:34 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:34 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:34 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:34 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:34 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610408e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313972 (min) 0.314111 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346248 (min) 0.454459 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621122e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313997 (min) 0.314126 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346276 (min) 0.454453 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621122e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314156 (min) 0.314158 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350489 (min) 0.463751 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:34 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:34 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:34 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:34 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:34 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:34 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:34 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:34 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:34 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:34 DEBUG   opendrift.models.basemodel:2057:               -2.380135454919603e-20 <- latitude  -> 8.89264242679939e-06
12:55:34 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.785072236155521e-05
12:55:34 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:34 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4989 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610413e-12 degrees.
12:55:34 DEBUG   opendrift.readers.basereader.variables:829: Masking 11 elements outside coverage
12:55:34 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 11 elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 11 elements
12:55:34 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 11 elements
12:55:34 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314058 (min) 0.314113 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350395 (min) 0.463502 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:34 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:34 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:34 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:34 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:34 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:34 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:34 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107741e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314137 (min) 0.314114 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352845 (min) 0.469197 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107743e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314037 (min) 0.314133 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353011 (min) 0.468977 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610421e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313987 (min) 0.314089 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353814 (min) 0.470787 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:34 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:34 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:34 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:34 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:34 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:34 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:34 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:34 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:34 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:34 DEBUG   opendrift.models.basemodel:2057:               -2.217554705895394e-20 <- latitude  -> 8.937659330050718e-06
12:55:34 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.788145097050756e-05
12:55:34 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:34 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4984 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605072e-12 degrees.
12:55:34 DEBUG   opendrift.readers.basereader.variables:829: Masking 16 elements outside coverage
12:55:34 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 16 elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 16 elements
12:55:34 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 16 elements
12:55:34 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313906 (min) 0.314129 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35357 (min) 0.470103 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:34 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:34 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:34 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:34 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:34 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:34 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:34 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43173080960508e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314062 (min) 0.314048 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352951 (min) 0.467572 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42738455661044e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314151 (min) 0.314092 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353017 (min) 0.468516 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107762e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314067 (min) 0.314153 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350325 (min) 0.46266 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:34 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:34 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:34 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:34 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:34 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:34 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:34 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:34 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:34 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:34 DEBUG   opendrift.models.basemodel:2057:               -2.238869911559124e-20 <- latitude  -> 8.962416408744911e-06
12:55:34 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.790519087595276e-05
12:55:34 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:34 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4977 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107768e-12 degrees.
12:55:34 DEBUG   opendrift.readers.basereader.variables:829: Masking 23 elements outside coverage
12:55:34 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 23 elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 23 elements
12:55:34 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 23 elements
12:55:34 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314097 (min) 0.314041 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350007 (min) 0.462203 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:34 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:34 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:34 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:34 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:34 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:34 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:34 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615824e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313955 (min) 0.314144 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345809 (min) 0.45093 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177117856e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31393 (min) 0.314158 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345734 (min) 0.450426 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711851e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313944 (min) 0.313667 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340546 (min) 0.437614 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:34 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:34 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:34 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:34 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:34 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:34 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:34 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:34 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:34 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:34 DEBUG   opendrift.models.basemodel:2057:               -2.510041305969973e-20 <- latitude  -> 8.9756287325612e-06
12:55:34 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.792503850954549e-05
12:55:34 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:34 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4966 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123878e-12 degrees.
12:55:34 DEBUG   opendrift.readers.basereader.variables:829: Masking 34 elements outside coverage
12:55:34 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 34 elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 34 elements
12:55:34 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 34 elements
12:55:34 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313942 (min) 0.314038 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340134 (min) 0.440114 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:34 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:34 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:34 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:34 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:34 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:34 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:34 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631932e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314092 (min) 0.314018 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334428 (min) 0.42165 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139978e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314101 (min) 0.314115 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334423 (min) 0.421126 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134615e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312734 (min) 0.313952 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328386 (min) 0.402841 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:34 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:34 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:34 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:34 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:34 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:34 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:34 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:34 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:34 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:34 DEBUG   opendrift.models.basemodel:2057:               -3.140995708193711e-20 <- latitude  -> 8.98312614684786e-06
12:55:34 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7942058958180225e-05
12:55:34 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:34 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4947 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150719e-12 degrees.
12:55:34 DEBUG   opendrift.readers.basereader.variables:829: Masking 53 elements outside coverage
12:55:34 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 53 elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 53 elements
12:55:34 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 53 elements
12:55:34 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314003 (min) 0.314159 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328199 (min) 0.405837 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:34 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:34 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:34 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:34 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:34 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:34 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:34 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.3795757736695e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31414 (min) 0.314148 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322549 (min) 0.383985 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172187e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314142 (min) 0.314143 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322493 (min) 0.383908 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.373056394177546e-12 degrees.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313767 (min) 0.314156 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318078 (min) 0.361315 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:34 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:34 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:34 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:34 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:34 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:34 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:34 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:34 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:34 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:34 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:34 DEBUG   opendrift.models.basemodel:2057:               -3.7931243319762525e-20 <- latitude  -> 8.986918861007776e-06
12:55:34 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7956148940957087e-05
12:55:34 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:34 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4929 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701697e-12 degrees.
12:55:34 DEBUG   opendrift.readers.basereader.variables:829: Masking 71 elements outside coverage
12:55:34 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 71 elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:34 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:34 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:34 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:34 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:34 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:34 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:34 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:34 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 71 elements
12:55:34 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 71 elements
12:55:34 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:34 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:34 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313641 (min) 0.313953 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318109 (min) 0.361284 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:34 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:35 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:35 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:35 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:35 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:35 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.320901358241293e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313703 (min) 0.314128 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315138 (min) 0.337303 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252667e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313679 (min) 0.314159 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315138 (min) 0.337396 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.307862599258027e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313664 (min) 0.313086 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314078 (min) 0.313928 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:35 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:35 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:35 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:35 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:35 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:35 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:35 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:35 DEBUG   opendrift.models.basemodel:2057:               -4.055785958569598e-20 <- latitude  -> 8.988272622146848e-06
12:55:35 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7966807777674055e-05
12:55:35 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:35 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4918 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.273092575300957e-12 degrees.
12:55:35 DEBUG   opendrift.readers.basereader.variables:829: Masking 82 elements outside coverage
12:55:35 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 82 elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 82 elements
12:55:35 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 82 elements
12:55:35 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313993 (min) 0.313925 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314062 (min) 0.313216 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:35 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:35 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:35 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:35 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:35 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.216591286370067e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313873 (min) 0.313506 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315059 (min) 0.338131 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.19703314789484e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313843 (min) 0.313303 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31489 (min) 0.337424 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.192686894900203e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314021 (min) 0.312777 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318249 (min) 0.361146 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:35 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:35 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:35 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:35 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:35 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:35 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:35 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:35 DEBUG   opendrift.models.basemodel:2057:               -4.3621468201195405e-20 <- latitude  -> 8.990108800554717e-06
12:55:35 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797371602487914e-05
12:55:35 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:35 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4912 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.120973720488718e-12 degrees.
12:55:35 DEBUG   opendrift.readers.basereader.variables:829: Masking 88 elements outside coverage
12:55:35 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 88 elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 88 elements
12:55:35 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 88 elements
12:55:35 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313908 (min) 0.313417 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31827 (min) 0.362916 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:35 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:35 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:35 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:35 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:35 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.164436250434684e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313796 (min) 0.313855 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322967 (min) 0.374788 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.134012479471577e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313753 (min) 0.313771 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323053 (min) 0.37389 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.136185605968897e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313717 (min) 0.313859 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32863 (min) 0.394203 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:35 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:35 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:35 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:35 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:35 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:35 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:35 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:35 DEBUG   opendrift.models.basemodel:2057:               -4.603611153964318e-20 <- latitude  -> 8.991341285107738e-06
12:55:35 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797686664972451e-05
12:55:35 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:35 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4908 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.207898780381087e-12 degrees.
12:55:35 DEBUG   opendrift.readers.basereader.variables:829: Masking 92 elements outside coverage
12:55:35 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 92 elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 92 elements
12:55:35 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 92 elements
12:55:35 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31372 (min) 0.314025 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328577 (min) 0.404343 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:35 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:35 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:35 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:35 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:35 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.264400069311394e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313967 (min) 0.314077 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334983 (min) 0.420261 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.231803171851592e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313958 (min) 0.314094 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334863 (min) 0.419346 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.238322551343556e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31395 (min) 0.313786 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34073 (min) 0.434758 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:35 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:35 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:35 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:35 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:35 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:35 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:35 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:35 DEBUG   opendrift.models.basemodel:2057:               -4.6659268636789155e-20 <- latitude  -> 8.992104539609909e-06
12:55:35 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976104993415636e-05
12:55:35 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:35 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4906 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.299170093268523e-12 degrees.
12:55:35 DEBUG   opendrift.readers.basereader.variables:829: Masking 94 elements outside coverage
12:55:35 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 94 elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 94 elements
12:55:35 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 94 elements
12:55:35 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31382 (min) 0.313894 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340873 (min) 0.435614 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:35 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:35 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:35 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:35 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:35 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.34263262321492e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31365 (min) 0.314079 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346357 (min) 0.449625 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.3187282317444e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313665 (min) 0.314093 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346319 (min) 0.448732 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.320901358241721e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313963 (min) 0.313859 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350249 (min) 0.45762 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:35 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:35 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:35 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:35 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:35 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:35 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:35 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:35 DEBUG   opendrift.models.basemodel:2057:               -4.353398047811592e-20 <- latitude  -> 8.992546009414173e-06
12:55:35 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7970119497154053e-05
12:55:35 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:35 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4904 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.366537014685424e-12 degrees.
12:55:35 DEBUG   opendrift.readers.basereader.variables:829: Masking 96 elements outside coverage
12:55:35 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 96 elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 96 elements
12:55:35 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 96 elements
12:55:35 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313888 (min) 0.314123 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350497 (min) 0.458867 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:35 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:35 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:35 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:35 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:35 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145258e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313734 (min) 0.314065 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353045 (min) 0.466527 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172058e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313556 (min) 0.314044 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353115 (min) 0.466061 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166697e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313613 (min) 0.314056 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353987 (min) 0.467816 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:35 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:35 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:35 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:35 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:35 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:35 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:35 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:35 DEBUG   opendrift.models.basemodel:2057:               -3.563890843860351e-20 <- latitude  -> 8.992760081978344e-06
12:55:35 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.795536981338096e-05
12:55:35 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:35 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4903 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631812e-12 degrees.
12:55:35 DEBUG   opendrift.readers.basereader.variables:829: Masking 97 elements outside coverage
12:55:35 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 97 elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 97 elements
12:55:35 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 97 elements
12:55:35 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314071 (min) 0.313892 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353586 (min) 0.469045 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:35 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:35 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:35 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:35 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:35 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599674e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314136 (min) 0.313604 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352801 (min) 0.464873 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113074e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31413 (min) 0.313727 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35271 (min) 0.465251 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610399e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314059 (min) 0.313901 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350232 (min) 0.459517 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:35 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:35 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:35 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:35 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:35 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:35 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:35 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:35 DEBUG   opendrift.models.basemodel:2057:               -2.358956065113473e-20 <- latitude  -> 8.992788901580048e-06
12:55:35 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7942083100432838e-05
12:55:35 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:35 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4903 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588975e-12 degrees.
12:55:35 DEBUG   opendrift.readers.basereader.variables:829: Masking 97 elements outside coverage
12:55:35 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 97 elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 97 elements
12:55:35 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 97 elements
12:55:35 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314108 (min) 0.313963 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350233 (min) 0.461367 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:35 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:35 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:35 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:35 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:35 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086318e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314083 (min) 0.314043 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345665 (min) 0.452481 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097044e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313947 (min) 0.314073 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345844 (min) 0.452592 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091686e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314084 (min) 0.314149 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340704 (min) 0.439744 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:35 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:35 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:35 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:35 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:35 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:35 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:35 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:35 DEBUG   opendrift.models.basemodel:2057:               -9.234186035656329e-21 <- latitude  -> 8.992618118867534e-06
12:55:35 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.795878788263685e-05
12:55:35 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:35 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4908 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605104e-12 degrees.
12:55:35 DEBUG   opendrift.readers.basereader.variables:829: Masking 92 elements outside coverage
12:55:35 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 92 elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 92 elements
12:55:35 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 92 elements
12:55:35 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314071 (min) 0.313788 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340603 (min) 0.43884 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:35 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:35 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:35 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:35 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:35 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123251e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313622 (min) 0.314089 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334532 (min) 0.423732 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134625e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313854 (min) 0.314102 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334472 (min) 0.423964 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40782641813463e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313841 (min) 0.31401 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328184 (min) 0.405261 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:35 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:35 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:35 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:35 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:35 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:35 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:35 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:35 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992672913383807e-06
12:55:35 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796953237368862e-05
12:55:35 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:35 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38174890016683e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313885 (min) 0.314031 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328024 (min) 0.405387 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:35 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:35 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:35 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:35 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:35 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150623e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313666 (min) 0.314016 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322441 (min) 0.384364 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38609515316135e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313881 (min) 0.313969 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322347 (min) 0.384361 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38826827965867e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.313916 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317739 (min) 0.361682 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:35 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:35 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:35 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:35 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:35 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:35 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:35 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:35 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992811548290175e-06
12:55:35 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7974090078096252e-05
12:55:35 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:35 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647977e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314055 (min) 0.314155 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317874 (min) 0.361545 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:35 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:35 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:35 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:35 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:35 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637176e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314108 (min) 0.314056 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314844 (min) 0.337951 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39044140615593e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314134 (min) 0.314044 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31474 (min) 0.337893 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150572e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314149 (min) 0.314003 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313466 (min) 0.31452 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:35 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:35 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:35 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:35 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:35 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:35 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:35 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:35 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:35 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992972250261373e-06
12:55:35 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797846544541673e-05
12:55:35 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:35 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615755e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314075 (min) 0.314127 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313915 (min) 0.314234 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:35 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:35 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:35 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:35 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:35 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:35 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086242e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313767 (min) 0.31406 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314921 (min) 0.338632 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594281e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313602 (min) 0.314076 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314762 (min) 0.338569 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:35 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:35 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:35 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:35 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44042331559428e-12 degrees.
12:55:35 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:35 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:35 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313845 (min) 0.314135 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318133 (min) 0.362132 (max)
12:55:35 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:36 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:36 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:36 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:36 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:36 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:36 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:36 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:36 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:36 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:36 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.993071672577217e-06
12:55:36 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798021657968878e-05
12:55:36 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:36 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567486e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314143 (min) 0.314037 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31801 (min) 0.362222 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:36 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:36 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:36 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:36 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:36 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:36 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:36 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048735e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314114 (min) 0.313943 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322957 (min) 0.38533 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054092e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314137 (min) 0.313901 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323004 (min) 0.385628 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556773e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314114 (min) 0.314096 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328574 (min) 0.406528 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:36 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:36 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:36 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:36 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:36 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:36 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:36 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:36 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:36 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:36 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.993130399480124e-06
12:55:36 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798063579702873e-05
12:55:36 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:36 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546056e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314107 (min) 0.313647 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328626 (min) 0.404956 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:36 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:36 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:36 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:36 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:36 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:36 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:36 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032664e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314144 (min) 0.314112 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334866 (min) 0.424189 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038021e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314104 (min) 0.314124 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334722 (min) 0.424786 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535341e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313824 (min) 0.313889 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341009 (min) 0.440679 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:36 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:36 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:36 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:36 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:36 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:36 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:36 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:36 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:36 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:36 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.993161713011529e-06
12:55:36 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7980319440055737e-05
12:55:36 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:36 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529982e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314107 (min) 0.313899 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340784 (min) 0.440593 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:36 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:36 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:36 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:36 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:36 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:36 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:36 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.499097731021943e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314157 (min) 0.313954 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346317 (min) 0.453692 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.499097731021943e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314156 (min) 0.313933 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346318 (min) 0.453352 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027307e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313815 (min) 0.313826 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350288 (min) 0.462665 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:36 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:36 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:36 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:36 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:36 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:36 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:36 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:36 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:36 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:36 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.993175221267095e-06
12:55:36 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7979544605392672e-05
12:55:36 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:36 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.503443984016587e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313836 (min) 0.314076 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350385 (min) 0.461331 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:36 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:36 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:36 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:36 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:36 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:36 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:36 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.505617110513908e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314157 (min) 0.313613 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352963 (min) 0.468922 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.505617110513908e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314156 (min) 0.313883 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352954 (min) 0.468472 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.505617110513908e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314152 (min) 0.313812 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353911 (min) 0.470344 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:36 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:36 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:36 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:36 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:36 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:36 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:36 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:36 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:36 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:36 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.993177763092434e-06
12:55:36 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797838457688259e-05
12:55:36 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:36 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.507790237011228e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314063 (min) 0.314142 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353844 (min) 0.469122 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:36 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:36 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:36 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:36 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:36 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:36 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:36 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.507790237011234e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314105 (min) 0.314023 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353051 (min) 0.468699 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.507790237011231e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31413 (min) 0.314062 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353069 (min) 0.468524 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.505617110513915e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314145 (min) 0.314128 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350396 (min) 0.462739 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:36 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:36 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:36 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:36 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:36 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:36 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:36 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:36 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:36 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:36 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.993173480050639e-06
12:55:36 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976725012642287e-05
12:55:36 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:36 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.509963363508552e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314069 (min) 0.313983 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350314 (min) 0.461633 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:36 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:36 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:36 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:36 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:36 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:36 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:36 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.50996336350855e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314105 (min) 0.314059 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346133 (min) 0.453321 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.512136490005873e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314107 (min) 0.314019 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34617 (min) 0.453189 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.509963363508554e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314094 (min) 0.314091 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340823 (min) 0.440338 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:36 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:36 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:36 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:36 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:36 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:36 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:36 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:36 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:07
12:55:36 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:36 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:36 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:36 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:36 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:36 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:36 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:36 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:36 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:36 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:36 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:36 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:36 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:36 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:36 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:36 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:36 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:36 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:36 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:36 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:36 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:36 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:19 to 2000-01-01 00:00:07)
12:55:36 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:36 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:36 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:36 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:36 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:36 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:36 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:36 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:36 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:36 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:36 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:36 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:36 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:36 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:36 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:36 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:36 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:36 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:36 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:36 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:36 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:36 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:36 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:36 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:36 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:36 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314118 (min) 0.314088 (max)
12:55:36 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328728 (min) 0.407256 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:37 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:37 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:37 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:37 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:37 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:37 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:37 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610408e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314078 (min) 0.314158 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.335033 (min) 0.425878 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621125e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313939 (min) 0.314156 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.335053 (min) 0.425788 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118445e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314145 (min) 0.314137 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341008 (min) 0.441673 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:37 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:37 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:37 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:37 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:37 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:37 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:37 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:37 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:37 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:37 DEBUG   opendrift.models.basemodel:2057:               -2.933257088558232e-20 <- latitude  -> 8.890530679564665e-06
12:55:37 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7856897250055863e-05
12:55:37 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:37 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4987 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605056e-12 degrees.
12:55:37 DEBUG   opendrift.readers.basereader.variables:829: Masking 13 elements outside coverage
12:55:37 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 13 elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 13 elements
12:55:37 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 13 elements
12:55:37 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313899 (min) 0.314064 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341116 (min) 0.441766 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:37 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:37 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:37 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:37 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:37 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:37 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:37 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107746e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313634 (min) 0.314148 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346356 (min) 0.454315 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107746e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313881 (min) 0.314141 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34614 (min) 0.45453 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107746e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314126 (min) 0.31403 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350377 (min) 0.463826 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:37 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:37 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:37 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:37 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:37 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:37 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:37 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:37 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:37 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:37 DEBUG   opendrift.models.basemodel:2057:               -2.543363119770561e-20 <- latitude  -> 8.935687722197119e-06
12:55:37 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7888579803899894e-05
12:55:37 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:37 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4984 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610434e-12 degrees.
12:55:37 DEBUG   opendrift.readers.basereader.variables:829: Masking 16 elements outside coverage
12:55:37 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 16 elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 16 elements
12:55:37 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 16 elements
12:55:37 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314102 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350488 (min) 0.463827 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:37 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:37 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:37 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:37 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:37 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:37 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:37 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113124e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313889 (min) 0.314112 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352963 (min) 0.468973 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113126e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313828 (min) 0.314095 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352726 (min) 0.46843 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610447e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313803 (min) 0.314137 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353654 (min) 0.470235 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:37 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:37 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:37 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:37 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:37 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:37 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:37 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:37 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:37 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:37 DEBUG   opendrift.models.basemodel:2057:               -2.265241933460592e-20 <- latitude  -> 8.961231734665112e-06
12:55:37 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.791062625815107e-05
12:55:37 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:37 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4979 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615818e-12 degrees.
12:55:37 DEBUG   opendrift.readers.basereader.variables:829: Masking 21 elements outside coverage
12:55:37 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 21 elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 21 elements
12:55:37 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 21 elements
12:55:37 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314143 (min) 0.31398 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353925 (min) 0.471236 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:37 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:37 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:37 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:37 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:37 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:37 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:37 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711851e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313445 (min) 0.314114 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352223 (min) 0.468418 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118511e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313579 (min) 0.314138 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352513 (min) 0.467991 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621191e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31338 (min) 0.314122 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350118 (min) 0.462135 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:37 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:37 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:37 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:37 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:37 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:37 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:37 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:37 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:37 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:37 DEBUG   opendrift.models.basemodel:2057:               -2.2008634170541858e-20 <- latitude  -> 8.975352476648791e-06
12:55:37 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7927652614377984e-05
12:55:37 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:37 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4973 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626563e-12 degrees.
12:55:37 DEBUG   opendrift.readers.basereader.variables:829: Masking 27 elements outside coverage
12:55:37 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 27 elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 27 elements
12:55:37 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 27 elements
12:55:37 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313531 (min) 0.314143 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350206 (min) 0.46326 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:37 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:37 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:37 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:37 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:37 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:37 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:37 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631935e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312318 (min) 0.313911 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346032 (min) 0.449886 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40348016513998e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312342 (min) 0.314002 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346082 (min) 0.449064 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637299e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313746 (min) 0.314043 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340623 (min) 0.436467 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:37 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:37 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:37 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:37 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:37 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:37 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:37 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:37 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:37 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:37 DEBUG   opendrift.models.basemodel:2057:               -2.463490978338109e-20 <- latitude  -> 8.983177998467943e-06
12:55:37 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7941869917322103e-05
12:55:37 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:37 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4960 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785648037e-12 degrees.
12:55:37 DEBUG   opendrift.readers.basereader.variables:829: Masking 40 elements outside coverage
12:55:37 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 40 elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 40 elements
12:55:37 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 40 elements
12:55:37 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314039 (min) 0.313559 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.337958 (min) 0.440752 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:37 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:37 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:37 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:37 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:37 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:37 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:37 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664136e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313602 (min) 0.314031 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334617 (min) 0.423474 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37740264717218e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31351 (min) 0.314101 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334632 (min) 0.423339 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172182e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313578 (min) 0.313531 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328328 (min) 0.404729 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:37 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:37 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:37 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:37 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:37 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:37 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:37 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:37 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:37 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:37 DEBUG   opendrift.models.basemodel:2057:               -2.843735034701641e-20 <- latitude  -> 8.987457203152393e-06
12:55:37 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7954020290864672e-05
12:55:37 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:37 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4938 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.360017635192998e-12 degrees.
12:55:37 DEBUG   opendrift.readers.basereader.variables:829: Masking 62 elements outside coverage
12:55:37 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 62 elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 62 elements
12:55:37 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 62 elements
12:55:37 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313853 (min) 0.314033 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328421 (min) 0.404614 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:37 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:37 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:37 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:37 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:37 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:37 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:37 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.338286370220477e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313607 (min) 0.31391 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322634 (min) 0.383713 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.329593864231205e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313603 (min) 0.313755 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322595 (min) 0.383636 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728528e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31415 (min) 0.313823 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318101 (min) 0.361118 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:37 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:37 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:37 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:37 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:37 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:37 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:37 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:37 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:37 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:37 DEBUG   opendrift.models.basemodel:2057:               -3.528175905097174e-20 <- latitude  -> 8.989621936418957e-06
12:55:37 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7963989894899185e-05
12:55:37 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:37 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4921 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.301343219766085e-12 degrees.
12:55:37 DEBUG   opendrift.readers.basereader.variables:829: Masking 79 elements outside coverage
12:55:37 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 79 elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 79 elements
12:55:37 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 79 elements
12:55:37 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313716 (min) 0.313881 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318121 (min) 0.361318 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:37 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:37 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:37 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:37 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:37 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:37 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:37 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.257880689819735e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313811 (min) 0.314064 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31475 (min) 0.337656 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.244841930835828e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313761 (min) 0.313981 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314834 (min) 0.337594 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057332513e-12 degrees.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313751 (min) 0.313761 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313813 (min) 0.314435 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:37 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:37 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:37 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:37 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:37 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:37 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:37 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:37 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:37 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:37 DEBUG   opendrift.models.basemodel:2057:               -3.736159801311123e-20 <- latitude  -> 8.990394628965167e-06
12:55:37 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797134886555672e-05
12:55:37 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:37 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4913 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.190513768402885e-12 degrees.
12:55:37 DEBUG   opendrift.readers.basereader.variables:829: Masking 87 elements outside coverage
12:55:37 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 87 elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:37 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:37 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:37 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:37 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:37 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:37 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:37 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:37 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 87 elements
12:55:37 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 87 elements
12:55:37 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:37 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:37 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313855 (min) 0.31355 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313872 (min) 0.313106 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:37 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:37 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:37 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:37 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:37 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:37 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:38 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:38 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:38 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.114454340996767e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313968 (min) 0.314152 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315222 (min) 0.33936 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.097069329017604e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313947 (min) 0.314128 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315218 (min) 0.339363 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.094896202520912e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313833 (min) 0.314145 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318157 (min) 0.36323 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:38 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:38 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:38 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:38 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:38 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:38 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:38 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:38 DEBUG   opendrift.models.basemodel:2057:               -3.9708685381655115e-20 <- latitude  -> 8.990175167715562e-06
12:55:38 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7975734239913762e-05
12:55:38 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:38 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4909 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.153570617948072e-12 degrees.
12:55:38 DEBUG   opendrift.readers.basereader.variables:829: Masking 91 elements outside coverage
12:55:38 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 91 elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 91 elements
12:55:38 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 91 elements
12:55:38 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314084 (min) 0.314136 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318323 (min) 0.353036 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:38 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:38 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:38 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:38 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:38 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.210071906878421e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314022 (min) 0.314083 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323058 (min) 0.383239 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.181821262413263e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314008 (min) 0.314036 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323003 (min) 0.384293 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.188340641905191e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313826 (min) 0.3141 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328663 (min) 0.405 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:38 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:38 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:38 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:38 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:38 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:38 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:38 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:38 DEBUG   opendrift.models.basemodel:2057:               -4.210369257229098e-20 <- latitude  -> 8.989241816761253e-06
12:55:38 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976855097945148e-05
12:55:38 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:38 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4906 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057332846e-12 degrees.
12:55:38 DEBUG   opendrift.readers.basereader.variables:829: Masking 94 elements outside coverage
12:55:38 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 94 elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 94 elements
12:55:38 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 94 elements
12:55:38 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31405 (min) 0.314144 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328659 (min) 0.402313 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:38 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:38 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:38 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:38 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:38 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29699696677122e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313741 (min) 0.313698 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33501 (min) 0.420603 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798023e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313718 (min) 0.313853 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334881 (min) 0.419939 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.277438828295302e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313688 (min) 0.314116 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341019 (min) 0.435021 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:38 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:38 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:38 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:38 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:38 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:38 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:38 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:38 DEBUG   opendrift.models.basemodel:2057:               -4.2522069421420105e-20 <- latitude  -> 8.987808120046748e-06
12:55:38 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797392156926897e-05
12:55:38 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:38 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4904 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.329593864231025e-12 degrees.
12:55:38 DEBUG   opendrift.readers.basereader.variables:829: Masking 96 elements outside coverage
12:55:38 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 96 elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 96 elements
12:55:38 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 96 elements
12:55:38 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313984 (min) 0.314131 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340852 (min) 0.436849 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:38 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:38 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:38 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:38 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:38 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680088e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314097 (min) 0.314145 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346151 (min) 0.450363 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712244e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314085 (min) 0.314143 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346233 (min) 0.44956 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209568e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313999 (min) 0.314142 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350398 (min) 0.458562 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:38 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:38 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:38 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:38 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:38 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:38 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:38 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:38 DEBUG   opendrift.models.basemodel:2057:               -3.962325909152475e-20 <- latitude  -> 8.985981484039053e-06
12:55:38 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7964610954056805e-05
12:55:38 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:38 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4903 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026663976e-12 degrees.
12:55:38 DEBUG   opendrift.readers.basereader.variables:829: Masking 97 elements outside coverage
12:55:38 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 97 elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 97 elements
12:55:38 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 97 elements
12:55:38 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314099 (min) 0.313665 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350304 (min) 0.460585 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:38 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:38 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:38 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:38 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:38 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621125e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313849 (min) 0.313628 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352858 (min) 0.46711 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642568e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313793 (min) 0.313676 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352658 (min) 0.466406 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40565329163721e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313795 (min) 0.313743 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353541 (min) 0.468184 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:38 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:38 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:38 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:38 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:38 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:38 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:38 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:38 DEBUG   opendrift.models.basemodel:2057:               -3.217451069092804e-20 <- latitude  -> 8.983728322448785e-06
12:55:38 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7943703906907806e-05
12:55:38 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:38 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113118e-12 degrees.
12:55:38 DEBUG   opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
12:55:38 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 98 elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 98 elements
12:55:38 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 98 elements
12:55:38 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313997 (min) 0.313956 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353749 (min) 0.468821 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:38 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:38 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:38 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:38 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:38 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107683e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314104 (min) 0.314044 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352779 (min) 0.468032 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134586e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314084 (min) 0.314079 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352718 (min) 0.467801 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129114e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314122 (min) 0.314019 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35023 (min) 0.461998 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:38 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:38 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:38 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:38 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:38 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:38 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:38 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:38 DEBUG   opendrift.models.basemodel:2057:               -2.0818558712854728e-20 <- latitude  -> 8.986350946444513e-06
12:55:38 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.795024521099285e-05
12:55:38 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:38 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080246e-12 degrees.
12:55:38 DEBUG   opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
12:55:38 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 98 elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 98 elements
12:55:38 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 98 elements
12:55:38 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314035 (min) 0.3141 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350345 (min) 0.462487 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:38 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:38 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:38 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:38 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:38 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551434e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314127 (min) 0.314104 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346104 (min) 0.452533 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567505e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314112 (min) 0.314114 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346144 (min) 0.452474 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567505e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314042 (min) 0.314055 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340698 (min) 0.439621 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:38 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:38 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:38 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:38 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:38 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:38 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:38 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:38 DEBUG   opendrift.models.basemodel:2057:               -7.276475350328566e-21 <- latitude  -> 8.989048089968288e-06
12:55:38 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7964333319737994e-05
12:55:38 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:38 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4906 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546082e-12 degrees.
