mne.filter.notch_filter#

mne.filter.notch_filter(x, Fs, freqs, filter_length='auto', notch_widths=None, trans_bandwidth=1, method='fir', iir_params=None, mt_bandwidth=None, p_value=0.05, picks=None, n_jobs=None, copy=True, phase='zero', fir_window='hamming', fir_design='firwin', pad='reflect_limited', *, verbose=None)[source]#

Notch filter for the signal x.

Applies a zero-phase notch filter to the signal x, operating on the last dimension.

Parameters:

xarray

Signal to filter.

Fsfloat

Sampling rate in Hz.

freqsfloat | array of float | None

Frequencies to notch filter in Hz, e.g. np.arange(60, 241, 60). Multiple stop-bands can only be used with method=’fir’ and method=’spectrum_fit’. None can only be used with the mode ‘spectrum_fit’, where an F test is used to find sinusoidal components.

filter_lengthstr | int

Length of the FIR filter to use (if applicable):

‘auto’ (default): The filter length is chosen based on the size of the transition regions (6.6 times the reciprocal of the shortest transition band for fir_window=’hamming’ and fir_design=”firwin2”, and half that for “firwin”).
str: A human-readable time in units of “s” or “ms” (e.g., “10s” or “5500ms”) will be converted to that number of samples if phase="zero", or the shortest power-of-two length at least that duration for phase="zero-double".
int: Specified length in samples. For fir_design=”firwin”, this should not be used.

When method=='spectrum_fit', this sets the effective window duration over which fits are computed. See mne.filter.create_filter() for options. Longer window lengths will give more stable frequency estimates, but require (potentially much) more processing and are not able to adapt as well to non-stationarities.

The default in 0.21 is None, but this will change to '10s' in 0.22.

notch_widthsfloat | array of float | None

Width of the stop band (centred at each freq in freqs) in Hz. If None, freqs / 200 is used.

trans_bandwidthfloat

Width of the transition band in Hz. Only used for method='fir' and method='iir'.

methodstr

'fir' will use overlap-add FIR filtering, 'iir' will use IIR forward-backward filtering (via filtfilt()). ‘spectrum_fit’ will use multi-taper estimation of sinusoidal components. If freqs=None and method=’spectrum_fit’, significant sinusoidal components are detected using an F test, and noted by logging.

iir_paramsdict | None

Dictionary of parameters to use for IIR filtering. If iir_params=None and method="iir", 4th order Butterworth will be used. For more information, see mne.filter.construct_iir_filter().

mt_bandwidthfloat | None

The bandwidth of the multitaper windowing function in Hz. Only used in ‘spectrum_fit’ mode.

p_valuefloat

P-value to use in F-test thresholding to determine significant sinusoidal components to remove when method=’spectrum_fit’ and freqs=None. Note that this will be Bonferroni corrected for the number of frequencies, so large p-values may be justified.

pickslist | slice | None

Channels to include. Slices and lists of integers will be interpreted as channel indices. None (default) will pick all channels. Note that channels in info['bads'] will be included if their indices are explicitly provided. Only supported for 2D (n_channels, n_times) and 3D (n_epochs, n_channels, n_times) data.

n_jobsint | str

Number of jobs to run in parallel. Can be 'cuda' if cupy is installed properly and method='fir'.

copybool

If True, a copy of x, filtered, is returned. Otherwise, it operates on x in place.

phasestr

Phase of the filter. When method='fir', symmetric linear-phase FIR filters are constructed with the following behaviors when method="fir":

"zero" (default): The delay of this filter is compensated for, making it non-causal.
"minimum": A minimum-phase filter will be constructed by decomposing the zero-phase filter into a minimum-phase and all-pass systems, and then retaining only the minimum-phase system (of the same length as the original zero-phase filter) via scipy.signal.minimum_phase().
"zero-double": This is a legacy option for compatibility with MNE <= 0.13. The filter is applied twice, once forward, and once backward (also making it non-causal).
"minimum-half": This is a legacy option for compatibility with MNE <= 1.6. A minimum-phase filter will be reconstructed from the zero-phase filter with half the length of the original filter.

When method='iir', phase='zero' (default) or equivalently 'zero-double' constructs and applies IIR filter twice, once forward, and once backward (making it non-causal) using filtfilt(); phase='forward' will apply the filter once in the forward (causal) direction using lfilter().

New in v0.13.

Changed in version 1.7: The behavior for phase="minimum" was fixed to use a filter of the requested length and improved suppression.

fir_windowstr

The window to use in FIR design, can be “hamming” (default), “hann” (default in 0.13), or “blackman”.

New in v0.15.

fir_designstr

Can be “firwin” (default) to use scipy.signal.firwin(), or “firwin2” to use scipy.signal.firwin2(). “firwin” uses a time-domain design technique that generally gives improved attenuation using fewer samples than “firwin2”.

New in v0.15.

padstr

The type of padding to use. Supports all numpy.pad() mode options. Can also be "reflect_limited", which pads with a reflected version of each vector mirrored on the first and last values of the vector, followed by zeros. Only used for method='fir'. The default is 'reflect_limited'.

verbosebool | str | int | None

Control verbosity of the logging output. If None, use the default verbosity level. See the logging documentation and mne.verbose() for details. Should only be passed as a keyword argument.

Returns:

xfarray: The x array filtered.