12:55:38 DEBUG   opendrift.readers.basereader.variables:829: Masking 94 elements outside coverage
12:55:38 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 94 elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 94 elements
12:55:38 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 94 elements
12:55:38 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313897 (min) 0.314101 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340582 (min) 0.439579 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:38 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:38 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:38 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:38 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:38 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043413e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313842 (min) 0.313875 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334431 (min) 0.424379 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048773e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313824 (min) 0.31399 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334512 (min) 0.424342 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048775e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314074 (min) 0.314017 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328474 (min) 0.405631 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:38 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:38 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:38 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:38 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:38 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:38 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:38 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:38 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.989977866517777e-06
12:55:38 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797317279011113e-05
12:55:38 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:38 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546111e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313988 (min) 0.313847 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328065 (min) 0.404183 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:38 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:38 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:38 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:38 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:38 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054163e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314138 (min) 0.31394 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322682 (min) 0.384568 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556847e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314138 (min) 0.313959 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3227 (min) 0.384513 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562204e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314107 (min) 0.314012 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31805 (min) 0.361859 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:38 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:38 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:38 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:38 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:38 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:38 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:38 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:38 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.98954768184466e-06
12:55:38 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797666228658526e-05
12:55:38 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:38 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075624e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314137 (min) 0.314131 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317917 (min) 0.361581 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:38 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:38 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:38 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:38 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:38 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589043e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31387 (min) 0.313817 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315069 (min) 0.338146 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091728e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313997 (min) 0.313803 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315122 (min) 0.33813 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594407e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31397 (min) 0.314027 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314115 (min) 0.314397 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:38 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:38 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:38 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:38 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:38 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:38 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:38 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:38 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.988785704010577e-06
12:55:38 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976770686481625e-05
12:55:38 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:38 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42521143011319e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313858 (min) 0.314133 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313862 (min) 0.314623 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:38 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:38 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:38 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:38 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:38 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:38 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118466e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314076 (min) 0.314104 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315199 (min) 0.33878 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129184e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314127 (min) 0.314092 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315197 (min) 0.338295 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626508e-12 degrees.
12:55:38 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:38 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:38 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314109 (min) 0.314085 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31819 (min) 0.362136 (max)
12:55:38 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:38 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:38 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:38 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:38 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:38 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:38 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:38 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:38 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:38 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:38 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.990082987816455e-06
12:55:38 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7980308578883705e-05
12:55:38 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:38 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:38 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:38 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:38 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:38 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:38 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621164e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314073 (min) 0.313928 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318241 (min) 0.362805 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:39 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:39 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:39 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:39 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:39 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:39 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:39 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621191e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313958 (min) 0.314133 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32261 (min) 0.384557 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123818e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313919 (min) 0.314127 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322822 (min) 0.385198 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123821e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314055 (min) 0.313868 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328391 (min) 0.406069 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:39 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:39 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:39 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:39 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:39 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:39 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:39 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:39 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:39 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:39 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.990308524751146e-06
12:55:39 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7982165696211727e-05
12:55:39 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:39 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118474e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314144 (min) 0.313884 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328617 (min) 0.406634 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:39 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:39 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:39 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:39 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:39 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:39 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:39 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118485e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314076 (min) 0.314153 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334767 (min) 0.423627 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621167e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314066 (min) 0.314155 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334911 (min) 0.422693 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621165e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314147 (min) 0.314085 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340857 (min) 0.438541 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:39 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:39 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:39 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:39 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:39 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:39 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:39 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:39 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:39 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:39 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.989865262394936e-06
12:55:39 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7983194220467624e-05
12:55:39 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:39 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621183e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313955 (min) 0.314001 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340809 (min) 0.440961 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:39 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:39 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:39 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:39 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:39 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:39 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:39 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631911e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314007 (min) 0.314129 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346273 (min) 0.451428 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631914e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314064 (min) 0.314158 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346321 (min) 0.450374 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631916e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314042 (min) 0.314017 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350226 (min) 0.45955 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:39 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:39 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:39 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:39 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:39 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:39 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:39 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:39 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:39 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:39 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.990131036064239e-06
12:55:39 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7983795708569242e-05
12:55:39 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:39 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139968e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314081 (min) 0.314091 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350387 (min) 0.463159 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:39 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:39 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:39 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:39 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:39 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:39 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:39 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785648024e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314032 (min) 0.314015 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352846 (min) 0.469012 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150704e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314111 (min) 0.314002 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353015 (min) 0.46889 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647377e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314114 (min) 0.314056 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353895 (min) 0.470755 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:39 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:39 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:39 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:39 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:39 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:39 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:39 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:39 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:39 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:39 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.990840830792127e-06
12:55:39 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798416468866272e-05
12:55:39 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:39 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139871e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31415 (min) 0.313999 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353725 (min) 0.470885 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:39 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:39 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:39 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:39 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:39 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:39 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:39 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626434e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31407 (min) 0.314121 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353028 (min) 0.468665 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129161e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314043 (min) 0.314131 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353004 (min) 0.468459 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129113e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314093 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350246 (min) 0.462676 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:39 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:39 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:39 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:39 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:39 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:39 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:39 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:39 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:07.500000
12:55:39 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:39 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:39 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:39 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:39 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:39 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:39 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:39 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:39 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:39 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:39 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:39 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:39 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:39 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:39 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:39 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:39 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:39 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:39 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:39 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:39 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:39 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:19.500000 to 2000-01-01 00:00:07.500000)
12:55:39 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:39 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:39 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:39 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:39 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:39 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:39 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:39 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:39 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:39 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:39 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:39 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:39 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:39 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:39 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314104 (min) 0.31414 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31834 (min) 0.363627 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:39 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:39 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:39 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:39 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:39 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:39 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:39 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610408e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31396 (min) 0.314156 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323091 (min) 0.38619 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621128e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314111 (min) 0.314152 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323062 (min) 0.386312 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621125e-12 degrees.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314075 (min) 0.314053 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328726 (min) 0.407239 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:39 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:39 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:39 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:39 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:39 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:39 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:39 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:39 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:39 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:39 DEBUG   opendrift.models.basemodel:2057:               -3.6917653338912486e-20 <- latitude  -> 8.888218129192535e-06
12:55:39 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.786508819092506e-05
12:55:39 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:39 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4983 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605059e-12 degrees.
12:55:39 DEBUG   opendrift.readers.basereader.variables:829: Masking 17 elements outside coverage
12:55:39 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 17 elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:39 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:39 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:39 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:39 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:39 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:39 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:39 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:39 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 17 elements
12:55:39 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 17 elements
12:55:39 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:39 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:39 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314092 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328785 (min) 0.407245 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:39 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:39 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:39 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:39 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:39 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:39 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:40 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:40 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:40 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102392e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313844 (min) 0.31402 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334949 (min) 0.42582 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107754e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313808 (min) 0.314044 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.335017 (min) 0.425858 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107752e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314067 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34108 (min) 0.441745 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:40 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:40 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:40 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:40 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:40 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:40 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:40 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:40 DEBUG   opendrift.models.basemodel:2057:               -2.9447375682816123e-20 <- latitude  -> 8.933049402613193e-06
12:55:40 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.789891307257404e-05
12:55:40 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:40 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4982 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107768e-12 degrees.
12:55:40 DEBUG   opendrift.readers.basereader.variables:829: Masking 18 elements outside coverage
12:55:40 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 18 elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 18 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 18 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314016 (min) 0.314101 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340768 (min) 0.441665 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:40 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:40 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:40 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:40 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:40 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42738455660981e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314067 (min) 0.314127 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345964 (min) 0.45302 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615819e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313916 (min) 0.314139 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346233 (min) 0.454075 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615818e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313769 (min) 0.314088 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350198 (min) 0.463379 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:40 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:40 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:40 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:40 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:40 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:40 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:40 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:40 DEBUG   opendrift.models.basemodel:2057:               -2.4198008114203143e-20 <- latitude  -> 8.959356274974082e-06
12:55:40 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7920187921455023e-05
12:55:40 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:40 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4980 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118511e-12 degrees.
12:55:40 DEBUG   opendrift.readers.basereader.variables:829: Masking 20 elements outside coverage
12:55:40 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 20 elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 20 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 20 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313778 (min) 0.314136 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350494 (min) 0.461037 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:40 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:40 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:40 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:40 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:40 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626565e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314038 (min) 0.314052 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352946 (min) 0.46783 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129243e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314072 (min) 0.314084 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3527 (min) 0.468896 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626565e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314098 (min) 0.314017 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353644 (min) 0.470708 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:40 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:40 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:40 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:40 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:40 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:40 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:40 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:40 DEBUG   opendrift.models.basemodel:2057:               -2.1228073626367513e-20 <- latitude  -> 8.974196432026582e-06
12:55:40 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7934973982568156e-05
12:55:40 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:40 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4978 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637296e-12 degrees.
12:55:40 DEBUG   opendrift.readers.basereader.variables:829: Masking 22 elements outside coverage
12:55:40 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 22 elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 22 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 22 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314074 (min) 0.313637 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353789 (min) 0.467972 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:40 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:40 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:40 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:40 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:40 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145353e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314117 (min) 0.314079 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352947 (min) 0.465258 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785648032e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31413 (min) 0.314049 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352837 (min) 0.464235 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150714e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313955 (min) 0.313704 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350238 (min) 0.458498 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:40 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:40 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:40 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:40 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:40 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:40 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:40 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:40 DEBUG   opendrift.models.basemodel:2057:               -2.209198827342351e-20 <- latitude  -> 8.982256048352061e-06
12:55:40 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7946368873478817e-05
12:55:40 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:40 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4974 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664125e-12 degrees.
12:55:40 DEBUG   opendrift.readers.basereader.variables:829: Masking 26 elements outside coverage
12:55:40 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 26 elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 26 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 26 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313868 (min) 0.313421 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350192 (min) 0.46072 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:40 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:40 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:40 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:40 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:40 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674869e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.3139 (min) 0.314098 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345742 (min) 0.452352 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680231e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313879 (min) 0.314135 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345655 (min) 0.452119 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.373056394177554e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314103 (min) 0.31382 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340688 (min) 0.439273 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:40 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:40 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:40 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:40 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:40 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:40 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:40 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:40 DEBUG   opendrift.models.basemodel:2057:               -2.4613372121645685e-20 <- latitude  -> 8.986766860764851e-06
12:55:40 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7955843354568316e-05
12:55:40 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:40 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4959 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382199016e-12 degrees.
12:55:40 DEBUG   opendrift.readers.basereader.variables:829: Masking 41 elements outside coverage
12:55:40 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 41 elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 41 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 41 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313546 (min) 0.314083 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340199 (min) 0.438842 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:40 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:40 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:40 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:40 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:40 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728521e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313459 (min) 0.314049 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334059 (min) 0.42276 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.329593864231214e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313499 (min) 0.313987 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334008 (min) 0.422593 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236567e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313539 (min) 0.314147 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328369 (min) 0.404056 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:40 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:40 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:40 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:40 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:40 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:40 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:40 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:40 DEBUG   opendrift.models.basemodel:2057:               -2.993120383444301e-20 <- latitude  -> 8.9893702478893e-06
12:55:40 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7963865006685475e-05
12:55:40 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:40 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4929 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.299170093268122e-12 degrees.
12:55:40 DEBUG   opendrift.readers.basereader.variables:829: Masking 71 elements outside coverage
12:55:40 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 71 elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 71 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 71 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314111 (min) 0.314158 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328252 (min) 0.40414 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:40 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:40 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:40 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:40 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:40 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.264400069311683e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313448 (min) 0.313951 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322502 (min) 0.383962 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.253534436825096e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31355 (min) 0.313881 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322472 (min) 0.383854 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.253534436825094e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314079 (min) 0.31415 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31795 (min) 0.361297 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:40 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:40 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:40 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:40 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:40 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:40 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:40 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:40 DEBUG   opendrift.models.basemodel:2057:               -3.682462786180163e-20 <- latitude  -> 8.990919749918408e-06
12:55:40 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7970299101904288e-05
12:55:40 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:40 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4915 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.212245033376063e-12 degrees.
12:55:40 DEBUG   opendrift.readers.basereader.variables:829: Masking 85 elements outside coverage
12:55:40 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 85 elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 85 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 85 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313756 (min) 0.314102 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31797 (min) 0.361216 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:40 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:40 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:40 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:40 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:40 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.153570617947862e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313673 (min) 0.314096 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315063 (min) 0.337137 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.136185605969946e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313639 (min) 0.314151 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315004 (min) 0.337329 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.134012479472628e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313935 (min) 0.314067 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313998 (min) 0.313874 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:40 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:40 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:40 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:40 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:40 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:40 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:40 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:40 DEBUG   opendrift.models.basemodel:2057:               -3.2540043819689864e-20 <- latitude  -> 8.99185390483152e-06
12:55:40 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7974747081156335e-05
12:55:40 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:40 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4909 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.118800593991004e-12 degrees.
12:55:40 DEBUG   opendrift.readers.basereader.variables:829: Masking 91 elements outside coverage
12:55:40 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 91 elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 91 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 91 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313921 (min) 0.314135 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314113 (min) 0.313084 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:40 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:40 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:40 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:40 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:40 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.166609376932035e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314029 (min) 0.314018 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314943 (min) 0.333112 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.144878111958833e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314039 (min) 0.313903 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314963 (min) 0.33245 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.14705123845616e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314023 (min) 0.314109 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318091 (min) 0.353751 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:40 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:40 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:40 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:40 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:40 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:40 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:40 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:40 DEBUG   opendrift.models.basemodel:2057:               -3.579145756859422e-20 <- latitude  -> 8.992396233125008e-06
12:55:40 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797674368064164e-05
12:55:40 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:40 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4906 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.203552527386479e-12 degrees.
12:55:40 DEBUG   opendrift.readers.basereader.variables:829: Masking 94 elements outside coverage
12:55:40 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 94 elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 94 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 94 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313811 (min) 0.314144 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318366 (min) 0.36293 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:40 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:40 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:40 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:40 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:40 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.253534436824787e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314141 (min) 0.314035 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322848 (min) 0.382871 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.227456918856985e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314138 (min) 0.313957 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322962 (min) 0.382416 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.233976298348912e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313865 (min) 0.314088 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32848 (min) 0.402467 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:40 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:40 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:40 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:40 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:40 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:40 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:40 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:40 DEBUG   opendrift.models.basemodel:2057:               -3.875225995977175e-20 <- latitude  -> 8.992672795315983e-06
12:55:40 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797559366609639e-05
12:55:40 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:40 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4904 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284598e-12 degrees.
12:55:40 DEBUG   opendrift.readers.basereader.variables:829: Masking 96 elements outside coverage
12:55:40 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 96 elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 96 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 96 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314048 (min) 0.313879 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32872 (min) 0.402846 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:40 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:40 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:40 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:40 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:40 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728313e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313635 (min) 0.313821 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334924 (min) 0.421771 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.307862599257792e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313676 (min) 0.313945 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334941 (min) 0.421126 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252434e-12 degrees.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314116 (min) 0.314126 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340974 (min) 0.436406 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:40 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:40 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:40 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:40 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:40 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:40 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:40 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:40 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:40 DEBUG   opendrift.models.basemodel:2057:               -3.977270062166446e-20 <- latitude  -> 8.992768593419992e-06
12:55:40 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796966361272857e-05
12:55:40 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:40 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4903 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.35567138219882e-12 degrees.
12:55:40 DEBUG   opendrift.readers.basereader.variables:829: Masking 97 elements outside coverage
12:55:40 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 97 elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:40 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:40 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:40 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:40 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:40 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:40 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:40 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 97 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 97 elements
12:55:40 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:40 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:40 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31402 (min) 0.313915 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340974 (min) 0.437999 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:40 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:40 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:40 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:40 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:40 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:41 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:41 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:41 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406155971e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313985 (min) 0.313943 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346266 (min) 0.451447 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36871014118277e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314007 (min) 0.314041 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346204 (min) 0.451141 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674735e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314026 (min) 0.314159 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35051 (min) 0.460213 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:41 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:41 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:41 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:41 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:41 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:41 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:41 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:41 DEBUG   opendrift.models.basemodel:2057:               -3.7149765760554815e-20 <- latitude  -> 8.992745918036112e-06
12:55:41 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7955209259412844e-05
12:55:41 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:41 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642526e-12 degrees.
12:55:41 DEBUG   opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
12:55:41 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 98 elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 98 elements
12:55:41 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 98 elements
12:55:41 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313932 (min) 0.314147 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350446 (min) 0.461102 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:41 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:41 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:41 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:41 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:41 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610235e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314042 (min) 0.313933 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352879 (min) 0.467428 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621109e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314068 (min) 0.313881 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353023 (min) 0.467438 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711843e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314025 (min) 0.313759 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353903 (min) 0.469226 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:41 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:41 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:41 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:41 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:41 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:41 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:41 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:41 DEBUG   opendrift.models.basemodel:2057:               -3.0028614291570355e-20 <- latitude  -> 8.99264517055583e-06
12:55:41 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7937102922477335e-05
12:55:41 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:41 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44476956858897e-12 degrees.
12:55:41 DEBUG   opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
12:55:41 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 98 elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 98 elements
12:55:41 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 98 elements
12:55:41 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314097 (min) 0.313845 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353801 (min) 0.468916 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:41 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:41 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:41 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:41 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:41 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583634e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31414 (min) 0.313755 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352676 (min) 0.466118 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091678e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314137 (min) 0.313706 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352864 (min) 0.466985 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091683e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313992 (min) 0.31395 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350234 (min) 0.461212 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:41 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:41 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:41 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:41 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:41 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:41 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:41 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:41 DEBUG   opendrift.models.basemodel:2057:               -1.9252342363527313e-20 <- latitude  -> 8.992804359755996e-06
12:55:41 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7956647342839935e-05
12:55:41 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:41 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594386e-12 degrees.
12:55:41 DEBUG   opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
12:55:41 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 98 elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 98 elements
12:55:41 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 98 elements
12:55:41 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314148 (min) 0.314144 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35025 (min) 0.461248 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:41 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:41 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:41 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:41 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:41 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113082e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313975 (min) 0.314139 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345915 (min) 0.452639 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631943e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314103 (min) 0.314144 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345926 (min) 0.452586 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129161e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314142 (min) 0.313974 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340254 (min) 0.439714 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:41 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:41 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:41 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:41 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:41 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:41 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:41 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:41 DEBUG   opendrift.models.basemodel:2057:               -6.178191842395173e-21 <- latitude  -> 8.992961529977289e-06
12:55:41 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796882306600799e-05
12:55:41 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:41 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4904 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599676e-12 degrees.
12:55:41 DEBUG   opendrift.readers.basereader.variables:829: Masking 96 elements outside coverage
12:55:41 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 96 elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 96 elements
12:55:41 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 96 elements
12:55:41 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314002 (min) 0.314065 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.339987 (min) 0.440144 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:41 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:41 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:41 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:41 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:41 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080934e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314021 (min) 0.313974 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.333956 (min) 0.423365 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097013e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313876 (min) 0.314008 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.333829 (min) 0.423212 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097013e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31386 (min) 0.313777 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3281 (min) 0.404616 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:41 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:41 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:41 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:41 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:41 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:41 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:41 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:41 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.993009932091567e-06
12:55:41 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797501874532125e-05
12:55:41 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:41 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572877e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314133 (min) 0.314096 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328466 (min) 0.403342 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:41 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:41 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:41 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:41 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:41 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556808e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313694 (min) 0.314141 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322717 (min) 0.383055 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070208e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313831 (min) 0.314134 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322673 (min) 0.383063 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064852e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314033 (min) 0.314047 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317965 (min) 0.360603 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:41 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:41 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:41 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:41 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:41 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:41 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:41 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:41 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992972141639244e-06
12:55:41 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7979372833440324e-05
12:55:41 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:41 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059466e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314132 (min) 0.314111 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318147 (min) 0.36182 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:41 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:41 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:41 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:41 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:41 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043398e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314126 (min) 0.314063 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315085 (min) 0.337996 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048756e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314146 (min) 0.31405 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315086 (min) 0.337928 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551436e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314066 (min) 0.314052 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313771 (min) 0.314503 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:41 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:41 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:41 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:41 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:41 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:41 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:41 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:41 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992856365415493e-06
12:55:41 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7980809315224565e-05
12:55:41 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:41 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043405e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314152 (min) 0.313723 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314154 (min) 0.314399 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:41 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:41 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:41 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:41 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:41 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540734e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314026 (min) 0.313825 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314921 (min) 0.338767 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043414e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313955 (min) 0.313796 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315076 (min) 0.338382 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546095e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314061 (min) 0.314122 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317852 (min) 0.362115 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:41 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:41 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:41 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:41 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:41 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:41 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:41 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:41 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992716427077337e-06
12:55:41 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7980710659173782e-05
12:55:41 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:41 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043384e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314124 (min) 0.313776 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318073 (min) 0.361698 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:41 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:41 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:41 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:41 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:41 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032669e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314007 (min) 0.313844 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32286 (min) 0.384395 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529992e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313859 (min) 0.313825 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322909 (min) 0.385306 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032669e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314083 (min) 0.314112 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328689 (min) 0.406241 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:41 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:41 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:41 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:41 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:41 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:41 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:41 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:41 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992695907320964e-06
12:55:41 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7979697244298622e-05
12:55:41 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:41 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027311e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31403 (min) 0.313992 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328593 (min) 0.406413 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:41 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:41 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:41 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:41 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:41 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.496924604524634e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.313941 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334686 (min) 0.42444 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529995e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314141 (min) 0.314031 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33488 (min) 0.424903 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49475147802666e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313981 (min) 0.314043 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340718 (min) 0.440771 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:41 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:41 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:41 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:41 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:41 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:41 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:41 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:41 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992564710889796e-06
12:55:41 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7978675986605596e-05
12:55:41 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:41 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519278e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313933 (min) 0.314054 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340492 (min) 0.440265 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:41 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:41 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:41 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:41 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:41 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49909773102196e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314092 (min) 0.314013 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346294 (min) 0.453388 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.499097731021959e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314047 (min) 0.314095 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346335 (min) 0.453716 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.496924604524636e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314036 (min) 0.313977 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350377 (min) 0.463041 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:41 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:41 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:41 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:41 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:41 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:41 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:41 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:41 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992357177306386e-06
12:55:41 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7979840700064253e-05
12:55:41 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:41 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519283e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31405 (min) 0.314079 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350353 (min) 0.463022 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:41 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:41 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:41 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:41 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:41 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:41 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.499097731021964e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314136 (min) 0.313891 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352987 (min) 0.468934 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519291e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314155 (min) 0.314056 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353048 (min) 0.468743 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.499097731021968e-12 degrees.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314157 (min) 0.314011 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353842 (min) 0.470606 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:41 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:41 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:41 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:41 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:41 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:41 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:41 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:41 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:41 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:41 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:41 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:41 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:41 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:41 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:41 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:41 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:41 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:41 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:42 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:42 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:08
12:55:42 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:42 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:42 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:42 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:42 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:42 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:42 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:42 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:42 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:42 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:42 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:42 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:42 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:42 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:42 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:42 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:42 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:42 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:42 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:42 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:42 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:42 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:20 to 2000-01-01 00:00:08)
12:55:42 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:42 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:42 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:42 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:42 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:42 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:42 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:42 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:42 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:20 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:42 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:42 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:42 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:42 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:42 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:42 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314157 (min) 0.314157 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314155 (min) 0.31516 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:42 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:42 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:42 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:42 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:42 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:42 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:42 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42738455661041e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314133 (min) 0.314107 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315172 (min) 0.33969 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118448e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314059 (min) 0.314095 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31518 (min) 0.339659 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118451e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314056 (min) 0.314118 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318337 (min) 0.363574 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:42 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:42 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:42 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:42 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:42 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:42 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:42 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:42 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:42 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:42 DEBUG   opendrift.models.basemodel:2057:               -4.5471472522404856e-20 <- latitude  -> 8.88670794911032e-06
12:55:42 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7874254008950953e-05
12:55:42 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:42 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4980 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605064e-12 degrees.
12:55:42 DEBUG   opendrift.readers.basereader.variables:829: Masking 20 elements outside coverage
12:55:42 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 20 elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 20 elements
12:55:42 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 20 elements
12:55:42 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314013 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318213 (min) 0.363614 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:42 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:42 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:42 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:42 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:42 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:42 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:42 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605078e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314057 (min) 0.314013 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322881 (min) 0.386133 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107762e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314148 (min) 0.314039 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322973 (min) 0.386329 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107764e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313868 (min) 0.314142 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32875 (min) 0.407256 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:42 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:42 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:42 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:42 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:42 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:42 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:42 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:42 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:42 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:42 DEBUG   opendrift.models.basemodel:2057:               -3.767037405972553e-20 <- latitude  -> 8.93062974628554e-06
12:55:42 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7910604773716007e-05
12:55:42 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:42 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4978 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610457e-12 degrees.
12:55:42 DEBUG   opendrift.readers.basereader.variables:829: Masking 22 elements outside coverage
12:55:42 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 22 elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 22 elements
12:55:42 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 22 elements
12:55:42 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31413 (min) 0.313981 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328808 (min) 0.407252 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:42 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:42 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:42 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:42 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:42 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:42 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:42 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118512e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314073 (min) 0.314101 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334971 (min) 0.424724 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621191e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313932 (min) 0.314093 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.335066 (min) 0.425583 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621193e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314018 (min) 0.314064 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34078 (min) 0.441471 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:42 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:42 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:42 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:42 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:42 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:42 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:42 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:42 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:42 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:42 DEBUG   opendrift.models.basemodel:2057:               -3.0397751171926555e-20 <- latitude  -> 8.957011752418704e-06
12:55:42 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.793157468668128e-05
12:55:42 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:42 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4979 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129248e-12 degrees.
12:55:42 DEBUG   opendrift.readers.basereader.variables:829: Masking 21 elements outside coverage
12:55:42 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 21 elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 21 elements
12:55:42 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 21 elements
12:55:42 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314006 (min) 0.314151 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341062 (min) 0.440697 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:42 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:42 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:42 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:42 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:42 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:42 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:42 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637304e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314103 (min) 0.313749 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346374 (min) 0.454295 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139986e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313972 (min) 0.313734 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346379 (min) 0.453772 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637307e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313541 (min) 0.314146 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350422 (min) 0.463064 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:42 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:42 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:42 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:42 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:42 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:42 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:42 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:42 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:42 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:42 DEBUG   opendrift.models.basemodel:2057:               -2.317379140630761e-20 <- latitude  -> 8.972753966465302e-06
12:55:42 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7944726644424088e-05
12:55:42 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:42 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4982 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653402e-12 degrees.
12:55:42 DEBUG   opendrift.readers.basereader.variables:829: Masking 18 elements outside coverage
12:55:42 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 18 elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 18 elements
12:55:42 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 18 elements
12:55:42 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314067 (min) 0.314153 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350421 (min) 0.461012 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:42 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:42 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:42 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:42 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:42 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:42 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:42 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773668854e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.311953 (min) 0.313879 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35307 (min) 0.469132 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773668854e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.311614 (min) 0.313852 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353088 (min) 0.468646 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37740264717218e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.311523 (min) 0.313958 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353974 (min) 0.470448 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:42 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:42 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:42 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:42 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:42 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:42 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:42 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:42 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:42 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:42 DEBUG   opendrift.models.basemodel:2057:               -2.2447276415173603e-20 <- latitude  -> 8.981899964638629e-06
12:55:42 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.795382703343518e-05
12:55:42 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:42 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4983 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.366537014684959e-12 degrees.
12:55:42 DEBUG   opendrift.readers.basereader.variables:829: Masking 17 elements outside coverage
12:55:42 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 17 elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 17 elements
12:55:42 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 17 elements
12:55:42 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314088 (min) 0.314037 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353817 (min) 0.464502 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:42 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:42 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:42 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:42 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:42 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:42 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:42 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.349152002707062e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31367 (min) 0.313486 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352746 (min) 0.46851 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712423e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313497 (min) 0.313334 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352834 (min) 0.468195 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749711778e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313553 (min) 0.313536 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350144 (min) 0.462341 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:42 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:42 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:42 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:42 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:42 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:42 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:42 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:42 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:42 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:42 DEBUG   opendrift.models.basemodel:2057:               -1.923140390512809e-20 <- latitude  -> 8.986960579977888e-06
12:55:42 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796078955069554e-05
12:55:42 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:42 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4979 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.329593864231214e-12 degrees.
12:55:42 DEBUG   opendrift.readers.basereader.variables:829: Masking 21 elements outside coverage
12:55:42 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 21 elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 21 elements
12:55:42 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 21 elements
12:55:42 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313478 (min) 0.313838 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350185 (min) 0.460994 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:42 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:42 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:42 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:42 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:42 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:42 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:42 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472760719e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313522 (min) 0.313899 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346101 (min) 0.451527 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.296996966771442e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313493 (min) 0.314033 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346076 (min) 0.451247 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29917009326876e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313437 (min) 0.313967 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34049 (min) 0.438472 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:42 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:42 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:42 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:42 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:42 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:42 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:42 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:42 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:42 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:42 DEBUG   opendrift.models.basemodel:2057:               -2.2433970271509962e-20 <- latitude  -> 8.989683896463659e-06
12:55:42 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7966501960168655e-05
12:55:42 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:42 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4960 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.273092575300955e-12 degrees.
12:55:42 DEBUG   opendrift.readers.basereader.variables:829: Masking 40 elements outside coverage
12:55:42 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 40 elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 40 elements
12:55:42 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 40 elements
12:55:42 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313878 (min) 0.313988 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340497 (min) 0.438705 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:42 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:42 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:42 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:42 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:42 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:42 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:42 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.240495677840557e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314092 (min) 0.313791 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334554 (min) 0.422539 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.231803171851285e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314096 (min) 0.313997 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334582 (min) 0.422611 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.2296300453546e-12 degrees.
12:55:42 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:42 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:42 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313995 (min) 0.314148 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328367 (min) 0.40406 (max)
12:55:42 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:42 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:42 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:42 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:42 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:42 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:42 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:42 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:42 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:42 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:42 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:42 DEBUG   opendrift.models.basemodel:2057:               -2.6898719966936044e-20 <- latitude  -> 8.991022604573997e-06
12:55:42 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797120423935492e-05
12:55:42 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:42 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:42 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:42 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:42 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:42 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4921 elements
12:55:42 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:42 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.192686894900207e-12 degrees.
12:55:43 DEBUG   opendrift.readers.basereader.variables:829: Masking 79 elements outside coverage
12:55:43 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 79 elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 79 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 79 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313778 (min) 0.31342 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328281 (min) 0.404716 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:43 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:43 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:43 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:43 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:43 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.140531858964585e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31388 (min) 0.313963 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322723 (min) 0.38317 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.12531997348335e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313814 (min) 0.313809 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322708 (min) 0.383047 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.123146846986037e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313587 (min) 0.314074 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31775 (min) 0.36062 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:43 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:43 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:43 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:43 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:43 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:43 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:43 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:43 DEBUG   opendrift.models.basemodel:2057:               -2.742853081303683e-20 <- latitude  -> 8.991455340501333e-06
12:55:43 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797471725429966e-05
12:55:43 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:43 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4910 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.123146846985698e-12 degrees.
12:55:43 DEBUG   opendrift.readers.basereader.variables:829: Masking 90 elements outside coverage
12:55:43 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 90 elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 90 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 90 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313641 (min) 0.314002 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317226 (min) 0.361532 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:43 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:43 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:43 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:43 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:43 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.153570617948149e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313918 (min) 0.314015 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314971 (min) 0.337272 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.140531858964213e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313911 (min) 0.314121 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314952 (min) 0.337451 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.138358732466866e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314031 (min) 0.314124 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313863 (min) 0.313066 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:43 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:43 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:43 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:43 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:43 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:43 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:43 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:43 DEBUG   opendrift.models.basemodel:2057:               -3.0111186338776083e-20 <- latitude  -> 8.991213924587686e-06
12:55:43 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976605897479218e-05
12:55:43 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:43 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4906 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.179648135915977e-12 degrees.
12:55:43 DEBUG   opendrift.readers.basereader.variables:829: Masking 94 elements outside coverage
12:55:43 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 94 elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 94 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 94 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313689 (min) 0.314159 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314043 (min) 0.313111 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:43 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:43 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:43 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:43 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:43 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.218764412867705e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314104 (min) 0.314044 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315087 (min) 0.338551 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.203552527386467e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.3141 (min) 0.314131 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315024 (min) 0.338368 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.20572565388379e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313945 (min) 0.314114 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318297 (min) 0.361712 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:43 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:43 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:43 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:43 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:43 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:43 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:43 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:43 DEBUG   opendrift.models.basemodel:2057:               -3.410960054054438e-20 <- latitude  -> 8.990437420026209e-06
12:55:43 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797618150579991e-05
12:55:43 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:43 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4904 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.249188183830167e-12 degrees.
12:55:43 DEBUG   opendrift.readers.basereader.variables:829: Masking 96 elements outside coverage
12:55:43 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 96 elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 96 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 96 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31398 (min) 0.314121 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318292 (min) 0.361235 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:43 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:43 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:43 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:43 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:43 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.290477587279262e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314062 (min) 0.31403 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323014 (min) 0.383362 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195808742e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314062 (min) 0.314019 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322984 (min) 0.383131 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.273092575300705e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31388 (min) 0.313915 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32859 (min) 0.403339 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:43 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:43 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:43 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:43 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:43 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:43 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:43 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:43 DEBUG   opendrift.models.basemodel:2057:               -3.7348599298691565e-20 <- latitude  -> 8.989857622121372e-06
12:55:43 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797212920397878e-05
12:55:43 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:43 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4903 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.318728231744377e-12 degrees.
12:55:43 DEBUG   opendrift.readers.basereader.variables:829: Masking 97 elements outside coverage
12:55:43 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 97 elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 97 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 97 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313904 (min) 0.313477 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328502 (min) 0.404003 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:43 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:43 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:43 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:43 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:43 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696174e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31414 (min) 0.314066 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334811 (min) 0.422706 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.338286370220293e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31414 (min) 0.314031 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334646 (min) 0.422582 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.338286370220298e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314118 (min) 0.313744 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340975 (min) 0.438038 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:43 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:43 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:43 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:43 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:43 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:43 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:43 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:43 DEBUG   opendrift.models.basemodel:2057:               -3.859486138434918e-20 <- latitude  -> 8.990669101348641e-06
12:55:43 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796162190552424e-05
12:55:43 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:43 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773669353e-12 degrees.
12:55:43 DEBUG   opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
12:55:43 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 98 elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 98 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 98 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314053 (min) 0.314153 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.339385 (min) 0.438891 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:43 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:43 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:43 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:43 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:43 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40565329163722e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314022 (min) 0.314095 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34546 (min) 0.452293 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406155982e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313958 (min) 0.314046 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345738 (min) 0.451666 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653305e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314128 (min) 0.314015 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350066 (min) 0.460806 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:43 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:43 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:43 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:43 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:43 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:43 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:43 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:43 DEBUG   opendrift.models.basemodel:2057:               -3.611061376212408e-20 <- latitude  -> 8.99170360664222e-06
12:55:43 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7938597484892216e-05
12:55:43 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:43 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626448e-12 degrees.
12:55:43 DEBUG   opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
12:55:43 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 98 elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 98 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 98 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313865 (min) 0.314118 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.349928 (min) 0.461914 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:43 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:43 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:43 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:43 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:43 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086263e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313955 (min) 0.313869 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352405 (min) 0.466557 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610381e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313995 (min) 0.3139 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3526 (min) 0.465856 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102345e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31391 (min) 0.313938 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353271 (min) 0.46772 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:43 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:43 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:43 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:43 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:43 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:43 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:43 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:43 DEBUG   opendrift.models.basemodel:2057:               -2.924145364069869e-20 <- latitude  -> 8.992226021256883e-06
12:55:43 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.79459066657851e-05
12:55:43 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:43 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572884e-12 degrees.
12:55:43 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:43 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314091 (min) 0.313631 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353944 (min) 0.469117 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:43 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:43 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:43 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:43 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:43 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567539e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313706 (min) 0.31379 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353044 (min) 0.467825 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578265e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313736 (min) 0.313864 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353035 (min) 0.467289 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578269e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313948 (min) 0.313937 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350237 (min) 0.461499 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:43 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:43 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:43 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:43 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:43 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:43 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:43 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:43 DEBUG   opendrift.models.basemodel:2057:               -1.868227048219225e-20 <- latitude  -> 8.992352155611402e-06
12:55:43 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796220313023868e-05
12:55:43 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:43 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572924e-12 degrees.
12:55:43 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:43 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314124 (min) 0.313664 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35024 (min) 0.462462 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:43 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:43 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:43 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:43 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:43 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583668e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314074 (min) 0.314112 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345699 (min) 0.452981 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097075e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314106 (min) 0.314098 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345785 (min) 0.452722 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599755e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314014 (min) 0.314121 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340551 (min) 0.439835 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:43 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:43 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:43 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:43 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:43 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:43 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:43 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:43 DEBUG   opendrift.models.basemodel:2057:               -5.783738231481867e-21 <- latitude  -> 8.992079987395687e-06
12:55:43 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7971857437848422e-05
12:55:43 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:43 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4903 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594304e-12 degrees.
12:55:43 DEBUG   opendrift.readers.basereader.variables:829: Masking 97 elements outside coverage
12:55:43 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 97 elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 97 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 97 elements
12:55:43 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314157 (min) 0.313912 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34075 (min) 0.439794 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:43 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:43 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:43 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:43 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:43 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070195e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314109 (min) 0.313974 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334554 (min) 0.422334 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583592e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314129 (min) 0.314016 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334573 (min) 0.422883 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080915e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314138 (min) 0.314112 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328358 (min) 0.404239 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:43 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:43 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:43 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:43 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:43 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:43 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:43 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:43 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:43 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.991614103908642e-06
12:55:43 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976309596203e-05
12:55:43 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:43 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064852e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314145 (min) 0.314075 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328064 (min) 0.405389 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:43 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:43 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:43 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:43 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:43 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:43 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46867396005951e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314085 (min) 0.31382 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322384 (min) 0.384245 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:43 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:43 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070224e-12 degrees.
12:55:43 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:43 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:43 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31411 (min) 0.313811 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322322 (min) 0.384271 (max)
12:55:43 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:43 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:43 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:43 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567549e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313937 (min) 0.314081 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317689 (min) 0.361584 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:44 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:44 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:44 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:44 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:44 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:44 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:44 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:44 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:44 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:44 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992049827358464e-06
12:55:44 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7980593266952756e-05
12:55:44 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:44 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45780832757292e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31408 (min) 0.314132 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31814 (min) 0.361182 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:44 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:44 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:44 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:44 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:44 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:44 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:44 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44911582158366e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314021 (min) 0.313914 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31498 (min) 0.33818 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583663e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314086 (min) 0.31388 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314983 (min) 0.3382 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583663e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313926 (min) 0.314075 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313138 (min) 0.314623 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:44 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:44 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:44 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:44 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:44 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:44 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:44 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:44 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:44 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:44 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992027697811668e-06
12:55:44 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7982320684971692e-05
12:55:44 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:44 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080892e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314146 (min) 0.314085 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31358 (min) 0.314542 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:44 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:44 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:44 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:44 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:44 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:44 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:44 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059461e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314145 (min) 0.314101 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315157 (min) 0.339114 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567497e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314094 (min) 0.314093 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315072 (min) 0.339143 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567495e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313901 (min) 0.313606 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317974 (min) 0.363033 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:44 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:44 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:44 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:44 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:44 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:44 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:44 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:44 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:44 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:44 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.991654502763399e-06
12:55:44 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7982800199733198e-05
12:55:44 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:44 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551425e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314062 (min) 0.314099 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318261 (min) 0.362557 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:44 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:44 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:44 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:44 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:44 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:44 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:44 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043389e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313839 (min) 0.313807 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322732 (min) 0.385505 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546067e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314003 (min) 0.313877 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3227 (min) 0.385125 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546066e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313962 (min) 0.314155 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328727 (min) 0.40598 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:44 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:44 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:44 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:44 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:44 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:44 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:44 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:44 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:44 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:44 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.991017470490114e-06
12:55:44 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798260188427432e-05
12:55:44 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:44 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038033e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313759 (min) 0.314081 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328523 (min) 0.406193 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:44 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:44 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:44 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:44 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:44 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:44 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:44 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032675e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314046 (min) 0.31386 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334918 (min) 0.425023 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038036e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314083 (min) 0.31387 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33496 (min) 0.424828 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535357e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313902 (min) 0.313961 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.339957 (min) 0.440686 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:44 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:44 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:44 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:44 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:44 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:44 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:44 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:44 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:44 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:44 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.990295531412466e-06
12:55:44 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798200126580133e-05
12:55:44 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:44 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535357e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314071 (min) 0.314091 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340078 (min) 0.439563 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:44 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:44 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:44 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:44 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:44 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:44 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:44 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.496924604524646e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313981 (min) 0.314079 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346294 (min) 0.453528 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027328e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314018 (min) 0.314086 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346216 (min) 0.453288 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032685e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314117 (min) 0.313707 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350349 (min) 0.462586 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:44 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:44 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:44 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:44 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:44 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:44 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:44 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:44 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:08.500000
12:55:44 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:44 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:44 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:44 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:44 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:44 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:44 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:44 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:44 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:44 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:44 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:44 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:44 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:44 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:44 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:44 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:44 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:44 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:44 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:44 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:44 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:44 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:20.500000 to 2000-01-01 00:00:08.500000)
12:55:44 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:44 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:44 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:44 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:44 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:44 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:44 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:44 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:44 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:20.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:44 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:44 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:44 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:44 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:44 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:44 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:44 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:44 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:44 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:44 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:44 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:44 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:44 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:44 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:44 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:44 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.314059 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317928 (min) 0.359831 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:44 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:44 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:44 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:44 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:44 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:44 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:45 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:45 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:45 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107733e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314109 (min) 0.314125 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315099 (min) 0.336532 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615772e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314036 (min) 0.314108 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315091 (min) 0.336444 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118454e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.314145 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314151 (min) 0.315085 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:45 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:45 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:45 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:45 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:45 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:45 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:20 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:45 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:45 DEBUG   opendrift.models.basemodel:2057:               -5.306771897488783e-20 <- latitude  -> 8.886640273542638e-06
12:55:45 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7883380740029553e-05
12:55:45 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:45 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4976 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43173080960507e-12 degrees.
12:55:45 DEBUG   opendrift.readers.basereader.variables:829: Masking 24 elements outside coverage
12:55:45 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 24 elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 24 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 24 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314043 (min) 0.314039 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313889 (min) 0.315159 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:45 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:45 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:45 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:45 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:45 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605088e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313827 (min) 0.314052 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315147 (min) 0.339609 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556609801e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31402 (min) 0.314078 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314988 (min) 0.339564 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113129e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313934 (min) 0.314102 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31835 (min) 0.363476 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:45 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:45 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:45 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:45 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:45 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:45 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:45 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:45 DEBUG   opendrift.models.basemodel:2057:               -4.546270993245136e-20 <- latitude  -> 8.929487090436316e-06
12:55:45 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7921987161321287e-05
12:55:45 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:45 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4975 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42303830361583e-12 degrees.
12:55:45 DEBUG   opendrift.readers.basereader.variables:829: Masking 25 elements outside coverage
12:55:45 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 25 elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 25 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 25 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314156 (min) 0.313943 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318296 (min) 0.363337 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:45 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:45 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:45 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:45 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:45 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626568e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313922 (min) 0.314158 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322913 (min) 0.386252 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129253e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313995 (min) 0.314156 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32272 (min) 0.385896 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129252e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313992 (min) 0.314159 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32872 (min) 0.406805 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:45 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:45 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:45 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:45 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:45 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:45 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:45 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:45 DEBUG   opendrift.models.basemodel:2057:               -3.74415974847826e-20 <- latitude  -> 8.955100391402892e-06
12:55:45 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7942644123538773e-05
12:55:45 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:45 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4977 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642673e-12 degrees.
12:55:45 DEBUG   opendrift.readers.basereader.variables:829: Masking 23 elements outside coverage
12:55:45 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 23 elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 23 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 23 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314035 (min) 0.31386 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328509 (min) 0.405985 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:45 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:45 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:45 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:45 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:45 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166815e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314024 (min) 0.314004 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33501 (min) 0.425652 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166817e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314083 (min) 0.31404 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.335039 (min) 0.425119 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166815e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313603 (min) 0.314153 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341036 (min) 0.440989 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:45 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:45 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:45 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:45 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:45 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:45 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:45 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:45 DEBUG   opendrift.models.basemodel:2057:               -2.865851102278055e-20 <- latitude  -> 8.970841772665477e-06
12:55:45 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7954490634132458e-05
12:55:45 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:45 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4982 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.364363888187636e-12 degrees.
12:55:45 DEBUG   opendrift.readers.basereader.variables:829: Masking 18 elements outside coverage
12:55:45 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 18 elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 18 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 18 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313421 (min) 0.314083 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340913 (min) 0.437142 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:45 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:45 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:45 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:45 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:45 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712425e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313777 (min) 0.314124 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346358 (min) 0.446163 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.34480574971178e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313548 (min) 0.314128 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346203 (min) 0.446379 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712425e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313197 (min) 0.314034 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350218 (min) 0.455834 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:45 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:45 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:45 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:45 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:45 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:45 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:45 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:45 DEBUG   opendrift.models.basemodel:2057:               -2.2780755555936557e-20 <- latitude  -> 8.980561361275847e-06
12:55:45 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7961849988590017e-05
12:55:45 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:45 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4985 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.327420737733896e-12 degrees.
12:55:45 DEBUG   opendrift.readers.basereader.variables:829: Masking 15 elements outside coverage
12:55:45 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 15 elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 15 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 15 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31351 (min) 0.313974 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350212 (min) 0.459447 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:45 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:45 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:45 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:45 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:45 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.301343219766083e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314021 (min) 0.313741 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353134 (min) 0.461347 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.299170093268762e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313942 (min) 0.313737 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353059 (min) 0.461353 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.296996966770804e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313927 (min) 0.313718 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353911 (min) 0.463435 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:45 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:45 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:45 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:45 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:45 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:45 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:45 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:45 DEBUG   opendrift.models.basemodel:2057:               -2.041449514295197e-20 <- latitude  -> 8.986208519436306e-06
12:55:45 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796686569016933e-05
12:55:45 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:45 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4988 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.273092575300952e-12 degrees.
12:55:45 DEBUG   opendrift.readers.basereader.variables:829: Masking 12 elements outside coverage
12:55:45 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 12 elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 12 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 12 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313543 (min) 0.31365 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353675 (min) 0.469335 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:45 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:45 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:45 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:45 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:45 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057333145e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313695 (min) 0.314137 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352865 (min) 0.466405 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.249188183829834e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313695 (min) 0.314124 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352817 (min) 0.465821 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24701505733315e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313639 (min) 0.314098 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350131 (min) 0.460031 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:45 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:45 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:45 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:45 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:45 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:45 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:45 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:45 DEBUG   opendrift.models.basemodel:2057:               -2.0569061426922376e-20 <- latitude  -> 8.989337956704734e-06
12:55:45 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7970607563394457e-05
12:55:45 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:45 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4985 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.21007190687874e-12 degrees.
12:55:45 DEBUG   opendrift.readers.basereader.variables:829: Masking 15 elements outside coverage
12:55:45 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 15 elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 15 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 15 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314056 (min) 0.313864 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.349943 (min) 0.460531 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:45 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:45 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:45 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:45 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:45 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.173128756424344e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313678 (min) 0.314042 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345971 (min) 0.451184 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.16878250342971e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313686 (min) 0.314098 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346036 (min) 0.451116 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.170955629927031e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314155 (min) 0.313885 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340522 (min) 0.438344 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:45 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:45 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:45 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:45 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:45 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:45 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:45 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:45 DEBUG   opendrift.models.basemodel:2057:               -1.8443864154749993e-20 <- latitude  -> 8.991039366590399e-06
12:55:45 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7973535251931047e-05
12:55:45 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:45 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4964 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.1405318589643e-12 degrees.
12:55:45 DEBUG   opendrift.readers.basereader.variables:829: Masking 36 elements outside coverage
12:55:45 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 36 elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 36 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 36 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313826 (min) 0.313875 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340517 (min) 0.438236 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:45 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:45 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:45 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:45 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:45 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.149224364953528e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31379 (min) 0.314056 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334329 (min) 0.423052 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.142704985460945e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313849 (min) 0.314035 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334358 (min) 0.423059 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.142704985461596e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31395 (min) 0.313978 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.327906 (min) 0.404465 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:45 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:45 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:45 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:45 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:45 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:45 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:45 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:45 DEBUG   opendrift.models.basemodel:2057:               -2.3714451427169467e-20 <- latitude  -> 8.991909831277573e-06
12:55:45 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7975696580451567e-05
12:55:45 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:45 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4914 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.157916870942813e-12 degrees.
12:55:45 DEBUG   opendrift.readers.basereader.variables:829: Masking 86 elements outside coverage
12:55:45 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 86 elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 86 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 86 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313671 (min) 0.31368 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328247 (min) 0.403019 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:45 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:45 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:45 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:45 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:45 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.177475009418673e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314028 (min) 0.314049 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322716 (min) 0.38417 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.164436250434781e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314016 (min) 0.31414 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322701 (min) 0.384103 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.16443625043476e-12 degrees.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313934 (min) 0.313543 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318025 (min) 0.361471 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:45 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:45 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:45 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:45 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:45 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:45 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:45 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:45 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:45 DEBUG   opendrift.models.basemodel:2057:               -2.4862942205913873e-20 <- latitude  -> 8.99225247907864e-06
12:55:45 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976818382557805e-05
12:55:45 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:45 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4906 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.192686894899916e-12 degrees.
12:55:45 DEBUG   opendrift.readers.basereader.variables:829: Masking 94 elements outside coverage
12:55:45 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 94 elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:45 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:45 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 94 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 94 elements
12:55:45 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:45 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314107 (min) 0.314156 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318022 (min) 0.361586 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:45 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:45 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:45 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:45 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:45 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:45 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:45 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:45 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:45 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:45 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:45 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:45 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:45 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:45 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.216591286370403e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313843 (min) 0.314148 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315128 (min) 0.337826 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.203552527386517e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313798 (min) 0.314117 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315143 (min) 0.337784 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.2078987803811e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314068 (min) 0.31394 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314077 (min) 0.314597 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:46 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:46 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:46 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:46 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:46 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:46 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:46 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:46 DEBUG   opendrift.models.basemodel:2057:               -2.8373462236699596e-20 <- latitude  -> 8.992217930198127e-06
12:55:46 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976305201370726e-05
12:55:46 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:46 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4904 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.240495677840916e-12 degrees.
12:55:46 DEBUG   opendrift.readers.basereader.variables:829: Masking 96 elements outside coverage
12:55:46 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 96 elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 96 elements
12:55:46 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 96 elements
12:55:46 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314103 (min) 0.314027 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314011 (min) 0.314441 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:46 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:46 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:46 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:46 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:46 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195808128e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313912 (min) 0.314062 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314516 (min) 0.338407 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.253534436824813e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313884 (min) 0.313986 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314784 (min) 0.338207 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.253534436824818e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313991 (min) 0.313671 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318314 (min) 0.36151 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:46 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:46 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:46 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:46 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:46 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:46 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:46 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:46 DEBUG   opendrift.models.basemodel:2057:               -3.270694441628009e-20 <- latitude  -> 8.99189282374356e-06
12:55:46 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7973028914175503e-05
12:55:46 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:46 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4903 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.292650713776581e-12 degrees.
12:55:46 DEBUG   opendrift.readers.basereader.variables:829: Masking 97 elements outside coverage
12:55:46 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 97 elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 97 elements
12:55:46 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 97 elements
12:55:46 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314088 (min) 0.31413 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318281 (min) 0.361591 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:46 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:46 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:46 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:46 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:46 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.323074484739062e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314105 (min) 0.3141 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322918 (min) 0.384259 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472760504e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314097 (min) 0.31411 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322954 (min) 0.383863 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755147e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313968 (min) 0.31409 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32862 (min) 0.404275 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:46 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:46 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:46 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:46 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:46 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:46 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:46 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:46 DEBUG   opendrift.models.basemodel:2057:               -3.6349179975167544e-20 <- latitude  -> 8.99182551859317e-06
12:55:46 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7964714269957518e-05
12:55:46 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:46 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209576e-12 degrees.
12:55:46 DEBUG   opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
12:55:46 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 98 elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 98 elements
12:55:46 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 98 elements
12:55:46 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313949 (min) 0.314054 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328583 (min) 0.404632 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:46 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:46 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:46 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:46 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:46 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773669358e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314063 (min) 0.314085 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334857 (min) 0.423811 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690793e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314105 (min) 0.314115 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334954 (min) 0.423349 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.364363888188116e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314145 (min) 0.313964 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340913 (min) 0.438942 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:46 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:46 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:46 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:46 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:46 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:46 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:46 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:46 DEBUG   opendrift.models.basemodel:2057:               -3.770084968922349e-20 <- latitude  -> 8.992376484655339e-06
12:55:46 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.794656706916359e-05
12:55:46 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:46 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150625e-12 degrees.
12:55:46 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:46 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:46 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:46 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314126 (min) 0.314126 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340844 (min) 0.438415 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:46 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:46 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:46 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:46 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:46 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615738e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314154 (min) 0.313852 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346132 (min) 0.451394 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637173e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314125 (min) 0.313771 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346098 (min) 0.45118 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134494e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314126 (min) 0.31408 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35049 (min) 0.460406 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:46 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:46 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:46 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:46 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:46 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:46 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:46 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:46 DEBUG   opendrift.models.basemodel:2057:               -3.554574574598845e-20 <- latitude  -> 8.99264899141808e-06
12:55:46 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.793283587515614e-05
12:55:46 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:46 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189096999e-12 degrees.
12:55:46 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:46 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:46 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:46 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313718 (min) 0.314111 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350509 (min) 0.462137 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:46 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:46 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:46 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:46 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:46 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578259e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.3141 (min) 0.314147 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353136 (min) 0.466053 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594344e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314027 (min) 0.314157 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353048 (min) 0.465656 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588983e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31406 (min) 0.31415 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353955 (min) 0.46746 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:46 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:46 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:46 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:46 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:46 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:46 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:46 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:46 DEBUG   opendrift.models.basemodel:2057:               -2.881847886472222e-20 <- latitude  -> 8.992752007550808e-06
12:55:46 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7954016764959563e-05
12:55:46 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:46 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583644e-12 degrees.
12:55:46 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:46 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:46 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:46 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31414 (min) 0.314096 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353671 (min) 0.469785 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:46 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:46 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:46 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:46 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:46 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091712e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31402 (min) 0.314093 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352862 (min) 0.467688 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610478e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313952 (min) 0.314078 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352914 (min) 0.467271 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107802e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313824 (min) 0.314159 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350344 (min) 0.461483 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:46 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:46 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:46 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:46 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:46 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:46 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:46 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:46 DEBUG   opendrift.models.basemodel:2057:               -1.83104137249858e-20 <- latitude  -> 8.992754993930223e-06
12:55:46 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7967140881699064e-05
12:55:46 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:46 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44042331559431e-12 degrees.
12:55:46 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:46 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:46 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:46 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314104 (min) 0.313892 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350269 (min) 0.462724 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:46 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:46 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:46 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:46 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:46 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070208e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314095 (min) 0.313976 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345963 (min) 0.453254 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583608e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314127 (min) 0.313944 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346009 (min) 0.453137 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44911582158361e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313941 (min) 0.314114 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340687 (min) 0.440247 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:46 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:46 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:46 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:46 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:46 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:46 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:46 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:46 DEBUG   opendrift.models.basemodel:2057:               -5.5415722923947926e-21 <- latitude  -> 8.992692458229457e-06
12:55:46 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7973560410500394e-05
12:55:46 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:46 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572911e-12 degrees.
12:55:46 DEBUG   opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
12:55:46 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 98 elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 98 elements
12:55:46 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 98 elements
12:55:46 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31407 (min) 0.314011 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340642 (min) 0.440678 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:46 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:46 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:46 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:46 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:46 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47084708655678e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314086 (min) 0.314001 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334655 (min) 0.424145 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070176e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31404 (min) 0.313987 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334636 (min) 0.424089 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567497e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313891 (min) 0.314094 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328461 (min) 0.405364 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:46 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:46 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:46 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:46 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:46 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:46 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:46 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:46 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992568339095685e-06
12:55:46 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7979223999460248e-05
12:55:46 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:46 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.48171271904339e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.314118 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328442 (min) 0.404857 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:46 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:46 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:46 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:46 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:46 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535357e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314122 (min) 0.313925 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322717 (min) 0.384118 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540715e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314019 (min) 0.313906 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322697 (min) 0.38414 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038036e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314082 (min) 0.313707 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318057 (min) 0.361482 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:46 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:46 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:46 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:46 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:46 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:46 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:46 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:46 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:46 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992353311904274e-06
12:55:46 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.79811544946205e-05
12:55:46 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:46 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49257835153001e-12 degrees.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:46 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:46 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:46 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:46 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:46 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:46 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:46 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:46 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:46 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:46 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313843 (min) 0.313752 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318044 (min) 0.361696 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:46 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:46 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:46 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:46 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:46 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:47 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:47 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:47 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032693e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31412 (min) 0.313871 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315053 (min) 0.337912 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038054e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314094 (min) 0.31385 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315051 (min) 0.337859 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032693e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314137 (min) 0.313968 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314159 (min) 0.314628 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:47 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:47 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:47 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:47 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:47 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:47 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:47 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:47 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:47 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:47 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992478049631644e-06
12:55:47 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7981150188994714e-05
12:55:47 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:47 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032703e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314007 (min) 0.31386 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313776 (min) 0.314567 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:47 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:47 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:47 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:47 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:47 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:47 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:47 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043432e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314047 (min) 0.313576 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315102 (min) 0.339173 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540753e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314135 (min) 0.313556 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315032 (min) 0.339126 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540757e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313754 (min) 0.314133 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318197 (min) 0.363033 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:47 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:47 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:47 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:47 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:47 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:47 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:47 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:47 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:47 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:47 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.99269706956287e-06
12:55:47 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7979935665718104e-05
12:55:47 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:47 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048804e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314011 (min) 0.313903 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318128 (min) 0.3623 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:47 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:47 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:47 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:47 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:47 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:47 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:47 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064896e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314062 (min) 0.314053 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322862 (min) 0.385133 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562214e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314111 (min) 0.314022 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322838 (min) 0.384834 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064896e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314037 (min) 0.314019 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328646 (min) 0.405586 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:47 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:47 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:47 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:47 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:47 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:47 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:47 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:47 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:47 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:47 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992867779680328e-06
12:55:47 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798133122148488e-05
12:55:47 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:47 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567542e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313899 (min) 0.313993 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328592 (min) 0.405999 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:47 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:47 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:47 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:47 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:47 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:47 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:47 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064875e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313629 (min) 0.314093 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334778 (min) 0.424272 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070234e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313685 (min) 0.314053 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334697 (min) 0.424933 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070234e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314075 (min) 0.314075 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340693 (min) 0.440817 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:47 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:47 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:47 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:47 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:47 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:47 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:47 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:47 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:09
12:55:47 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:47 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:47 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:47 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:47 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:47 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:47 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:47 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:47 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:47 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:47 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:47 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:47 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:47 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:47 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:47 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:47 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:47 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:47 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:47 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:47 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:47 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:21 to 2000-01-01 00:00:09)
12:55:47 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:47 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:47 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:47 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:47 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:47 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:47 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:47 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:47 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:21 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:47 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:47 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:47 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:47 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:47 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:47 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314127 (min) 0.314087 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328262 (min) 0.402485 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:47 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:47 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:47 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:47 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:47 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:47 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:47 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314156 (min) 0.314003 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322554 (min) 0.38233 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118454e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314128 (min) 0.314073 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322557 (min) 0.381992 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615777e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314147 (min) 0.31401 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317928 (min) 0.359813 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:47 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:47 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:47 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:47 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:47 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:47 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:47 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:20.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:47 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:47 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:47 DEBUG   opendrift.models.basemodel:2057:               -5.873238894978038e-20 <- latitude  -> 8.888024620024215e-06
12:55:47 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7891613696020602e-05
12:55:47 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:47 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4972 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4339039361024e-12 degrees.
12:55:47 DEBUG   opendrift.readers.basereader.variables:829: Masking 28 elements outside coverage
12:55:47 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 28 elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 28 elements
12:55:47 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 28 elements
12:55:47 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314093 (min) 0.314113 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317941 (min) 0.360309 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:47 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:47 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:47 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:47 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:47 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:47 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:47 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605098e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314077 (min) 0.313995 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314919 (min) 0.336843 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615822e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314143 (min) 0.313968 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314988 (min) 0.336865 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177117853e-12 degrees.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314157 (min) 0.314102 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314017 (min) 0.315126 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:47 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:47 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:47 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:47 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:47 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:47 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:47 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:20 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:47 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:47 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:47 DEBUG   opendrift.models.basemodel:2057:               -5.294030430595241e-20 <- latitude  -> 8.930203327038414e-06
12:55:47 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7931897283672695e-05
12:55:47 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:47 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4972 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626565e-12 degrees.
12:55:47 DEBUG   opendrift.readers.basereader.variables:829: Masking 28 elements outside coverage
12:55:47 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 28 elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:47 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:47 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:47 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:47 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:47 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:47 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:47 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:47 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 28 elements
12:55:47 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 28 elements
12:55:47 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:47 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:47 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313927 (min) 0.314094 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314093 (min) 0.31516 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:47 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:47 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:47 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:47 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:47 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:47 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:48 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:48 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:48 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642673e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313775 (min) 0.313982 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315075 (min) 0.339255 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785648033e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313991 (min) 0.314019 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315019 (min) 0.339624 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785648037e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31391 (min) 0.314062 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318174 (min) 0.363539 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:48 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:48 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:48 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:48 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:48 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:48 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:48 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:48 DEBUG   opendrift.models.basemodel:2057:               -4.598624414480917e-20 <- latitude  -> 8.954823854378082e-06
12:55:48 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7952015735764383e-05
12:55:48 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:48 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4975 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172184e-12 degrees.
12:55:48 DEBUG   opendrift.readers.basereader.variables:829: Masking 25 elements outside coverage
12:55:48 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 25 elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 25 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 25 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314099 (min) 0.314148 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318255 (min) 0.363626 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:48 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:48 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:48 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:48 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:48 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701695e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314123 (min) 0.314153 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322881 (min) 0.386175 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129204379e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314156 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322965 (min) 0.386327 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701698e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314044 (min) 0.314008 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328772 (min) 0.407254 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:48 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:48 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:48 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:48 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:48 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:48 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:48 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:48 DEBUG   opendrift.models.basemodel:2057:               -3.713209265262447e-20 <- latitude  -> 8.969822601566282e-06
12:55:48 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7962656187728213e-05
12:55:48 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:48 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4980 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236572e-12 degrees.
12:55:48 DEBUG   opendrift.readers.basereader.variables:829: Masking 20 elements outside coverage
12:55:48 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 20 elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 20 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 20 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313823 (min) 0.31406 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328704 (min) 0.404755 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:48 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:48 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:48 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:48 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:48 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.292650713776814e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314007 (min) 0.313607 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.335001 (min) 0.422908 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.292650713776814e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31409 (min) 0.313776 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.335073 (min) 0.424563 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.290477587279493e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313714 (min) 0.31393 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341064 (min) 0.440447 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:48 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:48 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:48 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:48 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:48 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:48 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:48 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:48 DEBUG   opendrift.models.basemodel:2057:               -2.9832700834063483e-20 <- latitude  -> 8.97932619373149e-06
12:55:48 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7968630103582295e-05
12:55:48 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:48 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4987 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.26222694281437e-12 degrees.
12:55:48 DEBUG   opendrift.readers.basereader.variables:829: Masking 13 elements outside coverage
12:55:48 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 13 elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 13 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 13 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313434 (min) 0.313392 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34109 (min) 0.434732 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:48 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:48 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:48 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:48 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:48 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.227456918857289e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312658 (min) 0.3141 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346351 (min) 0.448911 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.225283792359971e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312574 (min) 0.314118 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346328 (min) 0.447567 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.22311066586265e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313017 (min) 0.3138 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350335 (min) 0.456774 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:48 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:48 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:48 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:48 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:48 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:48 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:48 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:48 DEBUG   opendrift.models.basemodel:2057:               -2.537353640544857e-20 <- latitude  -> 8.985000956421868e-06
12:55:48 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7972208810554652e-05
12:55:48 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:48 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4990 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.188340641905567e-12 degrees.
12:55:48 DEBUG   opendrift.readers.basereader.variables:829: Masking 10 elements outside coverage
12:55:48 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 10 elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 10 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 10 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314132 (min) 0.31341 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350365 (min) 0.455699 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:48 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:48 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:48 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:48 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:48 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.179648135916061e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313565 (min) 0.314151 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35285 (min) 0.467066 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.17312875642412e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313486 (min) 0.314157 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352953 (min) 0.466438 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.1731287564241e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313562 (min) 0.314137 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353673 (min) 0.468162 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:48 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:48 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:48 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:48 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:48 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:48 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:48 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:48 DEBUG   opendrift.models.basemodel:2057:               -1.857316135255164e-20 <- latitude  -> 8.988572316568138e-06
12:55:48 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7974502205238215e-05
12:55:48 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:48 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4992 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.177475009418738e-12 degrees.
12:55:48 DEBUG   opendrift.readers.basereader.variables:829: Masking 8 elements outside coverage
12:55:48 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 8 elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 8 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 8 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313936 (min) 0.314018 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35399 (min) 0.467602 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:48 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:48 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:48 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:48 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:48 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.183994388910692e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314095 (min) 0.313819 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352923 (min) 0.465676 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.177475009418735e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314074 (min) 0.313859 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35286 (min) 0.46538 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.17747500941871e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314099 (min) 0.313876 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350073 (min) 0.459601 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:48 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:48 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:48 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:48 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:48 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:48 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:48 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:48 DEBUG   opendrift.models.basemodel:2057:               -2.1105748339895052e-20 <- latitude  -> 8.990391502263051e-06
12:55:48 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976028564987617e-05
12:55:48 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:48 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4990 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.1883406419053e-12 degrees.
12:55:48 DEBUG   opendrift.readers.basereader.variables:829: Masking 10 elements outside coverage
12:55:48 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 10 elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 10 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 10 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313916 (min) 0.313989 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350269 (min) 0.459979 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:48 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:48 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:48 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:48 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:48 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.194860021397221e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313769 (min) 0.313699 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345953 (min) 0.451188 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.190513768402609e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31374 (min) 0.313699 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345951 (min) 0.450632 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.188340641905288e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314001 (min) 0.314003 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340592 (min) 0.437878 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:48 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:48 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:48 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:48 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:48 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:48 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:48 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:48 DEBUG   opendrift.models.basemodel:2057:               -2.5510047991864663e-20 <- latitude  -> 8.991026480738123e-06
12:55:48 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797694105640486e-05
12:55:48 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:48 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4970 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.203552527386516e-12 degrees.
12:55:48 DEBUG   opendrift.readers.basereader.variables:829: Masking 30 elements outside coverage
12:55:48 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 30 elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 30 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 30 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313931 (min) 0.313733 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340635 (min) 0.438528 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:48 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:48 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:48 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:48 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:48 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.214418159873117e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314021 (min) 0.314146 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334171 (min) 0.422485 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.210071906878455e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314042 (min) 0.314116 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334112 (min) 0.422199 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.207898780381165e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313452 (min) 0.314151 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328432 (min) 0.403709 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:48 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:48 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:48 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:48 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:48 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:48 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:48 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:48 DEBUG   opendrift.models.basemodel:2057:               -2.0196407021558976e-20 <- latitude  -> 8.990689198597015e-06
12:55:48 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977097634509968e-05
12:55:48 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:48 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4908 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.225283792359706e-12 degrees.
12:55:48 DEBUG   opendrift.readers.basereader.variables:829: Masking 92 elements outside coverage
12:55:48 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 92 elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 92 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 92 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313784 (min) 0.314087 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3284 (min) 0.404754 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:48 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:48 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:48 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:48 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:48 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.238322551343606e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314075 (min) 0.313963 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322694 (min) 0.384291 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.23180317185165e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31409 (min) 0.314096 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322719 (min) 0.384235 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.231803171851655e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313911 (min) 0.314119 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317966 (min) 0.361572 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:48 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:48 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:48 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:48 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:48 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:48 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:48 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:48 DEBUG   opendrift.models.basemodel:2057:               -2.263079419286847e-20 <- latitude  -> 8.989372413712253e-06
12:55:48 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797603157615436e-05
12:55:48 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:48 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4904 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24918818383022e-12 degrees.
12:55:48 DEBUG   opendrift.readers.basereader.variables:829: Masking 96 elements outside coverage
12:55:48 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 96 elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 96 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 96 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.3141 (min) 0.313926 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31798 (min) 0.36128 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:48 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:48 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:48 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:48 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:48 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.273092575300078e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314048 (min) 0.314099 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31502 (min) 0.337256 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.262226942813481e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314063 (min) 0.313994 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315026 (min) 0.337441 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.257880689819481e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313853 (min) 0.314078 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314135 (min) 0.314393 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:48 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:48 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:48 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:48 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:48 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:48 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:48 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:48 DEBUG   opendrift.models.basemodel:2057:               -2.6848558161660533e-20 <- latitude  -> 8.990716415749595e-06
12:55:48 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7972782714189788e-05
12:55:48 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:48 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284645e-12 degrees.
12:55:48 DEBUG   opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
12:55:48 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 98 elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 98 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 98 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314072 (min) 0.313854 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313861 (min) 0.314321 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:48 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:48 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:48 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:48 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:48 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252455e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314134 (min) 0.313934 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315198 (min) 0.338623 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.299170093268532e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314136 (min) 0.313825 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315235 (min) 0.338377 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.296996966771216e-12 degrees.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314078 (min) 0.313903 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318142 (min) 0.361839 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:48 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:48 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:48 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:48 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:48 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:48 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:48 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:48 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:48 DEBUG   opendrift.models.basemodel:2057:               -3.1646822695105144e-20 <- latitude  -> 8.99125178730672e-06
12:55:48 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7965438601926596e-05
12:55:48 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:48 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.333940117225653e-12 degrees.
12:55:48 DEBUG   opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
12:55:48 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 98 elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:48 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:48 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:48 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:48 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:48 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:48 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:48 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 98 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 98 elements
12:55:48 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:48 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:48 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314039 (min) 0.313902 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317795 (min) 0.362312 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:48 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:48 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:48 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:48 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:48 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:49 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:49 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:49 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129204201e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314049 (min) 0.313581 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322674 (min) 0.38418 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717601e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314037 (min) 0.313696 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322834 (min) 0.384537 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.338286370220281e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313986 (min) 0.314066 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328788 (min) 0.405132 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:49 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:49 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:49 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:49 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:49 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:49 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:49 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:49 DEBUG   opendrift.models.basemodel:2057:               -3.565856567720969e-20 <- latitude  -> 8.991277889448995e-06
12:55:49 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7950047296543634e-05
12:55:49 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:49 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.373056394177381e-12 degrees.
12:55:49 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:49 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:49 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:49 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314083 (min) 0.31394 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328649 (min) 0.40566 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:49 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:49 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:49 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:49 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:49 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642571e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314152 (min) 0.314152 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334963 (min) 0.42426 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664007e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314152 (min) 0.314132 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.335022 (min) 0.424309 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.386095153161332e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314106 (min) 0.313878 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340904 (min) 0.440016 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:49 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:49 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:49 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:49 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:49 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:49 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:49 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:49 DEBUG   opendrift.models.basemodel:2057:               -3.708899373152964e-20 <- latitude  -> 8.991700916393605e-06
12:55:49 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7924696748731765e-05
12:55:49 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:49 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637241e-12 degrees.
12:55:49 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:49 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:49 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:49 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314145 (min) 0.314023 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341057 (min) 0.43995 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:49 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:49 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:49 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:49 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:49 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610234e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313617 (min) 0.314142 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346339 (min) 0.452384 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118419e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313833 (min) 0.314115 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34627 (min) 0.452517 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610381e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31333 (min) 0.313635 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350431 (min) 0.461702 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:49 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:49 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:49 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:49 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:49 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:49 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:49 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:49 DEBUG   opendrift.models.basemodel:2057:               -3.49562266774897e-20 <- latitude  -> 8.99164889692523e-06
12:55:49 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7944769240011963e-05
12:55:49 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:49 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583602e-12 degrees.
12:55:49 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:49 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:49 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:49 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313572 (min) 0.314156 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350534 (min) 0.461928 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:49 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:49 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:49 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:49 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:49 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567537e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314148 (min) 0.31366 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352906 (min) 0.468386 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583618e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314155 (min) 0.313647 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352809 (min) 0.468568 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583621e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314133 (min) 0.31367 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353643 (min) 0.470384 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:49 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:49 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:49 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:49 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:49 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:49 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:49 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:49 DEBUG   opendrift.models.basemodel:2057:               -2.8477179585004947e-20 <- latitude  -> 8.990901519545344e-06
12:55:49 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7960344016104473e-05
12:55:49 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:49 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578281e-12 degrees.
12:55:49 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:49 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:49 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:49 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314149 (min) 0.314085 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353972 (min) 0.4702 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:49 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:49 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:49 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:49 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:49 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086345e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314143 (min) 0.314085 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353037 (min) 0.466401 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097071e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31413 (min) 0.314068 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35297 (min) 0.465825 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599753e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314092 (min) 0.314143 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350286 (min) 0.460077 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:49 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:49 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:49 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:49 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:49 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:49 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:49 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:49 DEBUG   opendrift.models.basemodel:2057:               -1.806121594671543e-20 <- latitude  -> 8.990123963187756e-06
12:55:49 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797059891498368e-05
12:55:49 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:49 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45128894808093e-12 degrees.
12:55:49 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:49 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:49 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:49 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314104 (min) 0.314059 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.349821 (min) 0.461774 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:49 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:49 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:49 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:49 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:49 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578269e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313559 (min) 0.313947 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346141 (min) 0.453365 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086311e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313665 (min) 0.314061 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346139 (min) 0.45327 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583636e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314055 (min) 0.314078 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340657 (min) 0.440369 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:49 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:49 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:49 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:49 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:49 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:49 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:49 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:49 DEBUG   opendrift.models.basemodel:2057:               -5.339462603531002e-21 <- latitude  -> 8.990381513142987e-06
12:55:49 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7975549871335734e-05
12:55:49 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:49 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44694269508633e-12 degrees.
12:55:49 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:49 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:49 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:49 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314057 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34055 (min) 0.440285 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:49 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:49 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:49 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:49 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:49 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080921e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314148 (min) 0.31415 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334618 (min) 0.424646 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314125 (min) 0.314145 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334658 (min) 0.424626 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594325e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314008 (min) 0.31415 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328001 (min) 0.40587 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:49 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:49 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:49 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:49 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:49 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:49 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:49 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:49 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.989819537919495e-06
12:55:49 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798044179322457e-05
12:55:49 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:49 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567489e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314006 (min) 0.313723 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32847 (min) 0.404709 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:49 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:49 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:49 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:49 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:49 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.48171271904338e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313419 (min) 0.314037 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322642 (min) 0.384205 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054097e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313259 (min) 0.313993 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322629 (min) 0.384172 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551417e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313921 (min) 0.313834 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318072 (min) 0.361585 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:49 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:49 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:49 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:49 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:49 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:49 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:49 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:49 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.98855812603679e-06
12:55:49 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798219238107833e-05
12:55:49 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:49 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535346e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31414 (min) 0.314041 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318006 (min) 0.36096 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:49 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:49 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:49 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:49 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:49 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49692460452463e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313591 (min) 0.314063 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315045 (min) 0.338139 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529992e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313627 (min) 0.314046 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315103 (min) 0.338083 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032667e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314094 (min) 0.313796 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314116 (min) 0.314568 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:49 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:49 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:49 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:49 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:49 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:49 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:49 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:49 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.988509935850366e-06
12:55:49 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7982353949090284e-05
12:55:49 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:49 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.499097731021952e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314083 (min) 0.314036 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313923 (min) 0.314049 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:49 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:49 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:49 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:49 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:49 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.503443984016598e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314065 (min) 0.313843 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315245 (min) 0.338931 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519277e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314023 (min) 0.313864 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31525 (min) 0.339061 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.503443984016598e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314091 (min) 0.314131 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318112 (min) 0.36288 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:49 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:49 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:49 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:49 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:49 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:49 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:49 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:49 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.987061642907539e-06
12:55:49 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7981553284005924e-05
12:55:49 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:49 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.50127085751928e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314029 (min) 0.313959 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318244 (min) 0.362235 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:49 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:49 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:49 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:49 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:49 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:49 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.503443984016605e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314103 (min) 0.313974 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322933 (min) 0.384525 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.503443984016605e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314048 (min) 0.313997 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322876 (min) 0.38414 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.501270857519283e-12 degrees.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313771 (min) 0.314007 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328696 (min) 0.404703 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:49 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:49 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:49 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:49 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:49 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:49 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:49 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:49 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:49 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:49 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:49 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:49 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:49 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:49 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:49 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:49 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:49 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:49 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:50 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:50 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:09.500000
12:55:50 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:50 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:50 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:50 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:50 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:50 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:50 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:50 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:50 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:50 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:50 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:50 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:50 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:50 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:50 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:50 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:50 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:50 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:50 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:50 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:50 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:50 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:21.500000 to 2000-01-01 00:00:09.500000)
12:55:50 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:50 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:50 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:50 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:50 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:50 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:50 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:50 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:50 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:21.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:50 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:50 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:50 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:50 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:50 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:50 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314136 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340608 (min) 0.436385 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:50 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:50 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:50 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:50 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:50 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:50 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:50 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.314058 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334572 (min) 0.421257 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118456e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314142 (min) 0.31399 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334555 (min) 0.420664 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118457e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314098 (min) 0.314042 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328243 (min) 0.402391 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:50 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:50 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:50 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:50 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:50 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:50 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:50 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:21 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:50 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:50 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:50 DEBUG   opendrift.models.basemodel:2057:               -6.391760066194745e-20 <- latitude  -> 8.890252051630076e-06
12:55:50 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7898311175835208e-05
12:55:50 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:50 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4969 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599723e-12 degrees.
12:55:50 DEBUG   opendrift.readers.basereader.variables:829: Masking 31 elements outside coverage
12:55:50 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 31 elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 31 elements
12:55:50 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 31 elements
12:55:50 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314142 (min) 0.314107 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328306 (min) 0.403357 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:50 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:50 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:50 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:50 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:50 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:50 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:50 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610465e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314066 (min) 0.313782 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322681 (min) 0.382965 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41651892412387e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314131 (min) 0.313886 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322671 (min) 0.382842 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123873e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314151 (min) 0.314054 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31797 (min) 0.360437 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:50 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:50 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:50 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:50 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:50 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:50 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:50 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:20.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:50 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:50 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:50 DEBUG   opendrift.models.basemodel:2057:               -5.891748954813312e-20 <- latitude  -> 8.932497874110388e-06
12:55:50 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7939725938235857e-05
12:55:50 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:50 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4968 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134617e-12 degrees.
12:55:50 DEBUG   opendrift.readers.basereader.variables:829: Masking 32 elements outside coverage
12:55:50 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 32 elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 32 elements
12:55:50 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 32 elements
12:55:50 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314107 (min) 0.313855 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317725 (min) 0.360992 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:50 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:50 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:50 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:50 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:50 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:50 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:50 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.388268279658125e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314129 (min) 0.314079 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31513 (min) 0.337379 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172177e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314067 (min) 0.314111 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315112 (min) 0.337396 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773669502e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314137 (min) 0.31414 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314087 (min) 0.315157 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:50 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:50 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:50 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:50 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:50 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:50 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:50 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:20 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:50 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:50 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:50 DEBUG   opendrift.models.basemodel:2057:               -5.3068216162787503e-20 <- latitude  -> 8.956178007956957e-06
12:55:50 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.795914914129214e-05
12:55:50 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:50 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4971 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382199016e-12 degrees.
12:55:50 DEBUG   opendrift.readers.basereader.variables:829: Masking 29 elements outside coverage
12:55:50 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 29 elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 29 elements
12:55:50 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 29 elements
12:55:50 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314158 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31414 (min) 0.31502 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:50 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:50 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:50 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:50 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:50 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:50 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:50 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.316555105247303e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31399 (min) 0.31407 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315265 (min) 0.339524 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252672e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31386 (min) 0.314094 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315246 (min) 0.339144 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.31003572575535e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313832 (min) 0.313932 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318256 (min) 0.36303 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:50 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:50 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:50 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:50 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:50 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:50 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:50 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:50 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:50 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:50 DEBUG   opendrift.models.basemodel:2057:               -4.4935672843328164e-20 <- latitude  -> 8.970317059602655e-06
12:55:50 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7968643393834586e-05
12:55:50 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:50 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4977 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.27309257530096e-12 degrees.
12:55:50 DEBUG   opendrift.readers.basereader.variables:829: Masking 23 elements outside coverage
12:55:50 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 23 elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 23 elements
12:55:50 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 23 elements
12:55:50 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.313555 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318159 (min) 0.363564 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:50 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:50 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:50 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:50 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:50 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:50 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:50 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.22311066586265e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.3128 (min) 0.313869 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323002 (min) 0.384015 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.220937539365333e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312568 (min) 0.31386 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323085 (min) 0.384642 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.218764412868015e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314012 (min) 0.313839 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328863 (min) 0.405526 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:50 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:50 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:50 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:50 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:50 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:50 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:50 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:50 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:50 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:50 DEBUG   opendrift.models.basemodel:2057:               -3.6366813433407405e-20 <- latitude  -> 8.979025018503267e-06
12:55:50 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7973433891077058e-05
12:55:50 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:50 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4984 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.207898780381212e-12 degrees.
12:55:50 DEBUG   opendrift.readers.basereader.variables:829: Masking 16 elements outside coverage
12:55:50 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 16 elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 16 elements
12:55:50 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 16 elements
12:55:50 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312228 (min) 0.312647 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328728 (min) 0.405237 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:50 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:50 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:50 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:50 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:50 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:50 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:50 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.212245033375814e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313832 (min) 0.313941 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33488 (min) 0.4161 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.199206274391935e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313639 (min) 0.31393 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33498 (min) 0.419783 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.201379400889235e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31314 (min) 0.314067 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34108 (min) 0.435662 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:50 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:50 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:50 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:50 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:50 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:50 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:50 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:50 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:50 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:50 DEBUG   opendrift.models.basemodel:2057:               -2.893442007472878e-20 <- latitude  -> 8.984646311391815e-06
12:55:50 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7975875612443022e-05
12:55:50 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:50 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4989 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.212245033375825e-12 degrees.
12:55:50 DEBUG   opendrift.readers.basereader.variables:829: Masking 11 elements outside coverage
12:55:50 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 11 elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 11 elements
12:55:50 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 11 elements
12:55:50 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313748 (min) 0.313146 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34093 (min) 0.436768 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:50 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:50 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:50 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:50 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:50 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:50 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:50 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.218764412867774e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314056 (min) 0.314057 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346299 (min) 0.442777 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.212245033375812e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313987 (min) 0.313989 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346335 (min) 0.44604 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.214418159873132e-12 degrees.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313911 (min) 0.314068 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350558 (min) 0.455486 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:50 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:50 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:50 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:50 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:50 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:50 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:50 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:50 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:50 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:50 DEBUG   opendrift.models.basemodel:2057:               -2.2880735948070922e-20 <- latitude  -> 8.987425340195723e-06
12:55:50 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977074181874267e-05
12:55:50 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:50 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4993 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.223110665862394e-12 degrees.
12:55:50 DEBUG   opendrift.readers.basereader.variables:829: Masking 7 elements outside coverage
12:55:50 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 7 elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:50 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:50 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:50 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:50 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:50 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:50 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:50 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:50 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 7 elements
12:55:50 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 7 elements
12:55:50 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:50 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:50 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313804 (min) 0.313956 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350325 (min) 0.460701 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:50 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:50 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:50 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:50 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:50 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:50 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:51 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:51 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:51 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.229630045353722e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314066 (min) 0.313752 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352714 (min) 0.465309 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.227456918857039e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314072 (min) 0.313739 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352703 (min) 0.464433 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.227456918857039e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314071 (min) 0.313702 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353429 (min) 0.466112 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:51 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:51 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:51 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:51 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:51 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:51 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:51 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:51 DEBUG   opendrift.models.basemodel:2057:               -2.018173893400642e-20 <- latitude  -> 8.988955710432e-06
12:55:51 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977539702837255e-05
12:55:51 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:51 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4994 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.233976298348996e-12 degrees.
12:55:51 DEBUG   opendrift.readers.basereader.variables:829: Masking 6 elements outside coverage
12:55:51 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 6 elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 6 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 6 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314089 (min) 0.313906 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353205 (min) 0.467215 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:51 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:51 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:51 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:51 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:51 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24266880433825e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314069 (min) 0.314092 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352335 (min) 0.466125 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24266880433825e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314042 (min) 0.314153 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352451 (min) 0.465498 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.240495677840929e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314137 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350146 (min) 0.45972 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:51 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:51 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:51 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:51 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:51 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:51 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:51 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:51 DEBUG   opendrift.models.basemodel:2057:               -1.38861211531948e-20 <- latitude  -> 8.989013048508874e-06
12:55:51 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977441336817915e-05
12:55:51 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:51 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4992 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.249188183830232e-12 degrees.
12:55:51 DEBUG   opendrift.readers.basereader.variables:829: Masking 8 elements outside coverage
12:55:51 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 8 elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 8 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 8 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313936 (min) 0.314143 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350248 (min) 0.460812 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:51 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:51 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:51 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:51 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:51 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.257880689819478e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.3139 (min) 0.314081 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34604 (min) 0.451346 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.255707563322192e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313948 (min) 0.314084 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345998 (min) 0.450836 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.253534436824236e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313681 (min) 0.314047 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340529 (min) 0.43806 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:51 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:51 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:51 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:51 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:51 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:51 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:51 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:51 DEBUG   opendrift.models.basemodel:2057:               -1.8524402912348558e-20 <- latitude  -> 8.987863942410405e-06
12:55:51 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797668469696881e-05
12:55:51 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:51 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4978 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.264400069311437e-12 degrees.
12:55:51 DEBUG   opendrift.readers.basereader.variables:829: Masking 22 elements outside coverage
12:55:51 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 22 elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 22 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 22 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313868 (min) 0.314056 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340694 (min) 0.439249 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:51 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:51 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:51 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:51 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:51 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798034e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314102 (min) 0.314039 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334147 (min) 0.42129 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.268746322306073e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314092 (min) 0.31403 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334133 (min) 0.421724 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.268746322306078e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313873 (min) 0.314029 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328428 (min) 0.403207 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:51 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:51 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:51 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:51 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:51 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:51 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:51 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:51 DEBUG   opendrift.models.basemodel:2057:               -1.851946967195438e-20 <- latitude  -> 8.98814584663386e-06
12:55:51 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797488155949305e-05
12:55:51 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:51 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4905 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787343e-12 degrees.
12:55:51 DEBUG   opendrift.readers.basereader.variables:829: Masking 95 elements outside coverage
12:55:51 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 95 elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 95 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 95 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313984 (min) 0.313929 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328338 (min) 0.404069 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:51 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:51 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:51 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:51 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:51 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29699696677126e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313844 (min) 0.314004 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322586 (min) 0.382447 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.290477587279271e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313821 (min) 0.313938 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322525 (min) 0.382711 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.290477587279273e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314083 (min) 0.314012 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317892 (min) 0.360164 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:51 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:51 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:51 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:51 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:51 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:51 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:51 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:51 DEBUG   opendrift.models.basemodel:2057:               -2.1441828182822124e-20 <- latitude  -> 8.989839631466616e-06
12:55:51 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7971195817021263e-05
12:55:51 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:51 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.303516346263183e-12 degrees.
12:55:51 DEBUG   opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
12:55:51 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 98 elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 98 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 98 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314091 (min) 0.313792 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318066 (min) 0.361054 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:51 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:51 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:51 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:51 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:51 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.318728231744419e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314149 (min) 0.314154 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314949 (min) 0.337639 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252462e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314148 (min) 0.31412 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315002 (min) 0.337555 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755144e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313998 (min) 0.313902 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314159 (min) 0.314554 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:51 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:51 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:51 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:51 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:51 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:51 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:51 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:51 DEBUG   opendrift.models.basemodel:2057:               -2.623749729515729e-20 <- latitude  -> 8.991216029388203e-06
12:55:51 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7963956199804622e-05
12:55:51 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:51 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.333940117225655e-12 degrees.
12:55:51 DEBUG   opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
12:55:51 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 98 elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 98 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 98 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314029 (min) 0.314138 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314105 (min) 0.314678 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:51 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:51 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:51 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:51 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:51 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.349152002706883e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313835 (min) 0.313938 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315101 (min) 0.338978 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.336113243723009e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313893 (min) 0.314008 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315014 (min) 0.338947 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.336113243722367e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313945 (min) 0.313938 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318269 (min) 0.362563 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:51 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:51 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:51 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:51 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:51 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:51 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:51 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:51 DEBUG   opendrift.models.basemodel:2057:               -3.1188297496916876e-20 <- latitude  -> 8.991992358653412e-06
12:55:51 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7949758086861647e-05
12:55:51 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:51 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690841e-12 degrees.
12:55:51 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:51 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314129 (min) 0.313954 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318151 (min) 0.36256 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:51 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:51 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:51 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:51 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:51 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166699e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314084 (min) 0.314097 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322917 (min) 0.384647 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680104e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314092 (min) 0.314115 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322779 (min) 0.384578 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.368710141182787e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313958 (min) 0.313778 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328689 (min) 0.405126 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:51 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:51 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:51 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:51 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:51 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:51 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:51 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:51 DEBUG   opendrift.models.basemodel:2057:               -3.522046654559857e-20 <- latitude  -> 8.992359336078306e-06
12:55:51 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.792617338076485e-05
12:55:51 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:51 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145235e-12 degrees.
12:55:51 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:51 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313857 (min) 0.314064 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328706 (min) 0.40603 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:51 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:51 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:51 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:51 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:51 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123823e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314101 (min) 0.314061 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334947 (min) 0.422789 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139256e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314111 (min) 0.314022 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334931 (min) 0.42392 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139903e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313717 (min) 0.313744 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340918 (min) 0.4397 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:51 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:51 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:51 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:51 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:51 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:51 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:51 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:51 DEBUG   opendrift.models.basemodel:2057:               -3.6902442430802784e-20 <- latitude  -> 8.992447733935459e-06
12:55:51 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.794196461102278e-05
12:55:51 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:51 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118407e-12 degrees.
12:55:51 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:51 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314091 (min) 0.314143 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341005 (min) 0.440803 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:51 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:51 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:51 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:51 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:51 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44476956858894e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314077 (min) 0.313776 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346233 (min) 0.452488 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610234e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314067 (min) 0.313742 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346132 (min) 0.451584 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102342e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314105 (min) 0.313703 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350263 (min) 0.460841 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:51 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:51 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:51 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:51 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:51 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:51 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:51 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:51 DEBUG   opendrift.models.basemodel:2057:               -3.470043709012845e-20 <- latitude  -> 8.992352825599814e-06
12:55:51 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7955487545839702e-05
12:55:51 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:51 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070197e-12 degrees.
12:55:51 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:51 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314074 (min) 0.314154 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350245 (min) 0.462216 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:51 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:51 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:51 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:51 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:51 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:51 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059495e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313975 (min) 0.314111 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353072 (min) 0.465675 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070216e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313938 (min) 0.314042 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352974 (min) 0.467082 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567539e-12 degrees.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313947 (min) 0.314005 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353918 (min) 0.468938 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:51 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:51 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:51 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:51 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:51 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:51 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:51 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:51 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:51 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:51 DEBUG   opendrift.models.basemodel:2057:               -2.828537023395369e-20 <- latitude  -> 8.992133734028174e-06
12:55:51 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7966030386767982e-05
12:55:51 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:51 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567554e-12 degrees.
12:55:51 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:51 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:51 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:51 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:51 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:51 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:51 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:51 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:51 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:51 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:51 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:51 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314 (min) 0.314015 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353972 (min) 0.469773 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:51 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:52 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:52 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:52 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:52 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:52 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:52 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:52 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45780832757294e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314096 (min) 0.314084 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352899 (min) 0.466462 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44694269508634e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31412 (min) 0.31409 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352988 (min) 0.46769 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086345e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314104 (min) 0.314083 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350334 (min) 0.461903 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:52 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:52 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:52 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:52 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:52 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:52 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:52 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:52 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:52 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:52 DEBUG   opendrift.models.basemodel:2057:               -1.7926585564723835e-20 <- latitude  -> 8.992070599195621e-06
12:55:52 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7973682145784024e-05
12:55:52 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:52 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567531e-12 degrees.
12:55:52 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:52 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:52 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:52 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314124 (min) 0.314 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350347 (min) 0.462304 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:52 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:52 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:52 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:52 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:52 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:52 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:52 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059516e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313935 (min) 0.314157 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345986 (min) 0.451858 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578269e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314071 (min) 0.314159 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345867 (min) 0.452511 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075595e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314101 (min) 0.314105 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340524 (min) 0.439641 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:52 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:52 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:52 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:52 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:52 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:52 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:52 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:52 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:52 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:52 DEBUG   opendrift.models.basemodel:2057:               -5.252313688936848e-21 <- latitude  -> 8.992517719865989e-06
12:55:52 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977073440082175e-05
12:55:52 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:52 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46650083356218e-12 degrees.
12:55:52 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:52 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:52 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:52 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31394 (min) 0.313997 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340697 (min) 0.440326 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:52 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:52 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:52 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:52 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:52 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:52 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:52 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562198e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313992 (min) 0.31351 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334701 (min) 0.424453 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45998145407024e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313933 (min) 0.313591 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334697 (min) 0.424374 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4556352010756e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314146 (min) 0.314127 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328307 (min) 0.405651 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:52 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:52 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:52 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:52 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:52 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:52 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:52 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:52 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:52 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:52 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992775299928158e-06
12:55:52 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798142089797742e-05
12:55:52 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:52 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059466e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313988 (min) 0.314055 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328245 (min) 0.405108 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:52 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:52 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:52 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:52 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:52 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:52 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:52 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551436e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31413 (min) 0.313976 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322599 (min) 0.384822 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47302021305412e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314113 (min) 0.313981 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322535 (min) 0.384851 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47302021305412e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314012 (min) 0.314153 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318029 (min) 0.362082 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:52 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:52 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:52 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:52 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:52 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:52 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:52 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:52 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:52 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:52 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.992931990798592e-06
12:55:52 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798308561423629e-05
12:55:52 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:52 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546088e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314074 (min) 0.314018 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318068 (min) 0.362031 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:52 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:52 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:52 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:52 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:52 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:52 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:52 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546098e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314141 (min) 0.314069 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314972 (min) 0.337487 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4795395925461e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314068 (min) 0.314084 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314979 (min) 0.337348 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4795395925461e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314062 (min) 0.314148 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314021 (min) 0.3145 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:52 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:52 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:52 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:52 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:52 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:52 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:52 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:52 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:52 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:52 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.993032009704444e-06
12:55:52 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7983444714551148e-05
12:55:52 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:52 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546111e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314055 (min) 0.314058 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313791 (min) 0.313975 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:52 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:52 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:52 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:52 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:52 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:52 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:52 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054162e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314056 (min) 0.313962 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31506 (min) 0.338907 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059522e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31403 (min) 0.313938 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31516 (min) 0.338857 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556193e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313707 (min) 0.313993 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318167 (min) 0.362575 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:52 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:52 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:52 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:52 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:52 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:52 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:52 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:52 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:10
12:55:52 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:52 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:52 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:52 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:52 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:52 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:52 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:52 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:52 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:52 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:52 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:52 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:52 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:52 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:52 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:52 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:52 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:52 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:52 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:52 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:52 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:52 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:22 to 2000-01-01 00:00:10)
12:55:52 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:52 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:52 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:52 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:52 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:52 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:52 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:52 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:52 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:22 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:52 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:52 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:52 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:52 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:52 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:52 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:52 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:52 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:52 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:52 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:52 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:52 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:52 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:52 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:52 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:52 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314156 (min) 0.314159 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350291 (min) 0.458265 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:52 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:52 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:52 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:52 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:52 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:52 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:53 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:53 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:53 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31411 (min) 0.313951 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345933 (min) 0.449484 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123817e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314142 (min) 0.313969 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345921 (min) 0.44896 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42303830361578e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314152 (min) 0.314154 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340534 (min) 0.436321 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:53 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:53 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:53 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:53 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:53 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:53 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:21.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:53 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:53 DEBUG   opendrift.models.basemodel:2057:               -6.788773210860659e-20 <- latitude  -> 8.892433883295251e-06
12:55:53 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7903038880988653e-05
12:55:53 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:53 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4967 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605086e-12 degrees.
12:55:53 DEBUG   opendrift.readers.basereader.variables:829: Masking 33 elements outside coverage
12:55:53 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 33 elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 33 elements
12:55:53 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 33 elements
12:55:53 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314039 (min) 0.313869 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340539 (min) 0.437421 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:53 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:53 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:53 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:53 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:53 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:53 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:53 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615834e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314133 (min) 0.314157 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334269 (min) 0.422718 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626555e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314156 (min) 0.314154 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334329 (min) 0.42241 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626563e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314145 (min) 0.313836 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32821 (min) 0.403887 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:53 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:53 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:53 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:53 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:53 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:53 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:21 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:53 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:53 DEBUG   opendrift.models.basemodel:2057:               -6.314386719283566e-20 <- latitude  -> 8.935102932852547e-06
12:55:53 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7945282768565648e-05
12:55:53 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:53 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4964 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39913391214535e-12 degrees.
12:55:53 DEBUG   opendrift.readers.basereader.variables:829: Masking 36 elements outside coverage
12:55:53 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 36 elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 36 elements
12:55:53 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 36 elements
12:55:53 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314156 (min) 0.314143 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328328 (min) 0.404565 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:53 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:53 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:53 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:53 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:53 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:53 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:53 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37305639417755e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313884 (min) 0.313761 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32265 (min) 0.383983 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36653701468561e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313864 (min) 0.313771 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322665 (min) 0.383909 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.360017635192998e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314054 (min) 0.314096 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31805 (min) 0.361267 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:53 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:53 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:53 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:53 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:53 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:53 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:20.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:53 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:53 DEBUG   opendrift.models.basemodel:2057:               -5.848318256472788e-20 <- latitude  -> 8.958530445642256e-06
12:55:53 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7964087758676126e-05
12:55:53 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:53 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4967 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.329593864230568e-12 degrees.
12:55:53 DEBUG   opendrift.readers.basereader.variables:829: Masking 33 elements outside coverage
12:55:53 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 33 elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 33 elements
12:55:53 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 33 elements
12:55:53 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313724 (min) 0.313942 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318072 (min) 0.359758 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:53 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:53 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:53 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:53 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:53 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:53 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:53 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.277438828294954e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314149 (min) 0.313747 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315107 (min) 0.335938 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.268746322306322e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314103 (min) 0.313725 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31508 (min) 0.335886 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.264400069311683e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314018 (min) 0.314004 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313965 (min) 0.314989 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:53 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:53 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:53 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:53 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:53 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:53 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:20 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:53 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:53 DEBUG   opendrift.models.basemodel:2057:               -5.261408386619772e-20 <- latitude  -> 8.971783877002643e-06
12:55:53 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7972594247479376e-05
12:55:53 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:53 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4974 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.22745691885711e-12 degrees.
12:55:53 DEBUG   opendrift.readers.basereader.variables:829: Masking 26 elements outside coverage
12:55:53 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 26 elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 26 elements
12:55:53 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 26 elements
12:55:53 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314038 (min) 0.313961 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314021 (min) 0.314447 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:53 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:53 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:53 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:53 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:53 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:53 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:53 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.231803171851725e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313945 (min) 0.313361 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315097 (min) 0.339702 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.216591286370466e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31409 (min) 0.313344 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315124 (min) 0.339533 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.21659128637049e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313614 (min) 0.314136 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318177 (min) 0.363441 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:53 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:53 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:53 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:53 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:53 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:53 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:53 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:53 DEBUG   opendrift.models.basemodel:2057:               -4.416845332117533e-20 <- latitude  -> 8.979538257881134e-06
12:55:53 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976360277621744e-05
12:55:53 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:53 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4982 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.229630045354387e-12 degrees.
12:55:53 DEBUG   opendrift.readers.basereader.variables:829: Masking 18 elements outside coverage
12:55:53 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 18 elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 18 elements
12:55:53 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 18 elements
12:55:53 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313563 (min) 0.31385 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318402 (min) 0.361542 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:53 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:53 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:53 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:53 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:53 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:53 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:53 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.244841930835596e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313347 (min) 0.314102 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323081 (min) 0.382063 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.233976298348996e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313067 (min) 0.314093 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322975 (min) 0.3839 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.233976298348994e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312769 (min) 0.313441 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328875 (min) 0.404765 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:53 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:53 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:53 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:53 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:53 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:53 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:53 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:53 DEBUG   opendrift.models.basemodel:2057:               -3.538509281254543e-20 <- latitude  -> 8.984772393990282e-06
12:55:53 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797779392273688e-05
12:55:53 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:53 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4988 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24918818383022e-12 degrees.
12:55:53 DEBUG   opendrift.readers.basereader.variables:829: Masking 12 elements outside coverage
12:55:53 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 12 elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 12 elements
12:55:53 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 12 elements
12:55:53 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.313471 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328656 (min) 0.400411 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:53 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:53 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:53 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:53 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:53 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:53 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:53 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.260053816316854e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313442 (min) 0.313224 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33504 (min) 0.424741 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.251361310327514e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313462 (min) 0.313156 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.335013 (min) 0.423911 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24918818383025e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313651 (min) 0.313242 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340766 (min) 0.439753 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:53 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:53 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:53 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:53 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:53 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:53 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:53 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:53 DEBUG   opendrift.models.basemodel:2057:               -2.6016251788274534e-20 <- latitude  -> 8.987290464935425e-06
12:55:53 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977991395904387e-05
12:55:53 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:53 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4993 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.264400069311434e-12 degrees.
12:55:53 DEBUG   opendrift.readers.basereader.variables:829: Masking 7 elements outside coverage
12:55:53 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 7 elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 7 elements
12:55:53 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 7 elements
12:55:53 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314105 (min) 0.31401 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340573 (min) 0.427393 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:53 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:53 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:53 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:53 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:53 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:53 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:53 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798029e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314105 (min) 0.313977 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346246 (min) 0.454056 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.266573195808112e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314116 (min) 0.313989 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346045 (min) 0.453423 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.270919448803419e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314127 (min) 0.313827 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35036 (min) 0.462712 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:53 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:53 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:53 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:53 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:53 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:53 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:53 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:53 DEBUG   opendrift.models.basemodel:2057:               -2.3138583734570898e-20 <- latitude  -> 8.989649209834324e-06
12:55:53 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977462104397615e-05
12:55:53 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:53 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.279611954792688e-12 degrees.
12:55:53 DEBUG   opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
12:55:53 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 5 elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 5 elements
12:55:53 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 5 elements
12:55:53 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313982 (min) 0.314126 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350465 (min) 0.458583 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:53 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:53 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:53 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:53 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:53 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:53 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:53 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284671e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313535 (min) 0.314065 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353038 (min) 0.464899 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.28395820778732e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313489 (min) 0.314052 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352836 (min) 0.464109 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.28395820778732e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313625 (min) 0.314059 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353753 (min) 0.465774 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:53 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:53 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:53 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:53 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:53 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:53 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:53 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:53 DEBUG   opendrift.models.basemodel:2057:               -1.933866593576289e-20 <- latitude  -> 8.990796898707376e-06
12:55:53 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976385453370528e-05
12:55:53 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:53 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29482384027327e-12 degrees.
12:55:53 DEBUG   opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
12:55:53 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 5 elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 5 elements
12:55:53 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 5 elements
12:55:53 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313818 (min) 0.313972 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353309 (min) 0.467288 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:53 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:53 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:53 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:53 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:53 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:53 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:53 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.299170093268566e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313828 (min) 0.314033 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352109 (min) 0.466283 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29917009326857e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313729 (min) 0.314009 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.351828 (min) 0.465486 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29917009326857e-12 degrees.
12:55:53 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:53 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:53 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313747 (min) 0.313963 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.349846 (min) 0.459713 (max)
12:55:53 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:53 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:53 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:53 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:53 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:53 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:53 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:53 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:53 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:53 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:53 DEBUG   opendrift.models.basemodel:2057:               -1.860271687525955e-20 <- latitude  -> 8.990962564299331e-06
12:55:53 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7974679514427055e-05
12:55:53 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:53 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:53 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:53 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:53 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:53 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4994 elements
12:55:53 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:53 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472760553e-12 degrees.
12:55:54 DEBUG   opendrift.readers.basereader.variables:829: Masking 6 elements outside coverage
12:55:54 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 6 elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 6 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 6 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313569 (min) 0.314034 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350206 (min) 0.460061 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:54 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:54 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:54 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:54 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:54 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755174e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314066 (min) 0.314158 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345851 (min) 0.451594 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755176e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314048 (min) 0.314121 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345966 (min) 0.451189 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.31003572575514e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314117 (min) 0.313969 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34069 (min) 0.43842 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:54 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:54 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:54 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:54 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:54 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:54 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:54 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:54 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:54 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:54 DEBUG   opendrift.models.basemodel:2057:               -1.5579179573941163e-20 <- latitude  -> 8.990076334684774e-06
12:55:54 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7971974362974013e-05
12:55:54 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:54 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4983 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.318728231744442e-12 degrees.
12:55:54 DEBUG   opendrift.readers.basereader.variables:829: Masking 17 elements outside coverage
12:55:54 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 17 elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 17 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 17 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31406 (min) 0.314045 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340695 (min) 0.439319 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:54 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:54 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:54 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:54 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:54 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236422e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31404 (min) 0.314062 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334386 (min) 0.423937 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.320901358241784e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314041 (min) 0.314143 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334309 (min) 0.423876 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.323074484739066e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313597 (min) 0.313887 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328371 (min) 0.405184 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:54 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:54 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:54 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:54 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:54 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:54 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:54 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:54 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:54 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:54 DEBUG   opendrift.models.basemodel:2057:               -1.6585017643386474e-20 <- latitude  -> 8.990773804566271e-06
12:55:54 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7967476463574577e-05
12:55:54 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:54 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4903 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.333940117225687e-12 degrees.
12:55:54 DEBUG   opendrift.readers.basereader.variables:829: Masking 97 elements outside coverage
12:55:54 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 97 elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 97 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 97 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314089 (min) 0.314139 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328161 (min) 0.40496 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:54 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:54 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:54 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:54 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:54 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.342632623214953e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314122 (min) 0.314015 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322558 (min) 0.383967 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717635e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314115 (min) 0.31403 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32263 (min) 0.383859 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717637e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314077 (min) 0.313978 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318063 (min) 0.361307 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:54 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:54 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:54 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:54 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:54 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:54 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:54 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:54 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:54 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:54 DEBUG   opendrift.models.basemodel:2057:               -2.0336243859140733e-20 <- latitude  -> 8.991764920588386e-06
12:55:54 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.795962779493829e-05
12:55:54 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:54 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.349152002706938e-12 degrees.
12:55:54 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:54 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314138 (min) 0.314009 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318128 (min) 0.361524 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:54 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:54 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:54 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:54 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:54 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36001763519352e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314131 (min) 0.31415 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315118 (min) 0.337536 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382198885e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314128 (min) 0.314093 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315142 (min) 0.337603 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701566e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314094 (min) 0.313907 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313681 (min) 0.314588 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:54 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:54 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:54 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:54 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:54 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:54 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:54 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:54 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:54 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:54 DEBUG   opendrift.models.basemodel:2057:               -2.5418384592340316e-20 <- latitude  -> 8.992228190700174e-06
12:55:54 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7945328870174052e-05
12:55:54 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:54 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.368710141182787e-12 degrees.
12:55:54 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:54 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31393 (min) 0.314003 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313952 (min) 0.314644 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:54 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:54 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:54 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:54 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:54 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.383922026664004e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314086 (min) 0.314134 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315165 (min) 0.339129 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680083e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314087 (min) 0.314158 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315112 (min) 0.339157 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680086e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314122 (min) 0.314023 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318352 (min) 0.36288 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:54 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:54 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:54 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:54 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:54 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:54 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:54 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:54 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:54 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:54 DEBUG   opendrift.models.basemodel:2057:               -3.067983304144187e-20 <- latitude  -> 8.992327930282312e-06
12:55:54 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7932917442916102e-05
12:55:54 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:54 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39044140615599e-12 degrees.
12:55:54 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:54 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314036 (min) 0.313897 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317421 (min) 0.362582 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:54 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:54 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:54 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:54 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:54 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637204e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314138 (min) 0.314115 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32288 (min) 0.38488 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647923e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314136 (min) 0.314048 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322843 (min) 0.385074 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150604e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313981 (min) 0.314101 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328378 (min) 0.405771 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:54 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:54 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:54 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:54 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:54 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:54 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:54 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:54 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:54 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:54 DEBUG   opendrift.models.basemodel:2057:               -3.4898569300863206e-20 <- latitude  -> 8.992171056727129e-06
12:55:54 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7945143062543866e-05
12:55:54 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:54 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41217267112919e-12 degrees.
12:55:54 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:54 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313906 (min) 0.314086 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328789 (min) 0.405221 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:54 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:54 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:54 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:54 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:54 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4295576831077e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314107 (min) 0.314061 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334901 (min) 0.423558 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621099e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314098 (min) 0.314078 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334841 (min) 0.42311 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615742e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313964 (min) 0.314133 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340687 (min) 0.438934 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:54 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:54 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:54 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:54 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:54 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:54 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:54 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:54 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:54 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:54 DEBUG   opendrift.models.basemodel:2057:               -3.654732272294334e-20 <- latitude  -> 8.991838533741784e-06
12:55:54 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.795564841065664e-05
12:55:54 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:54 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091638e-12 degrees.
12:55:54 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:54 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314101 (min) 0.314136 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341055 (min) 0.439086 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:54 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:54 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:54 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:54 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:54 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572897e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313968 (min) 0.313961 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346242 (min) 0.452582 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588974e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314001 (min) 0.314053 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346284 (min) 0.453105 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4469426950863e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313684 (min) 0.314106 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350463 (min) 0.462349 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:54 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:54 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:54 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:54 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:54 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:54 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:54 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:54 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:54 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:54 DEBUG   opendrift.models.basemodel:2057:               -3.442850387015773e-20 <- latitude  -> 8.991756150879631e-06
12:55:54 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7964173036543938e-05
12:55:54 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:54 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080959e-12 degrees.
12:55:54 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:54 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314044 (min) 0.31414 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350361 (min) 0.461712 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:54 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:54 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:54 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:54 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:54 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086345e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314027 (min) 0.314012 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353138 (min) 0.46747 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102429e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314004 (min) 0.314079 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353053 (min) 0.467972 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599753e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314044 (min) 0.314081 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353953 (min) 0.469804 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:54 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:54 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:54 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:54 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:54 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:54 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:54 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:54 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:54 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:54 DEBUG   opendrift.models.basemodel:2057:               -2.808185051185035e-20 <- latitude  -> 8.9922222756941e-06
12:55:54 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7970865888116764e-05
12:55:54 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:54 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091664e-12 degrees.
12:55:54 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:54 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:54 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314003 (min) 0.314129 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353941 (min) 0.468855 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:54 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:54 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:54 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:54 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:54 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:54 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080892e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314095 (min) 0.313997 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352648 (min) 0.467629 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43825018909697e-12 degrees.
12:55:54 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:54 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:54 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314076 (min) 0.313966 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352754 (min) 0.467857 (max)
12:55:54 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:54 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:54 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:54 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:54 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:54 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091609e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313917 (min) 0.31399 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350213 (min) 0.462059 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:55 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:55 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:55 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:55 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:55 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:55 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:55 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:55 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:55 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:55 DEBUG   opendrift.models.basemodel:2057:               -1.77839136196845e-20 <- latitude  -> 8.992610808786997e-06
12:55:55 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7975648053656833e-05
12:55:55 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:55 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054103e-12 degrees.
12:55:55 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:55 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:55 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:55 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314025 (min) 0.314015 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350206 (min) 0.462954 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:55 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:55 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:55 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:55 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:55 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:55 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:55 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540713e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314049 (min) 0.313695 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346152 (min) 0.453604 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546074e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313899 (min) 0.3137 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346126 (min) 0.453526 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043395e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314099 (min) 0.313987 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340254 (min) 0.440602 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:55 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:55 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:55 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:55 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:55 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:55 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:55 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:55 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:55 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:55 DEBUG   opendrift.models.basemodel:2057:               -5.160018841978699e-21 <- latitude  -> 8.992876132750243e-06
12:55:55 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798016155517068e-05
12:55:55 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:55 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038042e-12 degrees.
12:55:55 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:55 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:55 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:55 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314036 (min) 0.313944 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340511 (min) 0.440014 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:55 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:55 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:55 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:55 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:55 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:55 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:55 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535373e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314007 (min) 0.314 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334516 (min) 0.422028 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038054e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31397 (min) 0.313938 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334482 (min) 0.42266 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038054e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314092 (min) 0.31415 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.327811 (min) 0.404035 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:55 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:55 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:55 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:55 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:55 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:55 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:55 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:55 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:55 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:55 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.993011078884124e-06
12:55:55 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7981966281704027e-05
12:55:55 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:55 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.483885845540749e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31412 (min) 0.313943 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32845 (min) 0.405408 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:55 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:55 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:55 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:55 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:55 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:55 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:55 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054162e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313745 (min) 0.313721 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322715 (min) 0.384468 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551486e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313945 (min) 0.313775 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322697 (min) 0.384406 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054166e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314062 (min) 0.314101 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317971 (min) 0.361772 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:55 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:55 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:55 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:55 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:55 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:55 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:55 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:55 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:55 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:55 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.993062813965469e-06
12:55:55 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7981765217829785e-05
12:55:55 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:55 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567583e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314128 (min) 0.314122 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318136 (min) 0.362011 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:55 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:55 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:55 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:55 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:55 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:55 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:55 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080968e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314124 (min) 0.313985 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314588 (min) 0.337953 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086366e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.3141 (min) 0.313981 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314624 (min) 0.337905 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589046e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314095 (min) 0.314042 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314089 (min) 0.314249 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:55 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:55 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:55 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:55 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:55 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:55 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:55 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:55 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:10.500000
12:55:55 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:55 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:55 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:55 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:55 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:55 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:55 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:55 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:55 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:55 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:55 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:55 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:55 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:55 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:55 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:55 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:55 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:55 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:55 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:55 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:55 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:55 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:22.500000 to 2000-01-01 00:00:10.500000)
12:55:55 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:55 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:55 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:55 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:55 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:55 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:55 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:55 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:55 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:22.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:55 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:55 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:55 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:55 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:55 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:55 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314085 (min) 0.31407 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3538 (min) 0.46603 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:55 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:55 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:55 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:55 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:55 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:55 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:55 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599698e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314074 (min) 0.314156 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352749 (min) 0.464641 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711846e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314043 (min) 0.314139 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352748 (min) 0.464046 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41869205062114e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314153 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350159 (min) 0.458265 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:55 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:55 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:55 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:55 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:55 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:55 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:55 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:22 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:55 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:55 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:55 DEBUG   opendrift.models.basemodel:2057:               -7.0093500961135e-20 <- latitude  -> 8.893763331288943e-06
12:55:55 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.790553513306972e-05
12:55:55 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:55 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4966 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605086e-12 degrees.
12:55:55 DEBUG   opendrift.readers.basereader.variables:829: Masking 34 elements outside coverage
12:55:55 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 34 elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 34 elements
12:55:55 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 34 elements
12:55:55 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313644 (min) 0.313993 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350122 (min) 0.459762 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:55 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:55 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:55 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:55 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:55 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:55 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:55 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615839e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314081 (min) 0.314092 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345915 (min) 0.450942 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40999954463192e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314119 (min) 0.314153 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345905 (min) 0.450922 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631927e-12 degrees.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314073 (min) 0.313839 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340587 (min) 0.438114 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:55 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:55 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:55 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:55 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:55 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:55 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:55 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:55 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:21.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:55 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:55 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:55 DEBUG   opendrift.models.basemodel:2057:               -6.521896202981702e-20 <- latitude  -> 8.937341604417568e-06
12:55:55 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7948602481896836e-05
12:55:55 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:55 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4962 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39478765915072e-12 degrees.
12:55:55 DEBUG   opendrift.readers.basereader.variables:829: Masking 38 elements outside coverage
12:55:55 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 38 elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:55 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:55 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:55 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:55 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:55 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:55 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:55 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:55 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 38 elements
12:55:55 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 38 elements
12:55:55 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:55 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:55 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314009 (min) 0.314091 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340271 (min) 0.438427 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:55 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:56 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:56 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:56 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:56 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:56 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.366537014685611e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.313869 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334211 (min) 0.422026 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.34915200270706e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314149 (min) 0.313844 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334322 (min) 0.422023 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209744e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314159 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328239 (min) 0.403399 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:56 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:56 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:56 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:56 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:56 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:56 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:56 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:21 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:56 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:56 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:56 DEBUG   opendrift.models.basemodel:2057:               -6.352769170566035e-20 <- latitude  -> 8.960821438378876e-06
12:55:56 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796713282387434e-05
12:55:56 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:56 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4963 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.305689472760719e-12 degrees.
12:55:56 DEBUG   opendrift.readers.basereader.variables:829: Masking 37 elements outside coverage
12:55:56 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 37 elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 37 elements
12:55:56 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 37 elements
12:55:56 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314105 (min) 0.313796 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328366 (min) 0.405176 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:56 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:56 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:56 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:56 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:56 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.249188183830292e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314129 (min) 0.313975 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322421 (min) 0.384316 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.229630045353974e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314142 (min) 0.313984 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322496 (min) 0.384287 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.22528379235997e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313842 (min) 0.313991 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317911 (min) 0.361542 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:56 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:56 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:56 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:56 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:56 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:56 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:56 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:20.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:56 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:56 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:56 DEBUG   opendrift.models.basemodel:2057:               -5.862246409774035e-20 <- latitude  -> 8.973559455218372e-06
12:55:56 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797495267090673e-05
12:55:56 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:56 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4969 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.238322551343684e-12 degrees.
12:55:56 DEBUG   opendrift.readers.basereader.variables:829: Masking 31 elements outside coverage
12:55:56 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 31 elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 31 elements
12:55:56 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 31 elements
12:55:56 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314002 (min) 0.313974 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31784 (min) 0.358944 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:56 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:56 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:56 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:56 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:56 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.253534436824861e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314109 (min) 0.313796 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314978 (min) 0.337169 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.229630045354363e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314149 (min) 0.313749 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314949 (min) 0.337098 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.236149424846327e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313462 (min) 0.314004 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314129 (min) 0.314828 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:56 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:56 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:56 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:56 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:56 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:56 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:56 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:20 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:56 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:56 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:56 DEBUG   opendrift.models.basemodel:2057:               -5.207517048731764e-20 <- latitude  -> 8.98087343850362e-06
12:55:56 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977884513790977e-05
12:55:56 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:56 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4977 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.257880689819496e-12 degrees.
12:55:56 DEBUG   opendrift.readers.basereader.variables:829: Masking 23 elements outside coverage
12:55:56 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 23 elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 23 elements
12:55:56 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 23 elements
12:55:56 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313587 (min) 0.312997 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314033 (min) 0.315116 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:56 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:56 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:56 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:56 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:56 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798077e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.314131 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315234 (min) 0.338849 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.260053816316833e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314122 (min) 0.314134 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315208 (min) 0.338221 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.262226942814122e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312619 (min) 0.312886 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318338 (min) 0.362053 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:56 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:56 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:56 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:56 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:56 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:56 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:56 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:56 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:56 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:56 DEBUG   opendrift.models.basemodel:2057:               -4.318452028936474e-20 <- latitude  -> 8.985462205739527e-06
12:55:56 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797835297439939e-05
12:55:56 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:56 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4986 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.281785081290007e-12 degrees.
12:55:56 DEBUG   opendrift.readers.basereader.variables:829: Masking 14 elements outside coverage
12:55:56 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 14 elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 14 elements
12:55:56 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 14 elements
12:55:56 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314085 (min) 0.3129 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318344 (min) 0.360577 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:56 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:56 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:56 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:56 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:56 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.299170093268573e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313064 (min) 0.31413 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323058 (min) 0.383893 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.281785081290007e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313288 (min) 0.314126 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322965 (min) 0.382941 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787327e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314152 (min) 0.313502 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328566 (min) 0.403725 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:56 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:56 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:56 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:56 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:56 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:56 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:56 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:56 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:56 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:56 DEBUG   opendrift.models.basemodel:2057:               -3.7713948777106196e-20 <- latitude  -> 8.988197447307933e-06
12:55:56 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977425581514878e-05
12:55:56 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:56 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4991 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.301343219765888e-12 degrees.
12:55:56 DEBUG   opendrift.readers.basereader.variables:829: Masking 9 elements outside coverage
12:55:56 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 9 elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 9 elements
12:55:56 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 9 elements
12:55:56 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313683 (min) 0.314003 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328577 (min) 0.407198 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:56 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:56 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:56 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:56 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:56 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755195e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314056 (min) 0.313957 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33459 (min) 0.411213 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.303516346263236e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314052 (min) 0.313941 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334872 (min) 0.408771 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.303516346263235e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314062 (min) 0.313969 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340872 (min) 0.422267 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:56 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:56 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:56 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:56 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:56 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:56 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:56 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:56 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:56 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:56 DEBUG   opendrift.models.basemodel:2057:               -2.683737750880212e-20 <- latitude  -> 8.989254746649268e-06
12:55:56 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7975637580740767e-05
12:55:56 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:56 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4994 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.318728231744425e-12 degrees.
12:55:56 DEBUG   opendrift.readers.basereader.variables:829: Masking 6 elements outside coverage
12:55:56 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 6 elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 6 elements
12:55:56 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 6 elements
12:55:56 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314108 (min) 0.313883 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340872 (min) 0.441521 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:56 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:56 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:56 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:56 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:56 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236407e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314045 (min) 0.313887 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346306 (min) 0.449021 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.320901358241764e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314037 (min) 0.313861 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34643 (min) 0.447991 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.320901358241118e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313735 (min) 0.313903 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350267 (min) 0.456766 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:56 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:56 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:56 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:56 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:56 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:56 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:56 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:56 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:56 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:56 DEBUG   opendrift.models.basemodel:2057:               -2.1511567960747237e-20 <- latitude  -> 8.989214607507488e-06
12:55:56 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7973231708597644e-05
12:55:56 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:56 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728347e-12 degrees.
12:55:56 DEBUG   opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
12:55:56 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 5 elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 5 elements
12:55:56 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 5 elements
12:55:56 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313849 (min) 0.314145 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350471 (min) 0.458304 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:56 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:56 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:56 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:56 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:56 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.338286370220323e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313639 (min) 0.314127 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35303 (min) 0.464771 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728364e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313677 (min) 0.314051 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352815 (min) 0.46444 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.331766990728363e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313737 (min) 0.314089 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35377 (min) 0.466118 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:56 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:56 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:56 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:56 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:56 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:56 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:56 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:56 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:56 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:56 DEBUG   opendrift.models.basemodel:2057:               -1.2170571201104338e-20 <- latitude  -> 8.988460024663449e-06
12:55:56 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7970178855239432e-05
12:55:56 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:56 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717619e-12 degrees.
12:55:56 DEBUG   opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
12:55:56 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 3 elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 3 elements
12:55:56 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 3 elements
12:55:56 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313859 (min) 0.314042 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353579 (min) 0.467679 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:56 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:56 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:56 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:56 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:56 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209594e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314021 (min) 0.313815 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352455 (min) 0.46684 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.342632623214955e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314066 (min) 0.313882 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352695 (min) 0.466244 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.342632623214955e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314015 (min) 0.314055 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350187 (min) 0.460448 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:56 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:56 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:56 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:56 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:56 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:56 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:56 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:56 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:56 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:56 DEBUG   opendrift.models.basemodel:2057:               -1.8601839459780076e-20 <- latitude  -> 8.987156221374452e-06
12:55:56 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796612340955231e-05
12:55:56 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:56 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4996 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129204251e-12 degrees.
12:55:56 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:55:56 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:55:56 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:55:56 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313584 (min) 0.313757 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.349105 (min) 0.461547 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:56 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:56 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:56 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:56 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:56 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:56 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382198861e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313932 (min) 0.31393 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346096 (min) 0.450073 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701543e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313906 (min) 0.313994 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346089 (min) 0.449769 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:56 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:56 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:56 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:56 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129204222e-12 degrees.
12:55:56 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:56 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:56 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31402 (min) 0.314116 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340659 (min) 0.436993 (max)
12:55:56 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:57 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:57 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:57 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:57 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:57 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:57 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:57 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:57 DEBUG   opendrift.models.basemodel:2057:               -1.3197943560599058e-20 <- latitude  -> 8.989705990686035e-06
12:55:57 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796025327447934e-05
12:55:57 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:57 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4987 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36001763519352e-12 degrees.
12:55:57 DEBUG   opendrift.readers.basereader.variables:829: Masking 13 elements outside coverage
12:55:57 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 13 elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 13 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 13 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314113 (min) 0.313982 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340701 (min) 0.439163 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:57 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:57 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:57 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:57 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:57 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.364363888188179e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313987 (min) 0.314081 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334269 (min) 0.423366 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690809e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313976 (min) 0.314089 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334218 (min) 0.423157 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690812e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314007 (min) 0.314018 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328364 (min) 0.404576 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:57 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:57 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:57 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:57 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:57 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:57 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:57 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:57 DEBUG   opendrift.models.basemodel:2057:               -1.5129091169756484e-20 <- latitude  -> 8.990865052301567e-06
12:55:57 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7950998970155538e-05
12:55:57 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:57 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4902 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674751e-12 degrees.
12:55:57 DEBUG   opendrift.readers.basereader.variables:829: Masking 98 elements outside coverage
12:55:57 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 98 elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 98 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 98 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314113 (min) 0.313934 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328138 (min) 0.40406 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:57 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:57 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:57 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:57 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:57 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172092e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313974 (min) 0.313909 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322393 (min) 0.383508 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37088326768013e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313973 (min) 0.314017 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322362 (min) 0.383329 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680131e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31376 (min) 0.314158 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317795 (min) 0.360903 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:57 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:57 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:57 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:57 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:57 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:57 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:57 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:57 DEBUG   opendrift.models.basemodel:2057:               -1.9350397690072718e-20 <- latitude  -> 8.991034931363211e-06
12:55:57 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7935346539577192e-05
12:55:57 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:57 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.388268279658663e-12 degrees.
12:55:57 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:57 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313757 (min) 0.314117 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318125 (min) 0.360693 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:57 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:57 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:57 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:57 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:57 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532652673e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313971 (min) 0.314114 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314559 (min) 0.337659 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.388268279658682e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313954 (min) 0.31415 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314701 (min) 0.337696 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406156005e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314015 (min) 0.313746 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314134 (min) 0.314786 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:57 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:57 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:57 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:57 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:57 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:57 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15 - step 16 of 24 - 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:57 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:57 DEBUG   opendrift.models.basemodel:2057:               -2.4946450244854134e-20 <- latitude  -> 8.990414164176808e-06
12:55:57 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7940951397707728e-05
12:55:57 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:57 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642572e-12 degrees.
12:55:57 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:57 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314137 (min) 0.314065 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313963 (min) 0.314816 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:57 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:57 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:57 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:57 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:57 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129195e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314021 (min) 0.314125 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315176 (min) 0.338787 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40348016513992e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314035 (min) 0.314148 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315124 (min) 0.339084 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139918e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313941 (min) 0.314069 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318302 (min) 0.362838 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:57 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:57 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:57 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:57 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:57 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:57 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:57 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:57 DEBUG   opendrift.models.basemodel:2057:               -3.033039283212376e-20 <- latitude  -> 8.990869047613518e-06
12:55:57 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7950041538472917e-05
12:55:57 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:57 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626476e-12 degrees.
12:55:57 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:57 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314071 (min) 0.313534 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318211 (min) 0.361745 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:57 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:57 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:57 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:57 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:57 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605059e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314151 (min) 0.313871 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322805 (min) 0.384844 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118459e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314153 (min) 0.31376 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322984 (min) 0.384311 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118459e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313857 (min) 0.314021 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328634 (min) 0.404903 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:57 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:57 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:57 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:57 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:57 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:57 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 18 of 24 - 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:57 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:57 DEBUG   opendrift.models.basemodel:2057:               -3.469327162647456e-20 <- latitude  -> 8.991650903416494e-06
12:55:57 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7958275937291188e-05
12:55:57 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:57 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107764e-12 degrees.
12:55:57 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:57 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314151 (min) 0.31412 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32864 (min) 0.406161 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:57 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:57 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:57 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:57 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:57 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588292e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314116 (min) 0.31408 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334964 (min) 0.425125 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605019e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314125 (min) 0.314043 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.335013 (min) 0.424552 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599661e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314141 (min) 0.314149 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341067 (min) 0.440394 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:57 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:57 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:57 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:57 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:57 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:57 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:57 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:57 DEBUG   opendrift.models.basemodel:2057:               -3.6283578697402174e-20 <- latitude  -> 8.992078340346838e-06
12:55:57 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7965142714787238e-05
12:55:57 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:57 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572877e-12 degrees.
12:55:57 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:57 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31397 (min) 0.314122 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340908 (min) 0.439883 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:57 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:57 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:57 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:57 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:57 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.466500833562175e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313341 (min) 0.31408 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346325 (min) 0.452762 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070215e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313306 (min) 0.314079 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346346 (min) 0.451952 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070218e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313731 (min) 0.314065 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350357 (min) 0.461176 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:57 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:57 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:57 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:57 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:57 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:57 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 20 of 24 - 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:57 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:57 DEBUG   opendrift.models.basemodel:2057:               -3.4354263413667234e-20 <- latitude  -> 8.992166337363528e-06
12:55:57 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7971120254437367e-05
12:55:57 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:57 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070234e-12 degrees.
12:55:57 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:57 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314065 (min) 0.313996 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350261 (min) 0.462697 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:57 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:57 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:57 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:57 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:57 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075617e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314156 (min) 0.31398 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353062 (min) 0.468892 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589022e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314154 (min) 0.313985 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353077 (min) 0.468635 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44476956858902e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314151 (min) 0.313994 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353888 (min) 0.470457 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:57 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:57 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:57 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:57 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:57 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:57 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:57 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:57 DEBUG   opendrift.models.basemodel:2057:               -2.793132305648897e-20 <- latitude  -> 8.991814792377097e-06
12:55:57 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797539878982119e-05
12:55:57 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:57 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610245e-12 degrees.
12:55:57 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:57 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314063 (min) 0.314045 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35393 (min) 0.470448 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:57 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:57 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:57 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:57 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:57 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572853e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313932 (min) 0.313972 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353029 (min) 0.468561 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091607e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313892 (min) 0.314025 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353036 (min) 0.468193 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44694269508625e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313623 (min) 0.314091 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350315 (min) 0.462377 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:57 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:57 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:57 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:57 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:57 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:57 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 22 of 24 - 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:57 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:57 DEBUG   opendrift.models.basemodel:2057:               -1.7678502916241675e-20 <- latitude  -> 8.990958128177748e-06
12:55:57 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7978376493147954e-05
12:55:57 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:57 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054103e-12 degrees.
12:55:57 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:57 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31361 (min) 0.314072 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350352 (min) 0.462923 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:57 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:57 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:57 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:57 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:57 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038033e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314155 (min) 0.313725 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3461 (min) 0.452975 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043393e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314119 (min) 0.313884 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346042 (min) 0.452796 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043393e-12 degrees.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.313596 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340663 (min) 0.439935 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:57 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:57 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:57 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:57 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:57 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:57 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
12:55:57 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:57 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:57 DEBUG   opendrift.models.basemodel:2057:               -5.109011213545591e-21 <- latitude  -> 8.99063486249507e-06
12:55:57 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7981451881102665e-05
12:55:57 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:57 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.490405225032682e-12 degrees.
12:55:57 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:57 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:57 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:57 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:57 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:57 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:57 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:57 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:57 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:57 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:57 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:57 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313165 (min) 0.313871 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340497 (min) 0.439159 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:57 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:57 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:57 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:57 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:57 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:58 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:58 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:58 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351530014e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314128 (min) 0.314105 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334519 (min) 0.424435 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972038052e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31415 (min) 0.314095 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334474 (min) 0.424481 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.486058972037398e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314093 (min) 0.313917 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328375 (min) 0.405741 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:58 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:58 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:58 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:58 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:58 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:58 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:58 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 24 of 24 - 5000 active elements (0 deactivated)
12:55:58 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:58 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:58 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.99142570468544e-06
12:55:58 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7983120764519953e-05
12:55:58 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:58 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535388e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314123 (min) 0.314028 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328398 (min) 0.404727 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:58 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:58 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:58 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:58 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:58 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:58 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:58 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546119e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314045 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32267 (min) 0.384942 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47519333955148e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314115 (min) 0.314001 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322653 (min) 0.384936 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546122e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313739 (min) 0.314123 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317943 (min) 0.362154 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:58 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:58 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:58 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:58 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:58 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:58 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:58 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:55:58 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:11
12:55:58 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:55:58 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:55:58 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:55:58 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:55:58 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:55:58 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:55:58 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:55:58 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:55:58 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:55:58 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:55:58 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:55:58 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:55:58 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:55:58 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:55:58 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:55:58 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:55:58 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:55:58 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:55:58 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:55:58 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:55:58 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:55:58 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:23 to 2000-01-01 00:00:11)
12:55:58 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:58 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:55:58 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:55:58 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:55:58 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 INFO    opendrift.models.basemodel:947: All points are in ocean
12:55:58 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:55:58 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:55:58 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:58 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:23 - step 1 of 24 - 5000 active elements (0 deactivated)
12:55:58 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:58 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:58 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:55:58 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:55:58 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:58 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314158 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350607 (min) 0.458938 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:58 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:58 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:58 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:58 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:58 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:58 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:58 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599698e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314077 (min) 0.314155 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352979 (min) 0.464891 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621138e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314056 (min) 0.314136 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352892 (min) 0.4644 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42086517711846e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314112 (min) 0.314112 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353653 (min) 0.466031 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:58 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:58 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:58 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:58 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:58 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:58 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:58 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:22.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
12:55:58 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:58 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:58 DEBUG   opendrift.models.basemodel:2057:               -7.025247507905308e-20 <- latitude  -> 8.893843480722923e-06
12:55:58 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.790567348513463e-05
12:55:58 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:58 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4966 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605086e-12 degrees.
12:55:58 DEBUG   opendrift.readers.basereader.variables:829: Masking 34 elements outside coverage
12:55:58 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 34 elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 34 elements
12:55:58 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 34 elements
12:55:58 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313753 (min) 0.313781 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353839 (min) 0.467621 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:58 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:58 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:58 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:58 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:58 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:58 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:58 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113157e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314139 (min) 0.314045 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352945 (min) 0.466223 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129245e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31408 (min) 0.313911 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353005 (min) 0.466373 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631929e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314156 (min) 0.314084 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35019 (min) 0.460531 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:58 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:58 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:58 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:58 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:58 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:58 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:58 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:22 - step 3 of 24 - 5000 active elements (0 deactivated)
12:55:58 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:58 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:58 DEBUG   opendrift.models.basemodel:2057:               -6.583290054467865e-20 <- latitude  -> 8.938117018187757e-06
12:55:58 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7949776976896467e-05
12:55:58 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:58 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4960 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150722e-12 degrees.
12:55:58 DEBUG   opendrift.readers.basereader.variables:829: Masking 40 elements outside coverage
12:55:58 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 40 elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 40 elements
12:55:58 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 40 elements
12:55:58 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313823 (min) 0.313856 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350161 (min) 0.460908 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:58 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:58 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:58 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:58 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:58 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:58 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:58 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.360017635193008e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314047 (min) 0.313914 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346054 (min) 0.451593 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.34263262321511e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314 (min) 0.313956 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346052 (min) 0.452071 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717793e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31415 (min) 0.313879 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340651 (min) 0.439163 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:58 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:58 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:58 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:58 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:58 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:58 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:58 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:21.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
12:55:58 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:58 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:58 DEBUG   opendrift.models.basemodel:2057:               -6.575720290983719e-20 <- latitude  -> 8.962262961663822e-06
12:55:58 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7968598559298942e-05
12:55:58 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:58 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4958 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.292650713776816e-12 degrees.
12:55:58 DEBUG   opendrift.readers.basereader.variables:829: Masking 42 elements outside coverage
12:55:58 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 42 elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 42 elements
12:55:58 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 42 elements
12:55:58 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314109 (min) 0.313945 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340334 (min) 0.439277 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:58 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:58 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:58 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:58 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:58 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:58 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:58 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.253534436824918e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.313504 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334481 (min) 0.422524 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.218764412867204e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314153 (min) 0.313572 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334486 (min) 0.422384 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.223110665862469e-12 degrees.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314031 (min) 0.314018 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328285 (min) 0.403756 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:58 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:58 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:58 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:58 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:58 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:58 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:58 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:21 - step 5 of 24 - 5000 active elements (0 deactivated)
12:55:58 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:58 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:58 DEBUG   opendrift.models.basemodel:2057:               -6.335156893366314e-20 <- latitude  -> 8.974967431294384e-06
12:55:58 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976169530840492e-05
12:55:58 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:58 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4963 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.244841930835617e-12 degrees.
12:55:58 DEBUG   opendrift.readers.basereader.variables:829: Masking 37 elements outside coverage
12:55:58 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 37 elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:58 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:58 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:58 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:58 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:58 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:58 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:58 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:58 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 37 elements
12:55:58 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 37 elements
12:55:58 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:58 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:58 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313684 (min) 0.313416 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328206 (min) 0.405452 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:58 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:58 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:58 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:58 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:58 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:58 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:59 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:59 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:59 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.268746322306096e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31415 (min) 0.313695 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322677 (min) 0.382669 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.242668804338287e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314124 (min) 0.313685 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322681 (min) 0.382446 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.244841930835609e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31415 (min) 0.313827 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317942 (min) 0.360153 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:59 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:59 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:59 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:59 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:59 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:59 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:20.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:59 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:59 DEBUG   opendrift.models.basemodel:2057:               -5.849052038963903e-20 <- latitude  -> 8.982302501077877e-06
12:55:59 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7978533666299794e-05
12:55:59 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:59 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4973 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.27526570179805e-12 degrees.
12:55:59 DEBUG   opendrift.readers.basereader.variables:829: Masking 27 elements outside coverage
12:55:59 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 27 elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 27 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 27 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313845 (min) 0.314048 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318 (min) 0.359871 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:59 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:59 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:59 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:59 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:59 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.29699696677127e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313211 (min) 0.314054 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315057 (min) 0.337508 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.277438828295357e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313457 (min) 0.31404 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31511 (min) 0.33752 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.281785081289356e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314049 (min) 0.314033 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313964 (min) 0.314885 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:59 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:59 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:59 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:59 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:59 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:59 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:20 - step 7 of 24 - 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:59 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:59 DEBUG   opendrift.models.basemodel:2057:               -5.305258691492974e-20 <- latitude  -> 8.985730880799822e-06
12:55:59 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797809652425038e-05
12:55:59 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:59 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4982 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.3035163462632e-12 degrees.
12:55:59 DEBUG   opendrift.readers.basereader.variables:829: Masking 18 elements outside coverage
12:55:59 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 18 elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 18 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 18 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314091 (min) 0.313835 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314152 (min) 0.314145 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:59 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:59 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:59 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:59 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:59 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.323074484739083e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313911 (min) 0.313815 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314979 (min) 0.33822 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.307862599257199e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314068 (min) 0.313794 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314979 (min) 0.337475 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.310035725755161e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.314025 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318369 (min) 0.361261 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:59 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:59 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:59 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:59 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:59 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:59 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:59 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:59 DEBUG   opendrift.models.basemodel:2057:               -4.4148999536871353e-20 <- latitude  -> 8.988772021613529e-06
12:55:59 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797582888129342e-05
12:55:59 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:59 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4989 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.327420737733717e-12 degrees.
12:55:59 DEBUG   opendrift.readers.basereader.variables:829: Masking 11 elements outside coverage
12:55:59 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 11 elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 11 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 11 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313241 (min) 0.313823 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318382 (min) 0.362303 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:59 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:59 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:59 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:59 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:59 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717624e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313708 (min) 0.313758 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323111 (min) 0.385752 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.33394011722566e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31378 (min) 0.313729 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323059 (min) 0.386205 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.33394011722566e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31391 (min) 0.313802 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32862 (min) 0.407129 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:59 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:59 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:59 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:59 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:59 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:59 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19 - step 9 of 24 - 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:59 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:59 DEBUG   opendrift.models.basemodel:2057:               -3.69175099649632e-20 <- latitude  -> 8.99045553098065e-06
12:55:59 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7972258658183962e-05
12:55:59 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:59 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4993 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.344805749712284e-12 degrees.
12:55:59 DEBUG   opendrift.readers.basereader.variables:829: Masking 7 elements outside coverage
12:55:59 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 7 elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 7 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 7 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314015 (min) 0.314144 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328765 (min) 0.392037 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:59 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:59 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:59 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:59 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:59 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382198864e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313942 (min) 0.313949 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.335089 (min) 0.423709 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.3491520027069e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313989 (min) 0.313943 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33503 (min) 0.424567 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.349152002706902e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313956 (min) 0.314076 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340865 (min) 0.440349 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:59 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:59 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:59 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:59 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:59 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:59 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:59 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:59 DEBUG   opendrift.models.basemodel:2057:               -2.597579710462041e-20 <- latitude  -> 8.991218240051177e-06
12:55:59 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7967728678017766e-05
12:55:59 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:59 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4996 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.357844508696202e-12 degrees.
12:55:59 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:55:59 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314073 (min) 0.313989 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340848 (min) 0.435626 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:59 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:59 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:59 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:59 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:59 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.366537014685458e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314084 (min) 0.314108 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346222 (min) 0.448888 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690809e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314085 (min) 0.314116 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346351 (min) 0.447955 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.35784450869622e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314097 (min) 0.314008 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350464 (min) 0.456735 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:59 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:59 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:59 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:59 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:59 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:59 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18 - step 11 of 24 - 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:59 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:59 DEBUG   opendrift.models.basemodel:2057:               -2.0632043619105505e-20 <- latitude  -> 8.99138075796063e-06
12:55:59 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.796236133770716e-05
12:55:59 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:59 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.370883267680105e-12 degrees.
12:55:59 DEBUG   opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
12:55:59 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 3 elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 3 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 3 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314002 (min) 0.31408 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350485 (min) 0.458984 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:59 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:59 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:59 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:59 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:59 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674759e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314032 (min) 0.314063 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353073 (min) 0.465851 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37522952067476e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314071 (min) 0.314045 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353115 (min) 0.464904 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37088326768012e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314101 (min) 0.314068 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353986 (min) 0.466606 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:59 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:59 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:59 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:59 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:59 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:59 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:59 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:59 DEBUG   opendrift.models.basemodel:2057:               -1.8836016239006215e-20 <- latitude  -> 8.991161514911372e-06
12:55:59 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.795591572535033e-05
12:55:59 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:59 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.375229520674772e-12 degrees.
12:55:59 DEBUG   opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
12:55:59 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 3 elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 3 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 3 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314043 (min) 0.313979 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35374 (min) 0.467723 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:59 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:59 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:59 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:59 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:59 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.386095153161336e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313911 (min) 0.314013 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352758 (min) 0.466325 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166697e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31387 (min) 0.314024 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352883 (min) 0.465548 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166697e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314031 (min) 0.313988 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350285 (min) 0.459772 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:59 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:59 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:59 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:59 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:59 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:59 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17 - step 13 of 24 - 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:59 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:59 DEBUG   opendrift.models.basemodel:2057:               -1.2869024134241997e-20 <- latitude  -> 8.990671976230392e-06
12:55:59 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7947597280780078e-05
12:55:59 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:59 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.39044140615599e-12 degrees.
12:55:59 DEBUG   opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
12:55:59 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 3 elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 3 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 3 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31404 (min) 0.313877 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350232 (min) 0.461897 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:59 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:59 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:59 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:59 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:59 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.390441406156e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314109 (min) 0.313147 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345573 (min) 0.452403 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.388268279658684e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314096 (min) 0.312826 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345551 (min) 0.452054 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38826827965868e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314132 (min) 0.313627 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340655 (min) 0.439188 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:59 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:59 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:59 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:59 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:59 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:59 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:59 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:59 DEBUG   opendrift.models.basemodel:2057:               -1.1745508741493283e-20 <- latitude  -> 8.989911213900746e-06
12:55:59 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7936538604294024e-05
12:55:59 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:59 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4990 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.392614532653284e-12 degrees.
12:55:59 DEBUG   opendrift.readers.basereader.variables:829: Masking 10 elements outside coverage
12:55:59 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 10 elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 10 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 10 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313797 (min) 0.314093 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340454 (min) 0.439943 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:59 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:59 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:59 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:59 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:59 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.403480165139899e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313996 (min) 0.313535 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334337 (min) 0.423225 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647936e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313983 (min) 0.313665 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33429 (min) 0.423441 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647936e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314086 (min) 0.313852 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328376 (min) 0.40476 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:55:59 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:55:59 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:55:59 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:55:59 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:55:59 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:55:59 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16 - step 15 of 24 - 5000 active elements (0 deactivated)
12:55:59 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:55:59 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:55:59 DEBUG   opendrift.models.basemodel:2057:               -1.4172332715541336e-20 <- latitude  -> 8.98992322913387e-06
12:55:59 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7942436701524404e-05
12:55:59 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:55:59 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637231e-12 degrees.
12:55:59 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:55:59 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:55:59 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314031 (min) 0.314128 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328418 (min) 0.404782 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:55:59 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:55:59 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:55:59 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:55:59 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:55:59 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:55:59 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134567e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314035 (min) 0.314145 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322631 (min) 0.384463 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40348016513993e-12 degrees.
12:55:59 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:55:59 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:55:59 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314039 (min) 0.314144 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322661 (min) 0.384424 (max)
12:55:59 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:55:59 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:55:59 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:55:59 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:55:59 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:55:59 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642608e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314153 (min) 0.314064 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318071 (min) 0.361717 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:00 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:00 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:00 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:00 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:00 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:00 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:00 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
12:56:00 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:00 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:00 DEBUG   opendrift.models.basemodel:2057:               -1.8890489507337855e-20 <- latitude  -> 8.990725713917539e-06
12:56:00 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7948742422091833e-05
12:56:00 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:00 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123804e-12 degrees.
12:56:00 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:00 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:00 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314111 (min) 0.314005 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318128 (min) 0.359603 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:00 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:00 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:00 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:00 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:00 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:00 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:00 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113097e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313847 (min) 0.314086 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31484 (min) 0.337285 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42303830361578e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313819 (min) 0.314051 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314769 (min) 0.337228 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.41869205062114e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314025 (min) 0.314122 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31404 (min) 0.31432 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:00 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:00 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:00 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:00 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:00 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:00 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:00 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15 - step 17 of 24 - 5000 active elements (0 deactivated)
12:56:00 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:00 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:00 DEBUG   opendrift.models.basemodel:2057:               -2.452040349943347e-20 <- latitude  -> 8.991178994407144e-06
12:56:00 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7955194037388174e-05
12:56:00 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:00 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113118e-12 degrees.
12:56:00 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:00 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:00 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314008 (min) 0.31402 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313602 (min) 0.314283 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:00 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:00 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:00 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:00 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:00 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:00 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:00 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113139e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314078 (min) 0.314152 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315277 (min) 0.339187 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615748e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314098 (min) 0.314151 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315246 (min) 0.338966 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615748e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313924 (min) 0.314107 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318292 (min) 0.362732 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:00 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:00 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:00 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:00 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:00 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:00 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:00 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
12:56:00 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:00 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:00 DEBUG   opendrift.models.basemodel:2057:               -3.0175783781637885e-20 <- latitude  -> 8.991336735209634e-06
12:56:00 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7961419808330107e-05
12:56:00 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:00 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097003e-12 degrees.
12:56:00 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:00 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:00 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314137 (min) 0.314092 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318293 (min) 0.362248 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:00 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:00 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:00 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:00 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:00 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:00 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:00 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4469426950863e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314107 (min) 0.313879 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32305 (min) 0.385847 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594343e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314113 (min) 0.314009 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32304 (min) 0.385502 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091664e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314088 (min) 0.31401 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328757 (min) 0.406369 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:00 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:00 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:00 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:00 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:00 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:00 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:00 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 19 of 24 - 5000 active elements (0 deactivated)
12:56:00 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:00 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:00 DEBUG   opendrift.models.basemodel:2057:               -3.448492935722252e-20 <- latitude  -> 8.991348585693357e-06
12:56:00 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7967128681693613e-05
12:56:00 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:00 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568589003e-12 degrees.
12:56:00 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:00 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:00 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314003 (min) 0.314128 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328766 (min) 0.405098 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:00 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:00 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:00 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:00 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:00 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:00 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:00 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091607e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31391 (min) 0.31403 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334947 (min) 0.424996 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605002e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313843 (min) 0.314072 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334806 (min) 0.425008 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605004e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314157 (min) 0.314157 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341054 (min) 0.440821 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:00 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:00 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:00 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:00 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:00 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:00 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:00 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
12:56:00 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:00 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:00 DEBUG   opendrift.models.basemodel:2057:               -3.626997944684851e-20 <- latitude  -> 8.991351320042408e-06
12:56:00 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7972142281966784e-05
12:56:00 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:00 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070177e-12 degrees.
12:56:00 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:00 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:00 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31366 (min) 0.314121 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340778 (min) 0.440788 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:00 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:00 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:00 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:00 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:00 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:00 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:00 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.477366466048751e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31414 (min) 0.314042 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346032 (min) 0.45352 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47302021305411e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314148 (min) 0.314012 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346255 (min) 0.453987 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.470847086556789e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313917 (min) 0.314108 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35046 (min) 0.463292 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:00 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:00 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:00 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:00 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:00 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:00 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:00 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 21 of 24 - 5000 active elements (0 deactivated)
12:56:00 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:00 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:00 DEBUG   opendrift.models.basemodel:2057:               -3.4234967396972315e-20 <- latitude  -> 8.990650811523119e-06
12:56:00 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976200282606003e-05
12:56:00 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:00 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043405e-12 degrees.
12:56:00 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:00 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:00 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314131 (min) 0.314045 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350268 (min) 0.461811 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:00 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:00 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:00 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:00 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:00 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:00 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:00 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.48605897203805e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314028 (min) 0.314069 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353041 (min) 0.468814 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043416e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314064 (min) 0.313973 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353077 (min) 0.469187 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043416e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313989 (min) 0.31393 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353976 (min) 0.471019 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:00 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:00 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:00 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:00 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:00 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:00 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:00 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
12:56:00 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:00 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:00 DEBUG   opendrift.models.basemodel:2057:               -2.7842627400784077e-20 <- latitude  -> 8.991674450099013e-06
12:56:00 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797867681098825e-05
12:56:00 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:00 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043429e-12 degrees.
12:56:00 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:00 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:00 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314113 (min) 0.313795 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353929 (min) 0.470445 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:00 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:00 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:00 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:00 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:00 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:00 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:00 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054168e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.3141 (min) 0.314026 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352886 (min) 0.467429 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064891e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314099 (min) 0.314073 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352947 (min) 0.467023 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064238e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314106 (min) 0.313967 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350348 (min) 0.461262 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:00 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:00 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:00 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:00 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:00 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:00 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:00 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 23 of 24 - 5000 active elements (0 deactivated)
12:56:00 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:00 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:00 DEBUG   opendrift.models.basemodel:2057:               -1.7616440020306985e-20 <- latitude  -> 8.992159605543848e-06
12:56:00 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7980963139097685e-05
12:56:00 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:00 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45780832757285e-12 degrees.
12:56:00 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:00 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:00 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313928 (min) 0.31411 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350304 (min) 0.46279 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:00 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:00 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:00 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:00 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:00 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:00 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:00 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043384e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314142 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345802 (min) 0.453079 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4730202130541e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314119 (min) 0.314133 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34575 (min) 0.453019 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551422e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31415 (min) 0.314048 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340606 (min) 0.440141 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:00 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:00 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:00 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:00 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:00 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:00 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:00 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
12:56:00 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:00 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:00 DEBUG   opendrift.models.basemodel:2057:               -5.068764688677494e-21 <- latitude  -> 8.992184846222396e-06
12:56:00 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.798130070497926e-05
12:56:00 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:00 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.492578351529992e-12 degrees.
12:56:00 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:00 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:00 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:00 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314022 (min) 0.31412 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340767 (min) 0.440292 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:00 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:00 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:00 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:00 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:00 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:00 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:00 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.496924604524634e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314141 (min) 0.313848 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334595 (min) 0.424629 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027313e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314127 (min) 0.313826 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334558 (min) 0.424689 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027315e-12 degrees.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31406 (min) 0.31393 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328365 (min) 0.405917 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:00 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:00 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:00 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:00 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:00 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:56:00 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:00 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:00 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:00 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:00 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:00 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:00 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:00 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:00 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:00 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:00 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:00 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:00 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:00 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:56:01 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:11.500000
12:56:01 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:56:01 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:56:01 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:56:01 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:56:01 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:56:01 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:56:01 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:56:01 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:56:01 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:56:01 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:56:01 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:56:01 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:56:01 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:56:01 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:56:01 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:56:01 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:56:01 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:56:01 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:56:01 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:56:01 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:56:01 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:56:01 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:23.500000 to 2000-01-01 00:00:11.500000)
12:56:01 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:56:01 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:56:01 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:56:01 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:56:01 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 INFO    opendrift.models.basemodel:947: All points are in ocean
12:56:01 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:56:01 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:56:01 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:01 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:23.500000 - step 1 of 24 - 5000 active elements (0 deactivated)
12:56:01 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:01 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:01 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:56:01 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:56:01 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:01 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314149 (min) 0.314118 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341083 (min) 0.437666 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:01 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:01 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:01 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:01 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:01 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:01 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:01 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599046e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314108 (min) 0.313968 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346303 (min) 0.450602 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615779e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314123 (min) 0.314 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34632 (min) 0.449985 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118459e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.314156 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350523 (min) 0.458883 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:01 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:01 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:01 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:01 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:01 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:01 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:01 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:23 - step 2 of 24 - 5000 active elements (0 deactivated)
12:56:01 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:01 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:01 DEBUG   opendrift.models.basemodel:2057:               -6.834221332247266e-20 <- latitude  -> 8.892651615852824e-06
12:56:01 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7903439664423962e-05
12:56:01 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:01 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4967 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102406e-12 degrees.
12:56:01 DEBUG   opendrift.readers.basereader.variables:829: Masking 33 elements outside coverage
12:56:01 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 33 elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 33 elements
12:56:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 33 elements
12:56:01 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313587 (min) 0.314055 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350426 (min) 0.46017 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:01 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:01 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:01 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:01 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:01 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:01 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:01 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42521143011315e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314122 (min) 0.314136 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352865 (min) 0.466931 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129243e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314132 (min) 0.314035 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353029 (min) 0.466313 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418134603e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314089 (min) 0.313986 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353813 (min) 0.468022 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:01 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:01 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:01 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:01 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:01 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:01 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:01 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:22.500000 - step 3 of 24 - 5000 active elements (0 deactivated)
12:56:01 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:01 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:01 DEBUG   opendrift.models.basemodel:2057:               -6.623104844760967e-20 <- latitude  -> 8.937666122874143e-06
12:56:01 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7948848377447173e-05
12:56:01 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:01 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4959 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785648041e-12 degrees.
12:56:01 DEBUG   opendrift.readers.basereader.variables:829: Masking 41 elements outside coverage
12:56:01 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 41 elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 41 elements
12:56:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 41 elements
12:56:01 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31378 (min) 0.313906 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353573 (min) 0.468617 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:01 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:01 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:01 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:01 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:01 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:01 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:01 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36001763519365e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314156 (min) 0.314062 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352934 (min) 0.466297 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.34263262321511e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314092 (min) 0.314151 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352998 (min) 0.467222 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717792e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314152 (min) 0.314066 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35029 (min) 0.461365 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:01 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:01 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:01 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:01 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:01 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:01 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:01 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:22 - step 4 of 24 - 5000 active elements (0 deactivated)
12:56:01 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:01 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:01 DEBUG   opendrift.models.basemodel:2057:               -6.704194880960244e-20 <- latitude  -> 8.962420483174946e-06
12:56:01 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7968675250282262e-05
12:56:01 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:01 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4954 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.296996966771455e-12 degrees.
12:56:01 DEBUG   opendrift.readers.basereader.variables:829: Masking 46 elements outside coverage
12:56:01 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 46 elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 46 elements
12:56:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 46 elements
12:56:01 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314045 (min) 0.314097 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.349974 (min) 0.46169 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:01 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:01 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:01 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:01 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:01 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:01 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:01 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.249188183830322e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314145 (min) 0.313956 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345757 (min) 0.450815 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.214418159873169e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.313931 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34568 (min) 0.450271 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.220937539365159e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313667 (min) 0.313942 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340493 (min) 0.437468 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:01 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:01 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:01 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:01 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:01 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:01 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:01 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:21.500000 - step 5 of 24 - 5000 active elements (0 deactivated)
12:56:01 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:01 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:01 DEBUG   opendrift.models.basemodel:2057:               -6.594133623957623e-20 <- latitude  -> 8.975624324392077e-06
12:56:01 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797655743867395e-05
12:56:01 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:01 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4956 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057332906e-12 degrees.
12:56:01 DEBUG   opendrift.readers.basereader.variables:829: Masking 44 elements outside coverage
12:56:01 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 44 elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 44 elements
12:56:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 44 elements
12:56:01 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314034 (min) 0.313942 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340088 (min) 0.439901 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:01 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:01 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:01 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:01 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:01 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:01 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:01 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.275265701798079e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314011 (min) 0.314092 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334356 (min) 0.421477 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.242668804338249e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31411 (min) 0.314101 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334349 (min) 0.420954 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.247015057332925e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31396 (min) 0.312741 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328322 (min) 0.402644 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:01 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:01 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:01 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:01 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:01 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:01 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:01 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:21 - step 6 of 24 - 5000 active elements (0 deactivated)
12:56:01 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:01 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:01 DEBUG   opendrift.models.basemodel:2057:               -6.346952389671703e-20 <- latitude  -> 8.98312295205998e-06
12:56:01 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797873100068948e-05
12:56:01 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:01 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4966 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.283958207787325e-12 degrees.
12:56:01 DEBUG   opendrift.readers.basereader.variables:829: Masking 34 elements outside coverage
12:56:01 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 34 elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 34 elements
12:56:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 34 elements
12:56:01 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314006 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328126 (min) 0.405527 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:01 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:01 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:01 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:01 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:01 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:01 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:01 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252475e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314144 (min) 0.31414 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322501 (min) 0.383759 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284671e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314147 (min) 0.314142 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322447 (min) 0.383692 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.290477587278637e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314158 (min) 0.313766 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318037 (min) 0.361084 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:01 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:01 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:01 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:01 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:01 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:01 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:01 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:20.500000 - step 7 of 24 - 5000 active elements (0 deactivated)
12:56:01 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:01 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:01 DEBUG   opendrift.models.basemodel:2057:               -5.869939499254376e-20 <- latitude  -> 8.98691818142112e-06
12:56:01 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7977589656808987e-05
12:56:01 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:01 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4977 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.318728231744442e-12 degrees.
12:56:01 DEBUG   opendrift.readers.basereader.variables:829: Masking 23 elements outside coverage
12:56:01 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 23 elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 23 elements
12:56:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 23 elements
12:56:01 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313967 (min) 0.313647 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318072 (min) 0.361053 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:01 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:01 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:01 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:01 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:01 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:01 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:01 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.340459496717641e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314134 (min) 0.313698 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315119 (min) 0.337075 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.320901358241761e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.313675 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31512 (min) 0.337163 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236404e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313063 (min) 0.313666 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314079 (min) 0.31419 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:01 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:01 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:01 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:01 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:01 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:01 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:01 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:20 - step 8 of 24 - 5000 active elements (0 deactivated)
12:56:01 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:01 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:01 DEBUG   opendrift.models.basemodel:2057:               -5.3073825478452033e-20 <- latitude  -> 8.9882754285925e-06
12:56:01 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7973899039972337e-05
12:56:01 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:01 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4986 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209592e-12 degrees.
12:56:01 DEBUG   opendrift.readers.basereader.variables:829: Masking 14 elements outside coverage
12:56:01 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 14 elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 14 elements
12:56:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 14 elements
12:56:01 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313944 (min) 0.313996 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314056 (min) 0.312959 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:01 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:01 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:01 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:01 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:01 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:01 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:01 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.362190761690822e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313457 (min) 0.313873 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315073 (min) 0.338811 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209576e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313251 (min) 0.313844 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314905 (min) 0.338175 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701538e-12 degrees.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312824 (min) 0.31402 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318297 (min) 0.362003 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:01 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:01 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:01 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:01 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:01 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:01 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:01 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:01 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19.500000 - step 9 of 24 - 5000 active elements (0 deactivated)
12:56:01 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:01 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:01 DEBUG   opendrift.models.basemodel:2057:               -3.833432065270653e-20 <- latitude  -> 8.990105014736031e-06
12:56:01 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7968012319927808e-05
12:56:01 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:01 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4992 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.366537014685487e-12 degrees.
12:56:01 DEBUG   opendrift.readers.basereader.variables:829: Masking 8 elements outside coverage
12:56:01 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 8 elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:01 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:01 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:01 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:01 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:01 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:01 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:01 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 8 elements
12:56:01 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 8 elements
12:56:01 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:01 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:01 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313403 (min) 0.313908 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31832 (min) 0.363169 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:01 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:02 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:02 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:02 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.377402647172058e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313831 (min) 0.313798 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323028 (min) 0.376199 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36871014118278e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313726 (min) 0.313757 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323109 (min) 0.375264 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.36871014118278e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313819 (min) 0.313723 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328698 (min) 0.395663 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:02 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:02 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19 - step 10 of 24 - 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:02 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:02 DEBUG   opendrift.models.basemodel:2057:               -3.729921522063263e-20 <- latitude  -> 8.9913384755205e-06
12:56:02 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7960261372319957e-05
12:56:02 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:02 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166717e-12 degrees.
12:56:02 DEBUG   opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
12:56:02 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 5 elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 5 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 5 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314017 (min) 0.313728 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328647 (min) 0.404602 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:02 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:02 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:02 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.386095153161378e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314099 (min) 0.313948 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.335043 (min) 0.421099 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38174890016668e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314091 (min) 0.313953 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334943 (min) 0.420067 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166738e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313883 (min) 0.31396 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340808 (min) 0.435798 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:02 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:02 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18.500000 - step 11 of 24 - 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:02 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:02 DEBUG   opendrift.models.basemodel:2057:               -3.023781372947361e-20 <- latitude  -> 8.992102089030273e-06
12:56:02 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7950968361711563e-05
12:56:02 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:02 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4996 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150615e-12 degrees.
12:56:02 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:02 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313872 (min) 0.313795 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340942 (min) 0.435738 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:02 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:02 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:02 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145272e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.3141 (min) 0.313788 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346394 (min) 0.449746 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150628e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314074 (min) 0.313667 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346381 (min) 0.448826 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647948e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313922 (min) 0.313988 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350269 (min) 0.457679 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:02 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:02 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18 - step 12 of 24 - 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:02 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:02 DEBUG   opendrift.models.basemodel:2057:               -1.1047931598573814e-20 <- latitude  -> 8.992543156357649e-06
12:56:02 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.794020092945788e-05
12:56:02 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:02 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4997 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145282e-12 degrees.
12:56:02 DEBUG   opendrift.readers.basereader.variables:829: Masking 3 elements outside coverage
12:56:02 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 3 elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 3 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 3 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314083 (min) 0.313967 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350537 (min) 0.45899 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:02 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:02 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:02 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145232e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314084 (min) 0.31386 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353079 (min) 0.466583 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647975e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314079 (min) 0.313754 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353137 (min) 0.46609 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145235e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314064 (min) 0.313775 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353992 (min) 0.467807 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:02 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:02 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17.500000 - step 13 of 24 - 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:02 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:02 DEBUG   opendrift.models.basemodel:2057:               -1.530256296929706e-20 <- latitude  -> 8.992755583404717e-06
12:56:02 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7942388024804472e-05
12:56:02 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:02 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637204e-12 degrees.
12:56:02 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:56:02 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313907 (min) 0.314063 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353566 (min) 0.469055 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:02 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:02 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:02 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123817e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313706 (min) 0.314136 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352784 (min) 0.464909 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631851e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313813 (min) 0.314139 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352715 (min) 0.465256 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.409999544631851e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313563 (min) 0.314137 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350215 (min) 0.459483 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:02 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:02 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17 - step 14 of 24 - 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:02 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:02 DEBUG   opendrift.models.basemodel:2057:               -1.0268821280475951e-20 <- latitude  -> 8.992780445164394e-06
12:56:02 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.794656766561684e-05
12:56:02 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:02 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626503e-12 degrees.
12:56:02 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:56:02 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313921 (min) 0.314113 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350215 (min) 0.461271 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:02 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:02 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:02 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621156e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314041 (min) 0.313895 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345654 (min) 0.452404 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626516e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314039 (min) 0.3137 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345823 (min) 0.452497 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129195e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314157 (min) 0.314086 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340644 (min) 0.439614 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:02 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:02 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16.500000 - step 15 of 24 - 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:02 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:02 DEBUG   opendrift.models.basemodel:2057:               -1.0076689392353445e-20 <- latitude  -> 8.992601417946182e-06
12:56:02 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7950994502585507e-05
12:56:02 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:02 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4993 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621167e-12 degrees.
12:56:02 DEBUG   opendrift.readers.basereader.variables:829: Masking 7 elements outside coverage
12:56:02 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 7 elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 7 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 7 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313805 (min) 0.314086 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340561 (min) 0.438752 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:02 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:02 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:02 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615753e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314053 (min) 0.314145 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334451 (min) 0.423599 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118433e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314102 (min) 0.314091 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334388 (min) 0.423818 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615755e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31401 (min) 0.314065 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328158 (min) 0.405088 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:02 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:02 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16 - step 16 of 24 - 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:02 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:02 DEBUG   opendrift.models.basemodel:2057:               -1.3211271409230245e-20 <- latitude  -> 8.992668910988633e-06
12:56:02 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7955363461045484e-05
12:56:02 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:02 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107725e-12 degrees.
12:56:02 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:02 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31391 (min) 0.313826 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.327975 (min) 0.40518 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:02 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:02 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:02 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599695e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314127 (min) 0.313752 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322431 (min) 0.384169 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31412 (min) 0.313973 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322354 (min) 0.384162 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102377e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313889 (min) 0.314133 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317723 (min) 0.361467 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:02 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:02 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15.500000 - step 17 of 24 - 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:02 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:02 DEBUG   opendrift.models.basemodel:2057:               -1.8287480093325716e-20 <- latitude  -> 8.992814192221743e-06
12:56:02 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7959685270666494e-05
12:56:02 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:02 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097026e-12 degrees.
12:56:02 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:02 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313985 (min) 0.31412 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317823 (min) 0.361278 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:02 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:02 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:02 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091683e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31414 (min) 0.31407 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314798 (min) 0.337575 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189097047e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314146 (min) 0.314131 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314695 (min) 0.337588 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599726e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314004 (min) 0.314151 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313415 (min) 0.314766 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:02 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:02 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15 - step 18 of 24 - 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:02 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:02 DEBUG   opendrift.models.basemodel:2057:               -2.4070461903554835e-20 <- latitude  -> 8.992974485182197e-06
12:56:02 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7963938943052206e-05
12:56:02 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:02 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605103e-12 degrees.
12:56:02 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:02 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31411 (min) 0.3141 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313956 (min) 0.314446 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:02 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:02 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:02 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086266e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31406 (min) 0.313777 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314879 (min) 0.338873 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091628e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314076 (min) 0.313613 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314717 (min) 0.338814 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588948e-12 degrees.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314136 (min) 0.314034 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318171 (min) 0.362367 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:02 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:02 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:02 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:02 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:02 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:02 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 19 of 24 - 5000 active elements (0 deactivated)
12:56:02 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:02 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:02 DEBUG   opendrift.models.basemodel:2057:               -2.9869413088301674e-20 <- latitude  -> 8.993073068717345e-06
12:56:02 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7968987459192703e-05
12:56:02 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:02 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572885e-12 degrees.
12:56:02 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:02 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:02 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:02 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:02 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:02 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:02 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:02 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:02 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:02 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:02 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:02 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314051 (min) 0.313822 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317977 (min) 0.362439 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:02 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:02 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:02 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:02 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:02 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:03 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:03 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:03 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.462154580567534e-12 degrees.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314083 (min) 0.314114 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323028 (min) 0.385523 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075577e-12 degrees.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314065 (min) 0.314081 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323055 (min) 0.385843 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45998145407022e-12 degrees.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314096 (min) 0.314114 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328636 (min) 0.406722 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:03 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:03 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:03 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:03 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:03 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:03 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:03 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 20 of 24 - 5000 active elements (0 deactivated)
12:56:03 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:03 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:03 DEBUG   opendrift.models.basemodel:2057:               -3.4265654920432626e-20 <- latitude  -> 8.993130568409217e-06
12:56:03 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7973359643351533e-05
12:56:03 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:03 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070234e-12 degrees.
12:56:03 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:03 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:03 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313651 (min) 0.313866 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328668 (min) 0.40521 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:03 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:03 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:03 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:03 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:03 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:03 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:03 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578296e-12 degrees.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314111 (min) 0.314034 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334889 (min) 0.424332 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.44911582158366e-12 degrees.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314123 (min) 0.313904 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334725 (min) 0.424943 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086342e-12 degrees.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313889 (min) 0.313912 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341051 (min) 0.440806 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:03 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:03 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:03 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:03 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:03 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:03 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:03 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 21 of 24 - 5000 active elements (0 deactivated)
12:56:03 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:03 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:03 DEBUG   opendrift.models.basemodel:2057:               -3.6105557987891904e-20 <- latitude  -> 8.993160339853084e-06
12:56:03 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797611139628675e-05
12:56:03 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:03 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599766e-12 degrees.
12:56:03 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:03 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:03 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314116 (min) 0.314027 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340784 (min) 0.440742 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:03 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:03 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:03 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:03 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:03 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:03 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:03 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599668e-12 degrees.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313956 (min) 0.314029 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346391 (min) 0.453801 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615776e-12 degrees.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313936 (min) 0.314079 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346364 (min) 0.453452 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610387e-12 degrees.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313869 (min) 0.314095 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350303 (min) 0.462729 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:03 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:03 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:03 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:03 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:03 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:03 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:03 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 22 of 24 - 5000 active elements (0 deactivated)
12:56:03 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:03 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:03 DEBUG   opendrift.models.basemodel:2057:               -3.410974673885517e-20 <- latitude  -> 8.993172094088329e-06
12:56:03 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7979211414955263e-05
12:56:03 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:03 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086285e-12 degrees.
12:56:03 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:03 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:03 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314141 (min) 0.313903 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350444 (min) 0.461765 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:03 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:03 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:03 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:03 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:03 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:03 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:03 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.464327707064841e-12 degrees.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313982 (min) 0.314154 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353042 (min) 0.468957 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.45780832757288e-12 degrees.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313852 (min) 0.314138 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353001 (min) 0.468506 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.459981454070203e-12 degrees.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313919 (min) 0.314096 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353935 (min) 0.470339 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:03 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:03 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:03 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:03 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:03 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:03 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:03 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 23 of 24 - 5000 active elements (0 deactivated)
12:56:03 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:03 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:03 DEBUG   opendrift.models.basemodel:2057:               -2.7749613663992534e-20 <- latitude  -> 8.993172683614709e-06
12:56:03 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7980767425146062e-05
12:56:03 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:03 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551428e-12 degrees.
12:56:03 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:03 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:03 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314142 (min) 0.314012 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3538 (min) 0.469674 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:03 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:03 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:03 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:03 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:03 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:03 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:03 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.48388584554072e-12 degrees.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314016 (min) 0.314084 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353042 (min) 0.468611 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546082e-12 degrees.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314029 (min) 0.314058 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353036 (min) 0.468311 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.481712719043405e-12 degrees.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314004 (min) 0.314153 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350361 (min) 0.462493 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:03 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:03 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:03 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:03 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:03 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:03 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:03 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12 - step 24 of 24 - 5000 active elements (0 deactivated)
12:56:03 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:03 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:03 DEBUG   opendrift.models.basemodel:2057:               -1.7551390153168683e-20 <- latitude  -> 8.993166124553678e-06
12:56:03 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7982847319432647e-05
12:56:03 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:03 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.488232098535373e-12 degrees.
12:56:03 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:03 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:03 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:03 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313983 (min) 0.314094 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350228 (min) 0.461589 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:03 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:03 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:03 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:03 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:03 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:03 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:03 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.49692460452463e-12 degrees.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314103 (min) 0.314101 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346095 (min) 0.452997 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027311e-12 degrees.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314098 (min) 0.314108 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346126 (min) 0.452782 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.494751478027311e-12 degrees.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313765 (min) 0.314014 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340767 (min) 0.439871 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:03 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:03 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:03 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:03 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:03 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:03 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:03 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:56:03 INFO    opendrift.models.basemodel:4706: Calculating LCS for 2000-01-01 00:00:12
12:56:03 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:56:03 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:56:03 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:56:03 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:56:03 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:56:03 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:56:03 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:56:03 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:56:03 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:56:03 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:56:03 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:56:03 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:56:03 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:56:03 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:56:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:56:03 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:56:03 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:56:03 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:56:03 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:56:03 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:56:03 INFO    opendrift.models.basemodel:1845: Backwards simulation, starting from last seeded element
12:56:03 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]) and time (2000-01-01 00:00:24 to 2000-01-01 00:00:12)
12:56:03 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:56:03 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021621621621621621, -0.00021621621621621621, 0.00023402278370072914, 0.00022502956821286667]
12:56:03 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:56:03 INFO    opendrift.models.basemodel:1928: Backwards simulation, starting at time of last seeded element
12:56:03 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:03 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:03 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:03 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:03 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:03 INFO    opendrift.models.basemodel:947: All points are in ocean
12:56:03 DEBUG   opendrift.models.basemodel:891: to be seeded: 5000, already seeded 0
12:56:03 DEBUG   opendrift.models.basemodel:909: Released 5000 new elements.
12:56:03 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:03 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:24 - step 1 of 24 - 5000 active elements (0 deactivated)
12:56:03 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:03 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:03 DEBUG   opendrift.models.basemodel:2057:               0.0 <- latitude  -> 8.813352e-06
12:56:03 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7806567e-05
12:56:03 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:03 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:03 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:03 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:03 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:03 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:03 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626471e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314082 (min) 0.314121 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3288 (min) 0.404251 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:04 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:04 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:04 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.431730809605054e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314159 (min) 0.314074 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.335091 (min) 0.422782 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621136e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314157 (min) 0.313933 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.335114 (min) 0.422235 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118457e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314135 (min) 0.314144 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34106 (min) 0.437546 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:04 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:04 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:04 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:04 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:04 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:04 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:04 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:23.500000 - step 2 of 24 - 5000 active elements (0 deactivated)
12:56:04 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:04 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:04 DEBUG   opendrift.models.basemodel:2057:               -6.459824170488197e-20 <- latitude  -> 8.890544105184437e-06
12:56:04 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7898932442448768e-05
12:56:04 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:04 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4969 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102405e-12 degrees.
12:56:04 DEBUG   opendrift.readers.basereader.variables:829: Masking 31 elements outside coverage
12:56:04 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 31 elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 31 elements
12:56:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 31 elements
12:56:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314059 (min) 0.313892 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341177 (min) 0.438867 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:04 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:04 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:04 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.427384556610467e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314149 (min) 0.313626 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346405 (min) 0.452126 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123875e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314143 (min) 0.313887 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346182 (min) 0.452065 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.414345797626558e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314034 (min) 0.314128 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350408 (min) 0.461123 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:04 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:04 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:04 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:04 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:04 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:04 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:04 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:23 - step 3 of 24 - 5000 active elements (0 deactivated)
12:56:04 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:04 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:04 DEBUG   opendrift.models.basemodel:2057:               -6.60102122224635e-20 <- latitude  -> 8.935695803674047e-06
12:56:04 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7945770447672615e-05
12:56:04 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:04 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4959 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.401307038642673e-12 degrees.
12:56:04 DEBUG   opendrift.readers.basereader.variables:829: Masking 41 elements outside coverage
12:56:04 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 41 elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 41 elements
12:56:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 41 elements
12:56:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313735 (min) 0.314159 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350522 (min) 0.462218 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:04 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:04 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:04 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.37088326768024e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314115 (min) 0.313881 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352975 (min) 0.468016 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.355671382199016e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314098 (min) 0.31382 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352736 (min) 0.467339 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.346978876209743e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314138 (min) 0.313808 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353645 (min) 0.469077 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:04 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:04 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:04 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:04 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:04 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:04 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:04 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:22.500000 - step 4 of 24 - 5000 active elements (0 deactivated)
12:56:04 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:04 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:04 DEBUG   opendrift.models.basemodel:2057:               -6.595137505655354e-20 <- latitude  -> 8.961248082926946e-06
12:56:04 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7967371497291276e-05
12:56:04 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:04 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4951 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.303516346263398e-12 degrees.
12:56:04 DEBUG   opendrift.readers.basereader.variables:829: Masking 49 elements outside coverage
12:56:04 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 49 elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 49 elements
12:56:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 49 elements
12:56:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313857 (min) 0.314144 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35392 (min) 0.470491 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:04 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:04 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:04 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.24484193083566e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314118 (min) 0.313466 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352219 (min) 0.468086 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.20572565388411e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314137 (min) 0.313597 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352507 (min) 0.467609 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.21007190687858e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314122 (min) 0.313367 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350092 (min) 0.461729 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:04 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:04 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:04 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:04 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:04 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:04 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:04 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:22 - step 5 of 24 - 5000 active elements (0 deactivated)
12:56:04 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:04 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:04 DEBUG   opendrift.models.basemodel:2057:               -6.553580361730559e-20 <- latitude  -> 8.97534573224585e-06
12:56:04 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.79762355501962e-05
12:56:04 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:04 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4947 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.242668804338283e-12 degrees.
12:56:04 DEBUG   opendrift.readers.basereader.variables:829: Masking 53 elements outside coverage
12:56:04 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 53 elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 53 elements
12:56:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 53 elements
12:56:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31414 (min) 0.313553 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350177 (min) 0.462907 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:04 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:04 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:04 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.270919448803407e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31398 (min) 0.312284 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345988 (min) 0.449774 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.23180317185164e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314003 (min) 0.31231 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346036 (min) 0.448953 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.242668804338255e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314042 (min) 0.313733 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340565 (min) 0.436324 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:04 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:04 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:04 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:04 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:04 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:04 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:04 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:21.500000 - step 6 of 24 - 5000 active elements (0 deactivated)
12:56:04 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:04 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:04 DEBUG   opendrift.models.basemodel:2057:               -6.393668134642419e-20 <- latitude  -> 8.983170465498647e-06
12:56:04 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7978720858486285e-05
12:56:04 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:04 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4953 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.28395820778669e-12 degrees.
12:56:04 DEBUG   opendrift.readers.basereader.variables:829: Masking 47 elements outside coverage
12:56:04 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 47 elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 47 elements
12:56:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 47 elements
12:56:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313577 (min) 0.314028 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.337886 (min) 0.440476 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:04 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:04 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:04 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.312208852252481e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314034 (min) 0.313604 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334551 (min) 0.423298 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.281785081289998e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314103 (min) 0.313509 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334566 (min) 0.423163 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284643e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313522 (min) 0.313579 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328262 (min) 0.404528 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:04 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:04 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:04 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:04 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:04 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:04 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:04 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:21 - step 7 of 24 - 5000 active elements (0 deactivated)
12:56:04 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:04 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:04 DEBUG   opendrift.models.basemodel:2057:               -6.090781744134395e-20 <- latitude  -> 8.987454404737474e-06
12:56:04 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797730686299112e-05
12:56:04 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:04 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4969 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236412e-12 degrees.
12:56:04 DEBUG   opendrift.readers.basereader.variables:829: Masking 31 elements outside coverage
12:56:04 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 31 elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 31 elements
12:56:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 31 elements
12:56:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314044 (min) 0.313883 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328364 (min) 0.404411 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:04 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:04 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:04 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.342632623214979e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313941 (min) 0.313602 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322586 (min) 0.383501 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.325247611236415e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313801 (min) 0.313599 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322548 (min) 0.383423 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.32742073773374e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313791 (min) 0.314152 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318059 (min) 0.36089 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:04 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:04 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:04 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:04 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:04 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:04 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:04 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:20.500000 - step 8 of 24 - 5000 active elements (0 deactivated)
12:56:04 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:04 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:04 DEBUG   opendrift.models.basemodel:2057:               -5.828478310087389e-20 <- latitude  -> 8.989629605713637e-06
12:56:04 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.79724935113462e-05
12:56:04 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:04 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4983 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.351325129204251e-12 degrees.
12:56:04 DEBUG   opendrift.readers.basereader.variables:829: Masking 17 elements outside coverage
12:56:04 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 17 elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 17 elements
12:56:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 17 elements
12:56:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313859 (min) 0.313721 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318082 (min) 0.361077 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:04 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:04 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:04 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.373056394177438e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314057 (min) 0.313817 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314735 (min) 0.337408 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.353498255701555e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313973 (min) 0.313768 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314821 (min) 0.337342 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.3578445086962e-12 degrees.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313779 (min) 0.313756 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313807 (min) 0.314689 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:04 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:04 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:04 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:04 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:04 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:04 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:04 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:20 - step 9 of 24 - 5000 active elements (0 deactivated)
12:56:04 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:04 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:04 DEBUG   opendrift.models.basemodel:2057:               -5.052410721771573e-20 <- latitude  -> 8.990418586971498e-06
12:56:04 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7964198801722317e-05
12:56:04 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:04 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4990 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.379575773669378e-12 degrees.
12:56:04 DEBUG   opendrift.readers.basereader.variables:829: Masking 10 elements outside coverage
12:56:04 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 10 elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:04 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:04 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:04 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:04 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:04 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:04 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:04 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 10 elements
12:56:04 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 10 elements
12:56:04 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:04 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:04 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313551 (min) 0.313847 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313876 (min) 0.312876 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:04 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:04 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:04 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:04 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:04 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:04 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:05 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:05 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:05 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150641e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314111 (min) 0.313971 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31525 (min) 0.339611 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.381748900166718e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31415 (min) 0.313951 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315245 (min) 0.339707 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.38174890016672e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314099 (min) 0.313842 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318211 (min) 0.363626 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:05 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:05 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:05 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:05 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:05 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:05 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:05 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19.500000 - step 10 of 24 - 5000 active elements (0 deactivated)
12:56:05 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:05 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:05 DEBUG   opendrift.models.basemodel:2057:               -3.7915374101449265e-20 <- latitude  -> 8.99022125420683e-06
12:56:05 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7952381663856813e-05
12:56:05 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:05 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4994 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.394787659150605e-12 degrees.
12:56:05 DEBUG   opendrift.readers.basereader.variables:829: Masking 6 elements outside coverage
12:56:05 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 6 elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 6 elements
12:56:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 6 elements
12:56:05 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314072 (min) 0.314002 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318367 (min) 0.353237 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:05 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:05 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:05 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:05 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:05 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:05 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:05 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637225e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314137 (min) 0.314028 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.32311 (min) 0.383511 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.396960785647943e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314094 (min) 0.314015 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323051 (min) 0.384548 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.399133912145263e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314138 (min) 0.313829 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328712 (min) 0.405237 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:05 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:05 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:05 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:05 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:05 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:05 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:05 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:19 - step 11 of 24 - 5000 active elements (0 deactivated)
12:56:05 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:05 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:05 DEBUG   opendrift.models.basemodel:2057:               -3.215548158029528e-20 <- latitude  -> 8.989315075476441e-06
12:56:05 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.794076244503719e-05
12:56:05 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:05 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4996 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.405653291637241e-12 degrees.
12:56:05 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:05 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:05 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314134 (min) 0.314043 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328734 (min) 0.402501 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:05 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:05 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:05 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:05 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:05 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:05 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:05 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.412172671129151e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313881 (min) 0.313739 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.33507 (min) 0.420794 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.40565329163719e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313975 (min) 0.313717 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334932 (min) 0.420098 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.407826418133861e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314137 (min) 0.313709 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.341085 (min) 0.435151 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:05 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:05 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:05 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:05 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:05 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:05 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:05 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18.500000 - step 12 of 24 - 5000 active elements (0 deactivated)
12:56:05 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:05 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:05 DEBUG   opendrift.models.basemodel:2057:               -1.6554773193727708e-20 <- latitude  -> 8.987912926911807e-06
12:56:05 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7946506776379034e-05
12:56:05 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:05 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.416518924123804e-12 degrees.
12:56:05 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:56:05 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:56:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:56:05 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314121 (min) 0.313969 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340897 (min) 0.437003 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:05 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:05 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:05 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:05 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:05 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:05 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:05 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113094e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314147 (min) 0.314104 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346171 (min) 0.45043 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118454e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314134 (min) 0.314093 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346301 (min) 0.449733 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621131e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314135 (min) 0.314005 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350437 (min) 0.458699 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:05 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:05 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:05 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:05 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:05 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:05 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:05 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:18 - step 13 of 24 - 5000 active elements (0 deactivated)
12:56:05 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:05 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:05 DEBUG   opendrift.models.basemodel:2057:               -2.353759982784794e-20 <- latitude  -> 8.986122379758147e-06
12:56:05 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7950825947104285e-05
12:56:05 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:05 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615782e-12 degrees.
12:56:05 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:56:05 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:56:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:56:05 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313782 (min) 0.314099 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350363 (min) 0.460636 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:05 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:05 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:05 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:05 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:05 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:05 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:05 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.423038303615792e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313789 (min) 0.313681 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352851 (min) 0.46712 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113115e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313783 (min) 0.313754 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35271 (min) 0.466384 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113113e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.3138 (min) 0.313713 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353565 (min) 0.468125 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:05 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:05 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:05 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:05 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:05 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:05 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:05 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17.500000 - step 14 of 24 - 5000 active elements (0 deactivated)
12:56:05 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:05 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:05 DEBUG   opendrift.models.basemodel:2057:               -9.602138591456247e-21 <- latitude  -> 8.983911436179173e-06
12:56:05 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7953911255617292e-05
12:56:05 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:05 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107768e-12 degrees.
12:56:05 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:56:05 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:56:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:56:05 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313824 (min) 0.313996 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353761 (min) 0.468842 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:05 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:05 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:05 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:05 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:05 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:05 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:05 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113137e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314099 (min) 0.314111 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352738 (min) 0.468002 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.420865177118493e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314076 (min) 0.314092 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352687 (min) 0.467733 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.425211430113136e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314144 (min) 0.314068 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350179 (min) 0.461894 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:05 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:05 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:05 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:05 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:05 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:05 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:05 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:17 - step 15 of 24 - 5000 active elements (0 deactivated)
12:56:05 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:05 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:05 DEBUG   opendrift.models.basemodel:2057:               -6.476434223840259e-21 <- latitude  -> 8.98647812923772e-06
12:56:05 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.79576426783168e-05
12:56:05 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:05 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4998 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107704e-12 degrees.
12:56:05 DEBUG   opendrift.readers.basereader.variables:829: Masking 2 elements outside coverage
12:56:05 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 2 elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 2 elements
12:56:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 2 elements
12:56:05 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314142 (min) 0.314048 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350315 (min) 0.462395 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:05 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:05 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:05 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:05 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:05 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:05 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:05 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43390393610235e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313997 (min) 0.314128 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346066 (min) 0.452428 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599676e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31401 (min) 0.314117 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346099 (min) 0.452471 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.436077062599672e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31411 (min) 0.314056 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340639 (min) 0.43958 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:05 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:05 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:05 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:05 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:05 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:05 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:05 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16.500000 - step 16 of 24 - 5000 active elements (0 deactivated)
12:56:05 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:05 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:05 DEBUG   opendrift.models.basemodel:2057:               -7.727061013439752e-21 <- latitude  -> 8.98931471123111e-06
12:56:05 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7960138639068698e-05
12:56:05 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:05 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4995 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.438250189096999e-12 degrees.
12:56:05 DEBUG   opendrift.readers.basereader.variables:829: Masking 5 elements outside coverage
12:56:05 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 5 elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 5 elements
12:56:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 5 elements
12:56:05 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314097 (min) 0.313982 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340546 (min) 0.439614 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:05 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:05 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:05 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:05 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:05 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:05 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:05 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086287e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313887 (min) 0.313868 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334365 (min) 0.424226 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091648e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313998 (min) 0.313809 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334448 (min) 0.424163 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091648e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314036 (min) 0.314082 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328406 (min) 0.405427 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:05 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:05 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:05 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:05 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:05 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:05 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:05 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:16 - step 17 of 24 - 5000 active elements (0 deactivated)
12:56:05 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:05 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:05 DEBUG   opendrift.models.basemodel:2057:               -1.1806934221650353e-20 <- latitude  -> 8.99055254571405e-06
12:56:05 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7964056027077027e-05
12:56:05 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:05 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583618e-12 degrees.
12:56:05 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:05 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:05 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313969 (min) 0.313997 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.327977 (min) 0.404109 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:05 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:05 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:05 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:05 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:05 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:05 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:05 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086306e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313944 (min) 0.314007 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322599 (min) 0.384333 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086311e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313962 (min) 0.314048 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322628 (min) 0.384288 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583631e-12 degrees.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314153 (min) 0.314147 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318 (min) 0.361621 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:05 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:05 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:05 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:05 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:05 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:05 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:05 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15.500000 - step 18 of 24 - 5000 active elements (0 deactivated)
12:56:05 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:05 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:05 DEBUG   opendrift.models.basemodel:2057:               -1.74165977464145e-20 <- latitude  -> 8.990667946016848e-06
12:56:05 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7967113557330978e-05
12:56:05 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:05 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086321e-12 degrees.
12:56:05 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:05 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:05 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:05 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:05 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:05 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:05 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:05 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:05 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:05 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314132 (min) 0.31409 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317892 (min) 0.361566 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:05 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:05 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:05 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:05 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:05 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:05 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:05 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:05 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:05 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:05 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:05 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:05 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:05 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.442596442091696e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314148 (min) 0.314047 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315071 (min) 0.3378 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43607706259974e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314144 (min) 0.314044 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315117 (min) 0.337856 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.440423315594386e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314055 (min) 0.313858 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314122 (min) 0.314725 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:06 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:06 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:06 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:06 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:06 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:06 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:06 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:15 - step 19 of 24 - 5000 active elements (0 deactivated)
12:56:06 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:06 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:06 DEBUG   opendrift.models.basemodel:2057:               -2.35660880928597e-20 <- latitude  -> 8.990332998465997e-06
12:56:06 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7970627179349053e-05
12:56:06 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:06 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.43825018909697e-12 degrees.
12:56:06 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:06 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:06 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31398 (min) 0.313892 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313804 (min) 0.314841 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:06 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:06 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:06 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:06 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:06 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:06 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:06 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.455635201075541e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314085 (min) 0.314136 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315211 (min) 0.339116 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.4512889480809e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314069 (min) 0.314156 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315208 (min) 0.338671 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578223e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314085 (min) 0.314107 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318217 (min) 0.362511 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:06 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:06 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:06 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:06 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:06 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:06 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:06 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14.500000 - step 20 of 24 - 5000 active elements (0 deactivated)
12:56:06 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:06 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:06 DEBUG   opendrift.models.basemodel:2057:               -2.9582282488745775e-20 <- latitude  -> 8.990397950323414e-06
12:56:06 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7974159908603002e-05
12:56:06 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:06 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.46867396005947e-12 degrees.
12:56:06 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:06 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:06 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313928 (min) 0.314085 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318294 (min) 0.363037 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:06 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:06 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:06 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:06 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:06 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:06 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:06 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.475193339551443e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314134 (min) 0.314007 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322721 (min) 0.384861 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054123e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314128 (min) 0.314038 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322926 (min) 0.38524 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054123e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313953 (min) 0.313759 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328443 (min) 0.406086 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:06 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:06 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:06 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:06 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:06 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:06 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:06 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:14 - step 21 of 24 - 5000 active elements (0 deactivated)
12:56:06 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:06 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:06 DEBUG   opendrift.models.basemodel:2057:               -3.410875979998409e-20 <- latitude  -> 8.99128839551622e-06
12:56:06 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7976346173667245e-05
12:56:06 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:06 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546092e-12 degrees.
12:56:06 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:06 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:06 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313897 (min) 0.31411 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328702 (min) 0.406892 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:06 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:06 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:06 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:06 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:06 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:06 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:06 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.479539592546108e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314153 (min) 0.314071 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.334885 (min) 0.424167 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.473020213054147e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314155 (min) 0.314108 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.335002 (min) 0.423284 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.47519333955147e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314081 (min) 0.3137 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340865 (min) 0.439113 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:06 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:06 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:06 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:06 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:06 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:06 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:06 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13.500000 - step 22 of 24 - 5000 active elements (0 deactivated)
12:56:06 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:06 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:06 DEBUG   opendrift.models.basemodel:2057:               -3.588174246244113e-20 <- latitude  -> 8.991544872019883e-06
12:56:06 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.797953284086294e-05
12:56:06 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:06 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.468673960059522e-12 degrees.
12:56:06 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:06 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:06 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313996 (min) 0.314151 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340926 (min) 0.441261 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:06 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:06 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:06 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:06 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:06 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:06 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:06 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.457808327572945e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314017 (min) 0.314109 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346316 (min) 0.450865 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.451288948080991e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314 (min) 0.314084 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.34634 (min) 0.450351 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.449115821583671e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314028 (min) 0.314131 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350335 (min) 0.459429 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:06 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:06 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:06 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:06 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:06 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:06 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:06 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:13 - step 23 of 24 - 5000 active elements (0 deactivated)
12:56:06 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:06 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:06 DEBUG   opendrift.models.basemodel:2057:               -3.393953400181886e-20 <- latitude  -> 8.991384870231899e-06
12:56:06 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7981095466315726e-05
12:56:06 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:06 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.429557683107819e-12 degrees.
12:56:06 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:06 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:06 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314092 (min) 0.314072 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350436 (min) 0.463408 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:06 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:06 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:06 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:06 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:06 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:06 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:06 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.433903936102346e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314036 (min) 0.314014 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352952 (min) 0.468962 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.418692050621107e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314037 (min) 0.314107 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353084 (min) 0.469012 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.42303830361575e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31404 (min) 0.314114 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353943 (min) 0.470837 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:06 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:06 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:06 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:06 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:06 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 5000
12:56:06 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:06 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:12.500000 - step 24 of 24 - 5000 active elements (0 deactivated)
12:56:06 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:06 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:06 DEBUG   opendrift.models.basemodel:2057:               -2.7623310974595934e-20 <- latitude  -> 8.990957568644507e-06
12:56:06 DEBUG   opendrift.models.basemodel:2062:               0.0 <- longitude -> 1.7981225512097036e-05
12:56:06 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:06 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 4901 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588966e-12 degrees.
12:56:06 DEBUG   opendrift.readers.basereader.variables:829: Masking 99 elements outside coverage
12:56:06 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 99 elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 99 elements
12:56:06 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 99 elements
12:56:06 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314032 (min) 0.31411 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.353703 (min) 0.470603 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:06 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:06 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:06 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:06 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:06 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:06 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:06 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.453462074578269e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314129 (min) 0.313931 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.352965 (min) 0.468642 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.446942695086314e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314134 (min) 0.313791 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.35293 (min) 0.468313 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.444769568588993e-12 degrees.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314063 (min) 0.313895 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.350244 (min) 0.462494 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:06 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:06 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:06 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:06 DEBUG   opendrift.models.basemodel:2124: 5000 active elements (0 deactivated)
12:56:06 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:56:06 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:06 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:06 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 5000 elements
12:56:06 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:06 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:06 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:06 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:06 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:06 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:06 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:06 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:06 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:06 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:06 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result

Make run with particles for the same period

o = o.clone()
o.disable_vertical_motion()
x = [.9]
y = [.5]
lon, lat = double_gyre.xy2lonlat(x, y)

o.seed_elements(lon, lat, radius=.15, number=2000,
                time=double_gyre.initial_time)
o.run(duration=duration, time_step=time_step,
      time_step_output=time_step_output)
o.animation(buffer=0, lcs=lcs, hide_landmask=True)
12:56:06 DEBUG   opendrift.models.oceandrift:115: No machine learning correction available.
12:56:06 DEBUG   opendrift.config:168: Adding 50 config items from environment
12:56:06 DEBUG   opendrift.config:168: Adding 5 config items from environment
12:56:06 DEBUG   opendrift.config:168: Adding 18 config items from __init__
12:56:06 DEBUG   opendrift.config:178:   Overwriting config item readers:max_number_of_fails
12:56:06 DEBUG   opendrift.config:168: Adding 5 config items from __init__
12:56:07 INFO    opendrift.models.basemodel:515: OpenDriftSimulation initialised (version 1.11.13 / v1.11.13-99-gd2132d3)
12:56:07 DEBUG   opendrift.config:168: Adding 15 config items from oceandrift
12:56:07 DEBUG   opendrift.config:178:   Overwriting config item seed:z
12:56:07 DEBUG   opendrift.models.basemodel.environment:328: Added reader double_gyre
12:56:07 INFO    opendrift.models.oceandrift:377: Setting config: drift:vertical_advection -> False
12:56:07 INFO    opendrift.models.oceandrift:377: Setting config: drift:vertical_mixing -> False
12:56:07 INFO    opendrift.models.basemodel.environment:218: Adding a dynamical landmask with max. priority based on assumed maximum speed of 2.0 m/s. Adding a customised landmask may be faster...
12:56:07 DEBUG   opendrift.readers.basereader:186: Variable mapping: ['sea_floor_depth_below_sea_level'] -> ['land_binary_mask'] is not activated
12:56:07 DEBUG   opendrift.models.basemodel.environment:328: Added reader global_landmask
12:56:07 INFO    opendrift.models.basemodel.environment:245: Fallback values will be used for the following variables which have no readers:
12:56:07 INFO    opendrift.models.basemodel.environment:248:    sea_surface_height: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    x_wind: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    y_wind: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    upward_sea_water_velocity: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    ocean_vertical_diffusivity: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_significant_height: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_x_velocity: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_stokes_drift_y_velocity: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_period_at_variance_spectral_density_maximum: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_to_direction: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    sea_surface_swell_wave_significant_height: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_to_direction: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_mean_period: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    sea_surface_wind_wave_significant_height: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    surface_downward_x_stress: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    surface_downward_y_stress: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    turbulent_kinetic_energy: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    turbulent_generic_length_scale: 0.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    ocean_mixed_layer_thickness: 50.000000
12:56:07 INFO    opendrift.models.basemodel.environment:248:    sea_floor_depth_below_sea_level: 10000.000000
12:56:07 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Config to Mode.Ready
12:56:07 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Ready to Mode.Run
12:56:07 DEBUG   opendrift.models.basemodel:1778:
------------------------------------------------------
Software and hardware:
  OpenDrift version 1.11.13
  Platform: Linux, 5.15.0-1057-aws
  68.5677490234375 GB memory
  36 processors (x86_64)
  NumPy version 1.26.4
  SciPy version 1.14.1
  Matplotlib version 3.9.1
  NetCDF4 version 1.6.1
  Xarray version 2024.10.0
  ADIOS (adios_db) version 1.1.1
  Copernicusmarine version 1.3.4
  Python version 3.11.6 | packaged by conda-forge | (main, Oct  3 2023, 10:40:35) [GCC 12.3.0]
------------------------------------------------------

12:56:07 DEBUG   opendrift.models.basemodel:1792: No output file is specified, neglecting export_buffer_length
12:56:07 DEBUG   opendrift.models.basemodel:1910: Finalizing environment and preparing readers for simulation coverage ([-0.00021222691688622895, -0.00021679325746477794, 0.0002285829130809902, 0.00022586998224456643]) and time (2000-01-01 00:00:00 to 2000-01-01 00:00:12)
12:56:07 DEBUG   opendrift.models.basemodel.environment:180:    Preparing double_gyre for extent [-0.00021222691688622895, -0.00021679325746477794, 0.0002285829130809902, 0.00022586998224456643]
12:56:07 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:180:    Preparing global_landmask for extent [-0.00021222691688622895, -0.00021679325746477794, 0.0002285829130809902, 0.00022586998224456643]
12:56:07 DEBUG   opendrift.readers.basereader.variables:549: Nothing more to prepare for global_landmask
12:56:07 INFO    opendrift.models.basemodel:936: Using existing reader for land_binary_mask
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 INFO    opendrift.models.basemodel:947: All points are in ocean
12:56:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 2000, already seeded 0
12:56:07 DEBUG   opendrift.models.basemodel:909: Released 2000 new elements.
12:56:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:00 - step 1 of 24 - 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:07 DEBUG   opendrift.models.basemodel:2057:               -5.7704125e-07 <- latitude  -> 9.653766e-06
12:56:07 DEBUG   opendrift.models.basemodel:2062:               3.9892993e-06 <- longitude -> 1.2366697e-05
12:56:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.2676586295062415e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.252419 (min) 0.284671 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314102 (min) 0.0478563 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.331765861177663e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.291155 (min) 0.269117 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315211 (min) 0.0695511 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.352410562901806e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.290735 (min) 0.270177 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315199 (min) 0.0669778 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.3556702526477854e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.295645 (min) 0.283152 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318196 (min) 0.0863955 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:07 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:00.500000 - step 2 of 24 - 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:07 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:07 DEBUG   opendrift.models.basemodel:2062:               3.5812578193304986e-06 <- longitude -> 1.2886020904817582e-05
12:56:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.4273834270594255e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.298798 (min) 0.25696 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318119 (min) 0.0860955 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.5349531886768585e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312094 (min) 0.261574 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322603 (min) 0.122044 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.56103070664471e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312105 (min) 0.263431 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322788 (min) 0.120001 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.562117269893366e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312142 (min) 0.254291 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.327874 (min) 0.128165 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:07 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:01 - step 3 of 24 - 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:07 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:07 DEBUG   opendrift.models.basemodel:2062:               2.792038809851422e-06 <- longitude -> 1.3626300044457194e-05
12:56:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.68055266399741e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.311303 (min) 0.284519 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.327358 (min) 0.145909 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.84027746155054e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.310265 (min) 0.30222 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322366 (min) 0.163344 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.869614669264364e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.311082 (min) 0.302192 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322005 (min) 0.162957 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 5.864181853021061e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313329 (min) 0.299065 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31966 (min) 0.159845 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:07 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:01.500000 - step 4 of 24 - 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:07 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:07 DEBUG   opendrift.models.basemodel:2062:               2.3433170407976688e-06 <- longitude -> 1.4768355895268097e-05
12:56:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 6.036945409558116e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.310668 (min) 0.306428 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.306897 (min) 0.173604 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 6.244478990052285e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313121 (min) 0.305608 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31279 (min) 0.178779 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 6.258604312284852e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313065 (min) 0.304283 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.310198 (min) 0.178534 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 6.248825243046906e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313016 (min) 0.304956 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.305569 (min) 0.174323 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:07 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:02 - step 5 of 24 - 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:07 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:07 DEBUG   opendrift.models.basemodel:2062:               2.020224884295447e-06 <- longitude -> 1.6080449030164012e-05
12:56:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 6.467224456027875e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.30987 (min) 0.304386 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.308334 (min) 0.179972 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 6.7258265092095796e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313532 (min) 0.310438 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.318372 (min) 0.18418 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 6.6932296117492136e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313626 (min) 0.311056 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.316013 (min) 0.178911 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 6.697575864743856e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31373 (min) 0.310863 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.315041 (min) 0.177684 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:07 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:02.500000 - step 6 of 24 - 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:07 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:07 DEBUG   opendrift.models.basemodel:2062:               1.626703756941697e-06 <- longitude -> 1.700351272362377e-05
12:56:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 6.934446652952339e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312799 (min) 0.31167 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314421 (min) 0.25176 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.1452399231924e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.311292 (min) 0.311703 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317703 (min) 0.313892 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.121335531721829e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.311113 (min) 0.312198 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314406 (min) 0.319067 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.1322011642078825e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.311216 (min) 0.312579 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31662 (min) 0.318085 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:07 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:03 - step 7 of 24 - 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:07 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:07 DEBUG   opendrift.models.basemodel:2062:               1.3601528799821806e-06 <- longitude -> 1.7471718432348866e-05
12:56:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.319090042977927e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313697 (min) 0.313515 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.311619 (min) 0.385796 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.49511328926076e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313257 (min) 0.313537 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.306212 (min) 0.420419 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.475555150784273e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31322 (min) 0.313568 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.303856 (min) 0.414678 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.471208897789635e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313505 (min) 0.313481 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.308434 (min) 0.40455 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:07 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:03.500000 - step 8 of 24 - 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:07 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:07 DEBUG   opendrift.models.basemodel:2062:               1.1692032612535178e-06 <- longitude -> 1.7644113053134e-05
12:56:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.629847132094455e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313531 (min) 0.313287 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.279902 (min) 0.424433 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.753715342441138e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313797 (min) 0.313615 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.246349 (min) 0.416034 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.72111844498134e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313768 (min) 0.313381 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.247339 (min) 0.414439 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.72111844498134e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313408 (min) 0.312279 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.256501 (min) 0.397194 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:07 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:04 - step 9 of 24 - 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:07 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:07 DEBUG   opendrift.models.basemodel:2062:               8.599814684714172e-07 <- longitude -> 1.764770696388403e-05
12:56:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.847159781825746e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313587 (min) 0.313952 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.220533 (min) 0.394525 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.951469853697072e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313457 (min) 0.314055 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.2558 (min) 0.376565 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.908007323751304e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313432 (min) 0.314056 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.250406 (min) 0.375382 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.91235357674533e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31358 (min) 0.31393 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.27004 (min) 0.354685 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:07 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:04.500000 - step 10 of 24 - 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:07 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:07 DEBUG   opendrift.models.basemodel:2062:               6.179414372133616e-07 <- longitude -> 1.777129427922612e-05
12:56:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.994932383643355e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313459 (min) 0.314113 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.270249 (min) 0.357494 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.023183028109024e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314083 (min) 0.313834 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.282163 (min) 0.335041 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.988413004151928e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314072 (min) 0.314002 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.278317 (min) 0.334454 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.99275925714656e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314047 (min) 0.314111 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.294931 (min) 0.311531 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:07 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05 - step 11 of 24 - 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:07 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:07 DEBUG   opendrift.models.basemodel:2062:               4.535055112236554e-07 <- longitude -> 1.7839960441196046e-05
12:56:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.00362488963315e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314093 (min) 0.311381 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.293169 (min) 0.310504 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.9971055101411e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31379 (min) 0.313225 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.301907 (min) 0.326371 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.971027992172658e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313758 (min) 0.313054 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.300468 (min) 0.326896 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 7.971027992172653e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313657 (min) 0.314116 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.310466 (min) 0.347406 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:07 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:05.500000 - step 12 of 24 - 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:07 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:07 DEBUG   opendrift.models.basemodel:2062:               3.33995316852893e-07 <- longitude -> 1.7862780134320513e-05
12:56:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.00362488963333e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313469 (min) 0.31379 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.313041 (min) 0.356001 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.042741166585008e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312526 (min) 0.312074 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.317412 (min) 0.364968 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.023183028109118e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312801 (min) 0.311962 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.316414 (min) 0.363214 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.02535615460644e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313534 (min) 0.309264 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.325947 (min) 0.381649 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:07 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06 - step 13 of 24 - 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:07 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:07 DEBUG   opendrift.models.basemodel:2062:               1.9920120155245995e-07 <- longitude -> 1.7861197552835202e-05
12:56:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.053606799071543e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313691 (min) 0.314046 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.323186 (min) 0.393704 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.062299305060767e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.310077 (min) 0.309764 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.330547 (min) 0.415228 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.047087419579533e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.310819 (min) 0.309522 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.329259 (min) 0.415231 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.051433672574174e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.311358 (min) 0.305968 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.3383 (min) 0.429946 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:07 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:06.500000 - step 14 of 24 - 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:07 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:07 DEBUG   opendrift.models.basemodel:2062:               1.424099879800901e-07 <- longitude -> 1.787419145324123e-05
12:56:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.07751119054156e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312627 (min) 0.288356 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340776 (min) 0.431605 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.105761835007291e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312902 (min) 0.297419 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340868 (min) 0.445983 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.094896202520696e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312903 (min) 0.299858 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.340021 (min) 0.446938 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.097069329018016e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31248 (min) 0.303938 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345771 (min) 0.455969 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:07 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07 - step 15 of 24 - 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:07 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:07 DEBUG   opendrift.models.basemodel:2062:               1.3160840439816407e-07 <- longitude -> 1.7883913412141105e-05
12:56:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.11445434099653e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.305372 (min) 0.313591 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.346545 (min) 0.45484 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.131839352974573e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.309215 (min) 0.308755 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345166 (min) 0.463431 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.12531997348309e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.309 (min) 0.308922 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.344156 (min) 0.461886 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.120973720488603e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.308816 (min) 0.308407 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.345664 (min) 0.463723 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:07 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:07.500000 - step 16 of 24 - 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:07 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:07 DEBUG   opendrift.models.basemodel:2062:               1.0998212621378495e-07 <- longitude -> 1.788579045412835e-05
12:56:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.153570617947732e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.310691 (min) 0.306305 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.344785 (min) 0.467169 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.175301882921517e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312994 (min) 0.305544 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.332783 (min) 0.464254 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.17095562992688e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312994 (min) 0.3063 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.329299 (min) 0.465072 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.173128756424202e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31318 (min) 0.305557 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.322991 (min) 0.459502 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:07 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08 - step 17 of 24 - 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:07 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:07 DEBUG   opendrift.models.basemodel:2062:               7.359096756491293e-08 <- longitude -> 1.78909605762548e-05
12:56:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.190513768402719e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:07 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31249 (min) 0.308187 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.339297 (min) 0.461604 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:07 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:07 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:07 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:07 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:07 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:07 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.207898780381244e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313187 (min) 0.313221 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.328459 (min) 0.452039 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.203552527385971e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313354 (min) 0.313154 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.326196 (min) 0.451701 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:07 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:07 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:07 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:07 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:07 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.201379400889285e-12 degrees.
12:56:07 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:07 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:07 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:07 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313502 (min) 0.312519 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.31395 (min) 0.439098 (max)
12:56:07 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:07 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:07 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:07 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:07 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:07 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:07 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:07 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:08.500000 - step 18 of 24 - 2000 active elements (0 deactivated)
12:56:07 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:07 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:07 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:07 DEBUG   opendrift.models.basemodel:2062:               3.8759007205284485e-08 <- longitude -> 1.7904977353621852e-05
12:56:07 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:07 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.216591286370487e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313466 (min) 0.312534 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.307154 (min) 0.436234 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:08 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:08 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:08 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:08 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:08 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:08 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:08 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.216591286370447e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313667 (min) 0.313799 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.302238 (min) 0.419899 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.212245033375809e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313575 (min) 0.313783 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.297455 (min) 0.421026 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.21007190687849e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313344 (min) 0.31389 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.275942 (min) 0.402676 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:08 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:08 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:08 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:08 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:08 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:08 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:08 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09 - step 19 of 24 - 2000 active elements (0 deactivated)
12:56:08 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:08 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:08 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:08 DEBUG   opendrift.models.basemodel:2062:               2.4239641466677705e-08 <- longitude -> 1.791344259751774e-05
12:56:08 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:08 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.207898780381128e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313565 (min) 0.312168 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.289114 (min) 0.401568 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:08 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:08 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:08 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:08 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:08 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:08 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:08 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.203552527386643e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314051 (min) 0.313789 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.306051 (min) 0.383667 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.19703314789469e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314038 (min) 0.313763 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.30818 (min) 0.384044 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.194860021397366e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313269 (min) 0.313183 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.30047 (min) 0.36147 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:08 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:08 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:08 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:08 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:08 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:08 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:08 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:09.500000 - step 20 of 24 - 2000 active elements (0 deactivated)
12:56:08 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:08 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:08 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:08 DEBUG   opendrift.models.basemodel:2062:               1.9560263940206216e-08 <- longitude -> 1.7922373160621952e-05
12:56:08 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:08 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.220937539365149e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313301 (min) 0.312875 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.314305 (min) 0.361689 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:08 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:08 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:08 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:08 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:08 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:08 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:08 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.238322551343726e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313289 (min) 0.312793 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.304775 (min) 0.337456 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.22528379235981e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313039 (min) 0.312861 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.303921 (min) 0.337204 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.225283792359804e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313507 (min) 0.312411 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.287983 (min) 0.313568 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:08 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:08 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:08 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:08 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:08 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:08 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:08 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10 - step 21 of 24 - 2000 active elements (0 deactivated)
12:56:08 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:08 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:08 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:08 DEBUG   opendrift.models.basemodel:2062:               1.189835898343296e-08 <- longitude -> 1.792730151670915e-05
12:56:08 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:08 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.244841930835625e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312455 (min) 0.313431 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.291058 (min) 0.313219 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:08 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:08 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:08 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:08 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:08 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:08 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:08 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.253534436824881e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.308072 (min) 0.313954 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.280329 (min) 0.337822 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.236149424846298e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.308189 (min) 0.313942 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.28025 (min) 0.337889 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.238322551343008e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.309566 (min) 0.313117 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.264825 (min) 0.361629 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:08 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:08 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:08 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:08 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:08 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:08 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:08 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:10.500000 - step 22 of 24 - 2000 active elements (0 deactivated)
12:56:08 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:08 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:08 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:08 DEBUG   opendrift.models.basemodel:2062:               8.411795128413995e-09 <- longitude -> 1.794811157853357e-05
12:56:08 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:08 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.255707563321611e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.311753 (min) 0.313613 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.281093 (min) 0.361366 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:08 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:08 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:08 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:08 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:08 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:08 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:08 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.270919448803542e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31252 (min) 0.313506 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.276025 (min) 0.384429 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.251361310327038e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.31246 (min) 0.313644 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.274392 (min) 0.384461 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.249188183830347e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.314107 (min) 0.313179 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.258136 (min) 0.405362 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:08 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:08 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:08 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:08 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:08 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:08 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:08 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11 - step 23 of 24 - 2000 active elements (0 deactivated)
12:56:08 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:08 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:08 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:08 DEBUG   opendrift.models.basemodel:2062:               6.95563470390035e-09 <- longitude -> 1.7959245533049257e-05
12:56:08 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:08 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.294823840273992e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313696 (min) 0.313789 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.268899 (min) 0.402424 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:08 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:08 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:08 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:08 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:08 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:08 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:08 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.31003572575524e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.311184 (min) 0.314071 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.247084 (min) 0.423967 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284102e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312162 (min) 0.314024 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.249469 (min) 0.424046 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.290477587278733e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.313381 (min) 0.314029 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.240822 (min) 0.439994 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:08 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:08 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:08 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:08 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:08 DEBUG   opendrift.models.basemodel:891: to be seeded: 0, already seeded 2000
12:56:08 DEBUG   opendrift.models.basemodel:2037: ======================================================================
12:56:08 INFO    opendrift.models.basemodel:2038: 2000-01-01 00:00:11.500000 - step 24 of 24 - 2000 active elements (0 deactivated)
12:56:08 DEBUG   opendrift.models.basemodel:2044: 0 elements scheduled.
12:56:08 DEBUG   opendrift.models.basemodel:2046: ======================================================================
12:56:08 DEBUG   opendrift.models.basemodel:2057:               -5.770412485617271e-07 <- latitude  -> 9.653766028350219e-06
12:56:08 DEBUG   opendrift.models.basemodel:2062:               6.558133177097597e-09 <- longitude -> 1.796617384638951e-05
12:56:08 DEBUG   opendrift.models.basemodel:2065:               z = 0.0
12:56:08 DEBUG   opendrift.models.basemodel:2068: ---------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.314381978749825e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:798: Creating empty dictionary for profiles not profided by any reader: ['ocean_vertical_diffusivity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:803:       Using fallback value 0 for ocean_vertical_diffusivity for all profiles
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.312412 (min) 0.313812 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.274545 (min) 0.438553 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_wind: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_wind: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     upward_sea_water_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_vertical_diffusivity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_x_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_stokes_drift_y_velocity: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_period_at_variance_spectral_density_maximum: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_moment: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_to_direction: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_peak_period_from_variance_spectral_density: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_swell_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_to_direction: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_mean_period: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_surface_wind_wave_significant_height: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_x_stress: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     surface_downward_y_stress: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_kinetic_energy: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     turbulent_generic_length_scale: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     ocean_mixed_layer_thickness: 50 (min) 50 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     sea_floor_depth_below_sea_level: 10000 (min) 10000 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:993: Calculating Hs from wind, min: 0.000000, mean: 0.000000, max: 0.000000
12:56:08 DEBUG   opendrift.models.physics_methods:1051: Calculating wave period Tm02 from wind
12:56:08 DEBUG   opendrift.models.physics_methods:1061:    min: 1.256637, mean: 1.256637, max: 1.256637
12:56:08 DEBUG   opendrift.models.physics_methods:1001: Calculating wave period from wind, min: 1.256637, mean: 1.256637, max: 1.256637
12:56:08 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:08 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:08 DEBUG   opendrift.models.basemodel:2109: Calling OceanDrift.update()
12:56:08 DEBUG   opendrift.models.physics_methods:767: Runge-kutta, fetching half time-step later...
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.31220885225245e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.30907 (min) 0.314005 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.291632 (min) 0.448264 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:773: Runge-kutta 4th order...
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284616e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.310557 (min) 0.31399 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.288851 (min) 0.447312 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['x_sea_water_velocity', 'y_sea_water_velocity']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader double_gyre
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from double_gyre covering 1996 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking x_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking y_sea_water_velocity for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:96: Rotating vectors between 0.0 and 8.286131334284611e-12 degrees.
12:56:08 DEBUG   opendrift.readers.basereader.variables:829: Masking 4 elements outside coverage
12:56:08 DEBUG   opendrift.models.basemodel.environment:767: Data missing for 4 elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for x_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:791:     Using fallback value 0 for y_sea_water_velocity for 4 elements
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     x_sea_water_velocity: -0.311653 (min) 0.313873 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     y_sea_water_velocity: -0.282352 (min) 0.456712 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.physics_methods:905: No wind for wind-sheared ocean drift
12:56:08 DEBUG   opendrift.models.physics_methods:933: No Stokes drift velocity available
12:56:08 DEBUG   opendrift.models.oceandrift:401: Vertical advection deactivated
12:56:08 DEBUG   opendrift.models.basemodel:1661: Horizontal diffusivity is 0, no random walk.
12:56:08 DEBUG   opendrift.models.basemodel:2124: 2000 active elements (0 deactivated)
12:56:08 DEBUG   opendrift.models.basemodel:2153: Cleaning up
12:56:08 DEBUG   opendrift.models.basemodel.environment:607: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:608: Variable group ['land_binary_mask']
12:56:08 DEBUG   opendrift.models.basemodel.environment:609: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:613: Calling reader global_landmask
12:56:08 DEBUG   opendrift.models.basemodel.environment:614: ----------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:630: Data needed for 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.variables:752: Fetching variables from global_landmask covering 2000 elements
12:56:08 DEBUG   opendrift.readers.basereader.continuous:37: Fetched env-before
12:56:08 DEBUG   opendrift.readers.basereader.variables:633: Checking land_binary_mask for invalid values
12:56:08 DEBUG   opendrift.readers.basereader.variables:788: Reader projection is latlon - rotation of vectors is not needed.
12:56:08 DEBUG   opendrift.models.basemodel.environment:764: Obtained data for all elements.
12:56:08 DEBUG   opendrift.models.basemodel.environment:777: ---------------------------------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:778: Finished processing all variable groups
12:56:08 DEBUG   opendrift.models.basemodel.environment:903: ------------ SUMMARY -------------
12:56:08 DEBUG   opendrift.models.basemodel.environment:905:     land_binary_mask: 0 (min) 0 (max)
12:56:08 DEBUG   opendrift.models.basemodel.environment:907: ---------------------------------
12:56:08 DEBUG   opendrift.models.basemodel:659: No elements hit coastline.
12:56:08 DEBUG   opendrift.models.basemodel:1710: No elements to deactivate
12:56:08 DEBUG   opendrift.models.basemodel:95: Changed mode from Mode.Run to Mode.Result
12:56:08 DEBUG   opendrift.models.basemodel:2365: Setting up map: corners=None, fast=False, lscale=None
/opt/conda/envs/opendrift/lib/python3.11/site-packages/cartopy/mpl/geoaxes.py:1692: UserWarning: No data for colormapping provided via 'c'. Parameters 'cmap', 'vmin', 'vmax' will be ignored
  result = super().scatter(*args, **kwargs)
12:56:09 DEBUG   opendrift.models.basemodel:3044: Saving animation..
12:56:09 INFO    opendrift.models.basemodel:4613: Saving animation to /root/project/docs/source/gallery/animations/example_double_gyre_LCS_particles_0.gif...
12:56:31 DEBUG   opendrift.models.basemodel:4651: MPLBACKEND = agg
12:56:31 DEBUG   opendrift.models.basemodel:4652: DISPLAY = None
12:56:31 DEBUG   opendrift.models.basemodel:4653: Time to save animation: 0:00:21.549041
12:56:31 INFO    opendrift.models.basemodel:3037: Time to make animation: 0:00:22.693889
../_images/example_double_gyre_LCS_particles_0.gif

Total running time of the script: (1 minutes 41.353 seconds)

Gallery generated by Sphinx-Gallery